sony amplifier : 199 results priced between £50.00 and £500.00

Sony Amplifier 600 watts

In-car amplifier with 4x 60w channels, 600W Peak Power, high/low pass filters and thermal control. Power with control, car-filling 4x channel audio Prevent overheating with thermal control High efficiency air cooling system

In-car amplifier with 2x 60w channels, 350W Peak Power, high/low pass filters and thermal control. Power with control, car-filling 2x channel audio Prevent overheating with thermal control High efficiency air cooling system

Sony XM-GTR3301D Class D Mono Block 1100W Max Power Amplifier

Sony XM-GTR7040 Xplod 4 Channel Power Amplifier with 700W Channel Configuration

70 Watts (RMS), 6 stereo inputs, Remote control, Optical output

Sony 30 inch Sub pack with bass box and amplifier - 3000 Watts !!!

Detachable front panel. Variable colour illumination to match your dash. 4 x 52 W S-MOSFET power output. MP3 / WMA / ATRAC / AAC playback. Front USB Input for memory stick and iPod/iPhone. Front 3.5mm aux input for portable MP3 device. RDS (EON) Digital Clarity Tuner. Advanced Sound Engine with Digital Sound Processing for perfect in-car sound. "Quick-Browzer" - Access song by simple 'rotate and push' operation. Jump Mode for easy and fast track selection (10% increments). ZAPPIN - plays...

A bargain priced Sony TA-VE160 5 channel amplifier. It works perfectly but has various marks on it's top so I am selling it at a bargain price. It has inputs for video, tv, DVD and 5.1. It can run in stereo, 3 stereo or full 5.1 surround mode. It measures approx 430mm wide by 65mm high.

4 x 110W Max at 4 ohms. 4 x 150W Max at 2 ohms. Frequency Response (Hz) 5Hz-50KHz. Tolerance (dB) +0/-3. Balanced Input Circuit. MOSFET Power Supply. Speaker Level Input. Line In: Input sensitivity (V) 0.3 - 6.

SPECIFICATION:. Single channel MONO BASS amplifier. MAX POWER OUTPUTS:. Max. channel configuration at 4 ohm (W) 1 x 600W. Max. channel configuration at 2 ohm (W) 1 x 1100W. RMS POWER RATINGS @14.4V:. Max. channel configuration at 4 ohm (W) 1 x 250W (at 100 Hz). Max. channel configuration at 2 ohm (W) 1x 500W (at 100 Hz). AMPLIFIER:. Class D Mono Amplifier. Channel Configuration (number of stereo channels) 1. Low Pass Filter, selectable (Hz) 50 - 300. Bass Boost: Frequency (Hz), 0 - 1...

110W x 4 Max Power into 4 Ohms. 150W x 2 (at 2 Ohms) + 300W x1 (at 4 Ohms) Max Power. 60W x 2 RMS into 4 Ohms. 65W x 4 RMS into 2 Ohms. High Level Sensing Power On. 80Hz High Pass filter with -12dB/Octave Slope. 80Hz Low Pass Filter with -18dB/Octave Slope. MOSFET Power Supply. RCA & speaker level inputs. Line level thru-put. CEA-2006 Power Compliant.

A classic 1970's Sony TA1066 stereo integrated amplifier in perfect working order. A really nice sounding amp with excellent bass response and a wide dynamic range. It has two tape loops and inputs for tuner, aux and phono. It measures approx 410mm wide by 115mm high. You could connect an ipod or similar to one of the line inputs - you will need a cable that converts to 2 x rca plugs to do this (not supplied).

Max. channel configuration at 4 ohm (W) 1 x 800W. Max. channel configuration at 2 ohm (W) 1 x 1400W. RMS POWER RATINGS @14.4V:. Max. channel configuration at 4 ohm (W) 1 x 300W (at 100 Hz). Max. channel configuration at 2 ohm (W) 1x 600W (at 100 Hz). AMPLIFIER:. Class D Mono Amplifier. Channel Configuration (number of stereo channels) 1. Low Pass Filter, selectable (Hz) 50 - 300. Bass Boost: Frequency (Hz), 0 - 10db: 40Hz. Subsonic High Pass Filter (Hz) 15 Hz, -12 dB. Line In: Input sensitivity...

Great service at the Gadget show Car Audio, loved your stand and thanks for the free tickets

With up to 25 watts of driving power (802.3at), the Amplifier provides direct drive of a standard Horn speaker and supports a line-out connector for connection to an external amplifier. The interface is compatible with most SIP-based IP PBX servers that comply with the SIP RFC 3261. For non-SIP environments, the Loudspeaker Amplifier can be configured to listen to multicast address and port number combinations to form paging zones.

12" 4-ohm subwoofer. Peak Power: 1000 watts. Rated Power: 300 watts. Frequency Response: 23-2KHz. Sensitivity: 88dB/W/m. Impedance: 4 ohm. Five-sided injected Polypropylene cone. Pentagonal Diaphragm. Stoke stabiliser surround. Ferrite magnet.

A Sony STR-D611 Dolby ProLogic 5.1 surround sound amplifier in very good condition. A very powerful amp that can be used in stereo or surround mode. It has outputs for two pairs of main speakers, centre and rears, the levels to teh centre and rear channels can be adjusted. It comes without remote, hence the bargain asking price. A great unit at a sensible price. It measures approx 430mm wide by 133mm high.

Thanks for the great advice on buying the Kenwood KDC-BT52U. It arrived the next day and after fitting and using it for the last couple of days. I'm very happy with the choice and it works perfectly over bluetooth with my phone.

Sony XM-GTR2202 2 Channel Xplod Power amplifier 1400 watts

Sony XM-2002GTW Limited Edition 2 channel amplifier, 1200 watts - and wiring kit