subwoofer amplifier : 1078 results priced between £75.00 and £1,500.00

Bass Face POWER8.1 800W Active Under Seat Compact Car Subwoofer and Amplifier

Quick Overview The Polycom VTX1000 Subwoofer and Amplifier is part of the advanced VTX1000 conference phone kit with wideband audio capabilities. This integrated amplifier and subwoofer provides a response bandwidth for a complete range of vocal frequencies from 80 - 300 Hz. This unit is an essential part of the VTX's audio capabilities for an ultimate in high definition conference experience! The integrated amplifier and subwoofer can be purchased separately or together with the Polycom SoundStation...

JBL GT5-Bundle Amplifier and Subwoofer

Bass Face DB1.1 1500W Monoblock Subwoofer Amplifier for Car

Pioneer SDV55SWK Subwoofer/Amplifier in Black houses the system's 5.1 channel surround amplifier and completes the surround sound experience. Place Pioneer S-DV55SW-K where you want, sit back and enjoy all the thrill and excitement of the cinema in the comfort of your home.

Maximum input power - 150w Built-in amplifier Frequency response - 35 - 200 Hz . Woofer size (cm) - 20 cm RCA/speaker level inputs - Yes .

Bass Face POWER12.1 1300W Active Car Subwoofer Built In Amplifier

In Phase Audio D28 Double Active Subwoofer Enclosure with 2000 W Built in Amplifier, 8 - inch

The SC-600D amplifier is a 400-watt dynamic, 200-watt RMS, two unit high, rack-mountable amplifier. This proven, reliable A/B design is very musical sounding, with superior headroom for clean, powerful bass. The SC-600 amp drives the SC-600 IW (In-Wall) and SC-600 IF/IC (In-Floor/In-Ceiling) subwoofers. The SC-600D amplifier includes a remote control with four bass presets to customize your movie or music listening. Using the remote control's "EQ" button, the internal signal generator's tones are...

Impedance: 8 Ω. Frequency Range: 25 — 300 Hz. Maximum Input Power: 65 W. Sensitivity (1m/V): 81.2 dB. Dimensions: 430 x 190 x 425 mm (H x W x D). Weight: 13.8 kg.

The website was easy to use but liked the fact they had a shop near by. Went to the Nottingham shop and brought a parrot for my work carried. The price was the cheapest and fitting was cheap. Great service.

Alpine packs Class-D amplifier technology into their PDX amplifiers for awesome power from a 2" tall frame. These small-but-mighty amps run so cool they can be stacked together into a single unit — their heatsinks couple together to cool the entire stack. Each amp offers an 8" by 10" footprint, so they'll fit in hatchbacks, trunks, truck cabs, and any vehicles with limited space.

Amplifier class D. Number of channels 2. Output power in 4 ohm 2 x 120 W RMS. Output power in 2 ohm 2 x 200 W RMS. Mono bridge mode 4 ohm 400 W RMS. S/N ratio, A-weighted > 100 dB. Damping factor > 100. Frequency range 10 Hz - 35 kHz. Input impedance 33 kohm. Input impedance, high level 1 kohm. High level input with auto start 1. Low level output 1. Input sensitivity 0,3-6 V. Phase control for subwoofers 0 - 180 degrees cont. variable. High pass filter 15-150 Hz. Low pass filter 5...

1200W Max Power. 700W RMS x 1 at 2 ohms. 400W RMS x 1 at 4 ohms. Class-D Circuit. PWM Regulated MOS-FET Power Supply. MOS-FET Output Stage. Frequency Response: 20 - 300Hz (0, -3dB). S/N: more than 60dBA at 2Vrms. LPF (50-300Hz, -18dB/oct). LED Illumination.

* Incredibly easy to install and configure. * 1250 watt RMS (3,000 watt peak) amplifier power. * Reliable Class D Energy Recovery System (ERS) switching design (patented). * System friendly features: 12V trigger, IR repeater jack, RS-232 controllable (Crestron Certified). * Easily configured for up to TWO subwoofers. * Comes complete with remote, microphone and rack mount hardware.

Rated Power: 300 W RMS @ 2 ohm (14.5V). Rated Power 14.4 V: 200W RMS x 1 @ 4 ohms 300W RMS x 1 @ 2 ohms. Rated Power 12.5 V: 160W RMS x 1 @ 4 ohms 270W RMS x 1 @ 2 ohms. THD at Rated Power: 1% @ 2 ohm. S/N Ratio: >100 dB referred to rated power. (A-weighted, 20 Hz-20 kHz noise bandwidth). >80 dB referred to 1W. (A-weighted, 20 Hz-20 kHz noise bandwidth). Frequency Response: 10 Hz - 1KHz (+0, -1dB). Damping Factor: >120 @ 4 ohms / 50 Hz. >60 @ 2 ohms / 50 Hz. Input Range: 100mV - 4V RMS...

The Velodyne SC-1250 is the partner to their fantastic SC-IWDVR in-wall subwoofer. Packing a stunning 3000 watts of peak power this beast can drive up to two in-wall subwoofers for ultimate invisible bass performance. The SubContractor Series is a complete line of powerful, easy-to-install subwoofers designed to meet any custom installation need, whether it's in-room, in-wall, in-floor or in-ceiling. At the heart of the SC Series is the 1250 watt SC-1250 rack-mountable amplifier with a built-in ...

The MRX-M50 mono amp puts out up to 1,000 watts RMS to your subwoofer system, so you can fill your listening space with plenty of bass. And it'll operate safely with a 1-ohm load, making it useful in a variety of sub system installations. Onboard low-pass and subsonic filters let you get the best sound out of your setup, while a bass boost helps to fatten up the sound if you need it.

Type Class D. Waterproof No. Conformal Coated PCB Yes. Inputs RCA (Phono). Output Channels 1. Power (RMS) 600 W. Power (max) 1500 W. Frequency Response 20 - 20,000 Hz. Total Harmonic Distortion (THD) <1 %. Signal to Noise Ratio (SNR) 76 dB. Current Consumption (max) 80 A. Current Consumption (nominal). Waterproof Volume Control No. 2 Ohm Stable Yes. Protection Circuit Yes. Dimensions (WxDxH) 257 x 192 x 62 mm. Weight 3.11 Kg. Additional Features Stackable design.

This was the first time I had used car audio center and I have to say I was very impressed. Very easy to navigate the website no awkward clicking and blindly wondering through looking for the right item. The product I ordered was a head unit which gave me all the specification I needed. Upon ordering I received an email confirming my order and explaining the delivery method and further correspondence. The next morning I had another email confirming the dispatch of the item with a tracking number...

A rather belated thank you for your honesty and excellent service, once again! I have not as yet received my credit card bill but I calculate that the cost of the freezer is now £89.99.

The MRX-M50 mono amp puts out up to 500 watts RMS to your subwoofer, so you can fill your listening space with plenty of bass. And it'll operate safely with a 1-ohm load, making it useful in a variety of sub system installations. Onboard low-pass and subsonic filters let you get the best sound out of your setup, while a bass boost helps to fatten up the sound if you need it.

Edge Car Audio EDP10 Bass Pack with 10 Inch Subwoofer + 2 Channel Amplifier

KEF's Q400b subwoofer is a closed box design woofer driven by a 200W on-board Class-D amplifier, this discreet cube creates spectacular bass imagery – eloquent, musical and addictively physical. Anchoring the whole sound performance in an all-embracing sensation of immediacy, it completes the acoustic picture.

This is our Entry Level Home Theatre Packing using the Onkyo TX-SR309 The system comprises of: 1 x Onkyo TX-SR313 5.1 Amplifier 1 x Polk PSW110B Black Subwoofer 5 x Adastra 75W 6.25" in Ceiling Speakers 1 x 100M Reel of Transparent speaker cable, 2 x 96/0.1, 6A, Clear/Red, 100m

KIT CONTENTS.>5mx8mmsq Red Power Cable>0.5x8mmsq Black Earth Cable>5m Double Screened Phono Cable>5m Remote switch lead>2mx4mm OFC Speaker Cable>Maxi Fuse Holder(Terminated to Cable)> 2x60 Amp Maxi Fuse>Terminal for speaker connections.

Great service at the Gadget show Car Audio, loved your stand and thanks for the free tickets

Amplifier Type: Class-D (Digital). Channel Design: 1 Channel (Mono). Thermal Control: Thermal Management Control. Power Supply: MOSFET. Power Supply Design: DC-DC PWM Power Supply. Board Circuitry: S.T.A.R. Circuitry. Current Protection: Over-Current, Over-Voltage and Thermal Protection. Power Indicator: Top Mounted Blue LED Power Indicator. Speaker Level Inputs. Crossover: Variable Lowpass Filter. Built-in Bass EQ. Built-in Subsonic Filter. Final Outputs: Direct FET. Board Design: ...

Variable phase 0 or 180°. Protections Short-circuit, continuous current, thermal overload. Dimensions ( H x W x D) 2-3/8 x 14-3/4 x 7-11/16“(60x375x195mm). Nominal power measured at 13.8V continuously @ 4 Ohm 1x350W rms. Nominal power measured at 13.8V continuously @ 2 Ohm 1x500W rms. Signal/noise ratio >85dB (A). Frequency response 10Hz – 150Hz.

Mono subwoofer amplifier. 320 watts RMS x 1 at 4 ohms (550 watts RMS x 1 at 2 ohms). 1-ohm stable (800 watts RMS x 1 at 1 ohm). CEA-2006 compliant. Variable low-pass filters (50-500 Hz, 12 dB/octave). Switchable subsonic filter (20 Hz, 24 dB/octave). Variable bass boost (0-9 dB at 45 Hz). Phase switch. Class-D amplifier design. Thermostat-controlled, progressive-speed cooling fan. Dynamic soft clipping protects speakers from distortion. Remote level control. Optional High Cap outboard...

Description: Class D Monoblock Subwoofer Amplifier. Patented Technology: High-Damping Class D Circuit with discrete control circuitry (U.S. Patent #6,441,685). Differential-Balanced Input Topology: 1 pair of inputs. On-board Crossover: Fully-variable (40-200 Hz), selectable-slope (12 or 24 dB per octave) LP. Preamp Output: 2-channel (independent active filter, parallel with amp filter or pass through). Bass EQ: Single-band parametric with variable boost up to +15dB and Remote Bass Option. Infrasonic...

Tell a friend Klipsch THX Ultra II Certified Subwoofer Amplifier - KA-1000-THX Product code: KA-1000-THX The KA-1000-THX subwoofer amplifier is the powerful driving force behind the new Klipsch THX® Ultra2 system. This model offers rock-solid dependability under the most demanding conditions and allows listeners to experience all the power, detail and emotion of their favorite music and movies. Full product details Product awards View large image More images Delivery: FREE Delivery to UK Mainland...