panasonic impact drill : 53 results priced between £150.00 and £450.00

Features: Panasonics Cobalt Lithium-Ion batteries benefit from a lower internal resistance (electrical loss) than manganese lithium , which are the most widely used lithium batteries. High electrical efficiency lets cobalt lithium batteries deliver greater output than manganese lithium batteries. Cobalt lithium batteries are also less prone to increases in temperature than manganese lithium batteries , helping to prevent shortening of service life due to heat. The overcharge prevention sensor fitted...

Speed at no load (rpm) low 0-700 high 0-2350. Max. torque (Nm) high 140.0. Clutch stages 21 + drill position. Chuck size (mm) 1/4 inch hex drive. Impacts per min 0-3300.0. Width 61.0. Height 221.0. Length 193.0. Weight (incl. battery) 1.65kg.

Max. Torque: 140Nm (Impact mode). No load speeds: 0-2350rpm (Impact), 0-700 (D&D). Impact rate: 0-3300ipm. Max Torque: 0.7-4.4Nm. Weight: 1.7kg. Size (LxHxW): 193 x 221 x 61mm.

Panasonic C159LR Twinpack Combi Drill & Impact Driver 18 Volt An 18 volt Panasonic 'TOUGH TOOL IP' Combo Pack with EY7950 Combi Drill Driver and EY7550 Impact Driver, two lithium-ion batteries, charger and carry case. The EY7950 Combi Drill Driver is designed for heavy applications. 40Nm torque in soft joint offers a wide application range for drilling or screwdriving in bigger diameters. Up to 29,700 Beats /min ensure fast hammer drilling in masonry. The new motor with 4 brushes delivers outstanding...

Product Description Panasonic EYC198LZ 14.4V Cordless Li-ion Hammer Drill Driver & Impact Driver Kit 2 x Batteries (EYC198LZ) comes with the EY7940 Drill/Driver and the EY9L41 with 2 x batteries carrycase and charger. Tool 1 The EY7940 has the Panasonic TOUGH TOOL IP - IP56 Approval and has high power with 31.9Nm for applications with high torque. The Overheat Protection System (OPS) is for motor protection against overload. This model has extraordinary endurance with up to 330 screws 6x60mm...

Brand: Panasonic Product Code: PANC159LR Available For Delivery: 20 Available For Collection: Available Within 24 Hours

Chuck size: 1/4” (6.35mm) Hex Drive. Max. Torque: 150Nm, 130Nm, 26Nm. Max, Speed: 2,500/1400/1000rpm. Max. Impacts: 3300/2800/2000 bpm. Charging time: Usable 50min, full 65min. Weight inc. battery: 1.50kg. Size (LxHxW): 143 x 233 x 61mm. Max. screw dia.: M16, Wood screw 10mm, Self-drilling screw 6mm.

Hammer action with 13mm chuck. 18 stage torque clutch for precise working. Overheat Protection System (OPS) for motor protection against overload. High power with 31.9Nm for applications with high torque. Low weight with 1.75kg for working without fatigue. Handy belt hook. Indication lamps for low battery and overheat. Variable speed control.

Max instant torque 44.0 Nm, Max stalling torque 32.0 Nm. Speed at no load: low 70 - 400 rpm high 200 - 1400 rpm. Clutch stages 18 (0,5-4,4Nm) + Drill position. Chuck size 13.0 mm. Max. drill diameter - in wood 35.0mm in metal 13.0mm. Max. screwdriving - wood screw 6.8mm self-drilling screw 6.0mm. Max. holesaw - in metal 33.0mm. Width 60.0 mm. Height 221.0 mm. Length 191.0 mm. Weight (incl. battery) 1.6kg. 2 Speed -variable speed forward/reverse. Electric motor brake.

Max instant torque 44.0 Nm, Max stalling torque 32.0 Nm. Speed at no load: low 70 - 400 rpm high 200 - 1400 rpm. Clutch stages 18 (0,5-4,4Nm) + Drill position. Chuck size 13.0 mm. Max. drill diameter - in wood 35.0mm in metal 13.0mm. Max. screwdriving - wood screw 6.8mm self-drilling screw 6.0mm. Max. holesaw - in metal 33.0mm. Width 60.0 mm. Height 221.0 mm. Length 191.0 mm. Weight (incl. battery) 1.6kg. 2 Speed -variable speed forward/reverse. Electric motor brake.

Details The Panasonic EY7542 LR2S Cordless Impact Driver features two modes impact mode and drilldriver mode, the drilldriver mode has a 21 stage clutch plus drill position this combination makes this driver one of the leading tools in versatility and performance in soft and hard joint driving applications.This lightweight Driver has a 1/4inch hex drive, and is extremely user friendly as it comes equipped with an LED joblight to illuminate dark areas. It also features electronic speed controls and...

Panasonic EY7542 14.4v 3.1Ah Li-ion Multi Impact/Drill/Driver TOUGH TOOL IP

Typical Application: General construction / Joiners / carpenters / Steel / Metal / Installation / Electricians / Plumbing / Maintenance

- Typical Application : Bolt + Nut fastening / Scaffolding / Long wood screw / lag screw fastening / Wood screw / metric screw fastening

- Typical Application : Air conditioning installation / Automotive repair and maintenance / Scaffolding / Wood screw / metric screw fastening

The Panasonic EY7546X 14.4 volt Cordless Drill Driver has a brushless motor which enables a tool length of only 143mm, longer lifespan and higher working capacity. 150Nm in 'Hard mode' gives enough power to fasten bolts up to M16 whilst the 'Soft mode' provides 26Nm to reduce material surface damage and avoid stripping screw heads at smaller diameters such as M6. The new hybrid switch contributes to higher durability and robustness against water and dust.

Product Description To meet the needs of professional tradesmen around the globe, all Panasonic Cordless Power Tools are carefully constructed based on four primary principles: cordless capability, power, lightweight, and ergonomic design. Since our tools are all cordless, they can be used almost anywhere the professional requires. Our inverter charger technology used in our Ni-MH battery charging system allows for long battery pack life and quick re-charging time. Plus, there's no compromise in...

Details The Panasonic C200 LS2G 18 Volt Twinpack includes the EY74A1 X Drill & Driver and the EY75A1 X Impact Driver, it also comes supplied with two Lithium-ion batteries, Charger and handy carry case. The Panasonic EY74A1 X is a powerful 18 Volt Cordless Drill & Driver that is designed for heavy-duty use with a max torque of 42Nm. This compact and lightweight machine is ideal for use in confinded spaces and has a diverse range of applications; General construction, interior installation,electrical...

Product Description The EY7546 impacter has3 Torque settings: High 150Nm, Medium 130Nm, Low 26Nm and comes with a 1/4 inch Hex tool holder, and a brushless motor for low energy consumption. The impacter is a compact tool for improved access, it also comes with a LED light for working in dark areas 3.3Ah batteries for long-lasting run time and has a full charge in 65 minutes. The Panasonic EY7546LR2S31 is best suited for driving screws and fixings.

18 stage torque clutch for precise working. 13mm chuck. High power with 31.9 Nm maximum torque. LED light and belt hook for comfortable working. Variable speed control and forward/reverse. Electric motor brake. Two 3.3Ah batteries for long-lasting run time. Charger for all Panasonic Li-Ion batteries 10,8-28,8V.

Voltage 18V. Battery technology: Cobalt-Li-Ion. Battery capacity - Nominal 3,5Ah - Rated 3,3Ah. Connection end: Keyless chuck (1,5-13mm). Trigger: variable speed control. IP56 Approval. 18-stage clutch plus drill. right/left switch. electric motor brake. LED light for working area with switch on/off. indication lamps for low battery and overheat. Max.Torque - Hard Joint 54.0Nm - Soft Joint 40Nm. Speed at no load - Low 50-430 RPM - High 160-1650 RPM. Blows rate / Minute - Low 900-77...

- Typical application: general construction, Joiners, Carpenters, Interior Finishing, Electricians, Maintainance, Heating, Water and Sanitary Installation

Panasonic EYC199LR31 14.4v cordless drill driver & impact driver + 2 lithium ion batteries 3.3Ah. Each tool in this line earned a rating of IP56 from the IEC for dust and water resistance, Kit contains: EY7540 Impact Driver & EY7441 Hammer Drill Driver. EY7540 Impact Driver Features: Light weight weighing in a little over 3 lbs, Three Levels of impact power, High power with up 1,330 in. lbs. of torque, Compact Size at only 6-1 /2" length, Adjustable torque levels for a clean finish, Improved Ergonomic...

'Tough Tool IP' technology. This step forward provides a new level of toughness in the form of resistance to dust and water. To achieve this level, the components of the tools were specially adapted. The switches are treated with a special compound and in the Rotary Hammer an additional rubber cap ensures the switch is sealed against water and dust. The electronic circuits of the drills control panel and the battery packs, are covered by a Urethane layer for maximum protection. Inside each battery...

Max.Torque -44.1 N-m Instant torque, 33.9 N-m Stalling torque. Speed at no load - Low: 60-400 min, High: 200- 1,350 min. Clutch torque (Approx) - 0.5-4.5 N-m, (0.23 N-m per stage, total 18 stage). Charging time - Usable : 35 minutes. Weight (incl battery) - 1.6kg. Size (LxHxW) - 191 mm x 221 mm x 60 mm. Max.Drill Diameter - in wood 35mm, in metal 13mm. Max.Screw Driving - Wood Screw: 6.8mm Self drilling screw: 6mm. Max Holesaw - in Metal: 33mm. 14.4 volts.

Panasonic's EYC199LR31 ToughIP line of cordless tools offer unprecedented performance in wet or dusty conditions. Each tool in this line earned a rating of IP56 from the IEC for dust and water resistance. Both the 14.4V Li-Ion Drill/Driver & Impact Driver are great for jobs in tight or confined spaces.

- RevoLithium 14.4V Impact Wrench. - Three Levels of impact power. - Compact Size at only 6-1 /2" length. - Light weight weighing in a little over 3 lbs. - High power with up 1,640 in. lbs. of torque. - Adjustable torque levels for a clean finish. - Brush less Motor ensures longer tool life. - Built in LED Light illuminates work area. - Electronic Performance Monitoring System. - Torque High Power: up to 1,640 Inch-Pounds. - No Load Speed High /Hard Mode: 0-2,300 RPM. - No Load Speed Medium...

Voltage: 18v + 14.4v. Charging time (useable/full): 55/70 min. No-load speed (low/high): 80-600/220-1750 rpm. Max torque (stalling/instant): 32/42 Nm. Clutch torque: 0.5-4.4 Nm. Clutch stages: 18 + drill position. Max drilling diameter (wood/metal): 35/13 mm. Max holesaw size in wood: 50 mm. Size (w x l x b): 59 x 203 x 239 mm. Weight (incl. battery): 1.95 kg.

Voltage: 14.4v + 18v. Charging time (useable/full): 55/70 min. No-load speed (low/high): 80-600/220-1750 rpm. Max torque (stalling/instant): 32/42 Nm. Clutch torque: 0.5-4.4 Nm. Clutch stages: 18 + drill position. Max drilling diameter (wood/metal): 35/13 mm. Max holesaw size in wood: 50 mm. Size (w x l x b): 59 x 203 x 239 mm. Weight (incl. battery): 1.95 kg.

13mm Chuck. Variable speed and forward/reverse. Electric motor brake. Charge time (full) 65mins. Maxcimum instant torque 54.0 Nm. Maximum stalling torque 40.0 Nm. Chuck Size 13.0 mm. Width 63.0 mm. Height 248.0 mm. Length 235.0 mm. Weight including battery 2.30 kg.

No load speed: 0-1000rpm. Impact rate: 0-3800bpm. Max Wood Screws: 4.5mm dia. Max Drill Dia: Netal 13mm, Metal Holesaw 21mm, Wood 18mm. Drill capacity in concrete: SDS 3mm-16mm. Torque: 1.5-5.4Nm. Weight: 2.4kg. Size (LxHxW): 249 x 255 x 64mm.

60 Piece Set specifically designed for use with cordless impact drivers and is supplied in a heavy duty fabric holder with elasticated pockets to hold bits and drills. Contains: 2 Flat Bit Ø 16mm & 20mm, 7 Hex Drill Ø 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm & 6mm, 2 Stub Auger Ø 10mm & 13mm, 4 Masonry Drill Ø 5mm, 6mm, 7mm & 8mm, 4 Magnetic Nut Driver Ø 5/16", 8mm, 10mm & 13mm, 15 50mm Screwdriver Bits (Phillips®, Pozi®, Torx® & Square), 20 25mm Screwdriver Bits (Phillips®, Pozi®), 3 Square Drive Adaptor...

With the combination of Impact Driver mode and Drill & Driver mode, this tool offers leading versatility and performance in soft and hard joint driving applications.

TOUGH TOOL IP - IP56 Approval. Two High Capacity 3.1Ah Li-Ion Batteries for long-lasting working. Two modes: Drilldriver mode and impact mode for all drive applications. Drilldriver mode with 21 stage clutch plus drill position. Impact mode with 1/4" hex connection end. Charger for all Li-Ion batteries 10,8-28,8V.

Drill driver mode with 21 stage clutch plus drill position. Impact mode with 1/4 inch hex connection end giving heavy duty fastening with less kick back. Compact tool with low weight. Variable speed control - reversible. Electric motor brake. LED light for working in dark areas. Two 3.3Ah batteries for long-lasting run time. Full charge in 65 minutes. Charger for all Panasonic Li-Ion batteries 10,8-28,8V.