trend jointers : 164 results priced between £25.00 and £150.00

Biscuit jointing machine with 0-90 degree tilt base for slotting grooves in boards and timbers to accept flat biscuit dowels. Six pre-set depth adjustment. Precise adjustable rise and fall with measurement scales. Supplied with six wing TCT blade, dust bag and storage case. ... more details...

Trend Biscuit Jointer Set 1/2 257132 (Tct Router Cutter Range / Biscuit Jointers) Enables biscuit jointing timber, man-made fibre and particle board with the router. The set includes three sizes of bearing offered for the three sizes of biscuits available. The correct choice of bearing for the biscuit being used, will ensure the correct depth of cut. A step washer is supplied for use with the bearings Refs. B15 and B23. A slightly longer cut than the length of the biscuit is required, to allow some...

Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.Teflon coated, indicated by distinctive black colouring.Can be used on hardwood & softwood, fibreboard, plywood and particle board....

Enables biscuit jointing timber, man-made fibre and particle board with the router.The set includes three sizes of bearing offered for the three sizes of biscuits available.The correct choice of bearing for the biscuit being used, will ensure...

Trend Biscuit Jointer Set 1/4 257131 (Tct Router Cutter Range / Biscuit Jointers) Enables biscuit jointing timber, man-made fibre and particle board with the router. The set includes three sizes of bearing offered for the three sizes of biscuits available. The correct choice of bearing for the biscuit being used, will ensure the correct depth of cut. A step washer is supplied for use with the bearings Refs. B15 and B23. A slightly longer cut than the length of the biscuit is required, to allow some...

Trend Biscuit Jointer Set 1/4 257131 (Tct Router Cutter Range / Biscuit Jointers) Enables biscuit jointing timber, man-made fibre and particle board with the router. The set includes three sizes of bearing offered for the three sizes of biscuits available. The correct choice of bearing for the biscuit being used, will ensure the correct depth of cut. A step washer is supplied for use with the bearings Refs. B15 and B23. A slightly longer cut than the length of the biscuit is required, to allow some...

Biscuit jointing machine with 0-90 degree tilt base for slotting grooves in boards and timbers to accept flat biscuit dowels.

shanks. 4mm kerf. Enables biscuit jointing with timber, man-made fibre and particle board. Features: Microgranular Carbide Tip; PTFE-Coated Body Minimises Resin Build-Up. Specifications: Shank size ". 4mm kerf. With 3 bearings suitable for biscuit sizes 0, 10 and 20.

Enables biscuit joints to be cut in hard & soft wood, processed timbers etc. A choice of bearings ensures correct depth is cut for size of biscuit

A universal classic style, can be used for moulding, panelling and when reversed, for a scribed joint or rule joint for a drop leaf table.

Quality products at competitive prices. Thousands of products in stock. Next day delivery free over £45. Same day despatch on orders before 3pm. Outstanding Customer Service. Secure online card processing. 30 day refund policy.

A slightly wider cut than the width of the biscuit is required to allow some lateral play for easy alignment during assembly.

Details For biscuit jointing of timber, man-made fibre and particle board with the router. The set includes three sizes of bearing which set the correct depth of cut for the three sizes available.A slightly longer cut than the length of the biscuit is required to allow some lateral play for easy alignment during assembly.A water based glue (PVA) is used with the biscuits which will expand as the moisture is absorbed.Boards are simply clamped together until glue is cured.For larger boards, biscuits...

Enables biscuit jointing with timber, man-made fibre 7 particle board. The correct choice of bearing will ensure the correct depth of cut for biscuit sizes No.0, 10 & 20.

One piece tool to increase glueing area for edge to edge joint.

Trend It/7210204 Lamello-Biscuit Jointer 100 Degrees FastFind Code: 2610660 Be the first to review this product Availability: In stock Delivery Time: 1 - 3 working days if ordered by 11:30am £104.35 Qty: Add to Basket OR Tweet " Double click on above image to view full picture More Views Product Description Trend Hard wearing steel body complete with disposable tungsten carbide knives and scorers. Suitable for producing grooves and slots in softwood, hardwood and man-made boards...

(to Mainland England, Wales and Southern & Eastern Scotland)

A universal classic style, can be used for moulding, panelling and when reversed, for a scribed joint or rule joint for a drop leaf table.

This Comb Jointing Set can be fitted to all heavy duty routers mounted in a fixed head position. It comprises a set of five 4mm kerf, TCT groovers, mounted on an arbor and three ball bearings. These offer alternative cutting depths and provide a self-guiding facility. The Trend Comb Jointer is ideally suited for producing small boxes, instrument cases etc. Please note. Timber ends must be cut square. Dimensions: D=47.6 mm B=28 mm Shank Diameter=1/2 inch Timber width Max. 40.0mm Shank Diameter...

Trend TR35 X 1/2 TCT Biscuit Jointer Set 4.0 x 37.2mm Enables biscuit jointing with timber, man-made fibre and particle board. The correct choice of bearing will ensure the correct depth of cut for biscuit sizes No. 0, 10 & 20. Dimensions: Shank: 1/2 in Cutting Diameter (D): 37.2mm Cutting Length (C): 4.0mm

Six pre-set depth adjustment. Precise adjustable rise and fall with measurement scales. Supplied with six wing TCT blade, dust bag and storage case. 110Volt ideal for site use. Minimum generator or transformer requirement 2.75 kVA continuous.

* Make sure that the cutter is centred on the workpiece. The cutter can also be used for a glue joint, for joining lengths together.

A slightly wider cut than the width of the biscuit is required to allow some lateral play for easy alignment during assembly.

A slightly wider cut than the width of the biscuit is required to allow some lateral play for easy alignment during assembly.

Product Information Trend C152 x 1/2 TCT Bearing Guided Biscuit Jointer 4.0 x 37.2mm TREC15212TC This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the three sizes of biscuits available. A slighlty longer cut than the length of the biscuit is required for ease of alignment during assemblySupplied with instructions.No. 0 - 45 mm x 15 mm x 4 mm Suitable for 8-12 mm boards Use bearing B19A 9.05 mm depthNo. 10 - 53 mm x 19 mm...

Trend C152X1/2TC Biscuit Jointer Cutter enables biscuit jointing with timber, man-made fibre and particle board, the correct choice of bearing will ensure the correct depth of cut for three sizes of biscuit, cutter diameter 37.2mm x cutter depth 4mm x 1/2" shank

* This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for buiscuit jointing. This set is supplied with three ball bearing guides to suit the three sizes of biscuits available.

Finger Jointer combines an assembley of five TCT slotting cutters with an abutting-edge cutter to produce a profile that extends the glue line threefold, resulting in an extremely strong joint.

A bearing guided reversible finger jointer, to increase the gluing area for edge to edge joints.

Enables biscuit jointing with timber, man-made fibre 7 particle board. The correct choice of bearing will ensure the correct depth of cut for biscuit sizes No.0, 10 & 20.

Enables biscuit jointing with timber, man-made fibre and particle board. The correct choice of bearing will ensure the correct depth of cut for biscuit sizes No. 0, 10 & 20.

Two wing self-guiding TCT slotting cutter is ideal for biscuit jointing. A slightly longer cut than the length of the biscuit is required for ease of alignment during assembly. Supplied complete with - 3 x ball bearing guides to suit the three sizes of biscuits NO- O/10/20

This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for biscuit jointing. The set is supplied with three ball bearing guides to suit the three sizes of biscuits available. A slightly longer cut than the length of the biscuit is required for ease of alignment during assembly. D=37.2 mm. Cut length=4 mm. B=12.7 mm. B2=16.0 mm. B3=19.0 mm. Shank Diameter=8mm. Instructions. COSHH.

This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for biscuit jointing. The set is supplied with three ball bearing guides to suit the three sizes of biscuits available. A slightly longer cut than the length of the biscuit is required for ease of alignment during assembly. D=37.2 mm. Cut length=4 mm. B=12.7 mm. B2=16.0 mm. B3=19.0 mm. Shank Diameter=12mm. COSHH.

A universal classic style, can be used for moulding, panelling and when reversed, for a scribed joint or rule joint for a drop leaf table. Dimensions: D=38 mm C=17 mm R=6 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Grade: TCT Diameter Metric: 38 Cut Length Metric: 17