welding consumable : 317 results priced between £2.00 and £100.00

Popular ENGWELD GOLD brand high quality anti-spatter spray. Used in all welding operations to prevent the build-up of spatter. Non-flammable and contains no CFC's or silicon....

NYLON LINER - 0.6-0.9mm 4 metre nylon liner for a 140 amp Binzel type MIG welding torch.

High Quality. Single Stage. Two Gauge. 30 Litre Per Minute (LPM). 3/8 BSP Male Outlet Fitting.

The Heavy Mig Contact Tip by Binzel. 1.2mm x M6. 25mm long. Longer lasting for greater welding performance. Binzel Part No 140.0256. 10 in a Pack.

SIFTrode 6013 is a versatile and general purpose rutile-coated mild steel MMA electrode which runs smoothly and leaves an attractive weld bead. CE approved to EN13479, SIFTrode 6013 can be confidently used on land-based steel structures and general fabrication alike.

FLUX - Aluminium flux. 500grm . For cleaning the parent face of the metal, thus allowing good adhesion, and improve the weld performance. Can be mixed with water to form a paste.

ELGA P 45S is a multi-purpose rutile-cellulosic coated electrode suitable for a wide application range in mild steel. The electrode is fully positional, including vertical down and welds witha crisp, steady arc to produce a smooth bead surface witha good slag detachability. It is relatively insensitive to rust, dirt and surface coatings. together with its ability to bridge gaps, the general versatility of P 45S makes it ideal for both shop and site fabrication.

Outer Nozzle retaining cap. 2 HOLE. Use only with Trafimet torch on plasma cutters with S25/35 prefix.

This British made precision engineered cutting attachment for the Gas-Arc lightweight shank, has a smooth progressive oxygen valve operation with a cutting capacity up to 20mm, 3/4".

MIXER - A Propane mixer for use with a type 4 combination blowpipe shank.

The two gauge regulators show both the cylinder contents and the regulated outlet pressure. The regulators are designed for use with the industry standard 5/8" bsp female cone recessed valves as used on BOC industrial gas cylinders.

The two gauge regulators show both the cylinder contents and the regulated output pressure. The regulators are designed for use with the industry standard 5/8" bsp female cone recessed valves as used on BOC industrial gas cylinders.

Suitable only for oxy/acetylene welding/brazing. Use to weld or braze materials up to 4mm, 3/16" thick

Suitable only for oxy/acetylene welding/brazing. Can be used to weld or braze materials up to 5.0mm, 3/16" thick

TYPE 3/4 WELDING NOZZLE NO 18 For use with a traditional shank and welding mixer. Suitable only for oxy/acetylene welding and brazing. Use to weld or braze materials up to 6.3mm, 1/4" thick.

Suitable only for oxy/acetylene welding/brazing. Can be used to weld or braze materials up to 1.2mm, 3/64" thick.

TYPE 3/4 WELDING NOZZLE NO 25. For use with a traditional shank and welding mixer. Suitable only for oxy/acetylene welding and brazing. Ideal for welding or brazing materials up to 8mm, 5/16" thick.

Suitable only for oxy/acetylene welding/brazing. Can be used to weld or braze materials up to 2.00mm, 5/64" thick

Suitable only for oxy/acetylene welding/brazing. Can be used to weld or braze materials up to 2.5mm,

Suitable only for oxy/acetylene welding/brazing. Can be used to weld or braze materials up to 3.2mm, 1/8" thick

The type 4 cutting attatchment has a cutting capacity of 1" (25mm) with a fine tune valve adjustment, and a 180° adjustment on nozzle direction.

CONTACT TIP - Contact tip 1.2mm x M10 for a Parweld XP8 mig torch.

CONTACT TIP - Contact tip 1.6mm x M10 for a PArweld XP8 mig torch..

Contact tip 250/360 Amp M6 1.0mm for a standard Binzel MIG welding torch.

CUTTING TIP - Cutting tip 1.0mm Trafim A60 for a plasma cutting machine.

For TIG welding of any ferrous or non ferrous metal with either DC or AC current.

COLLET BODY - Collet body 1.6mm 1/16" for a WP17/18/26 TIG welding torch.

300 Bar capability. Bottom entry design suited for top outlet cylinder valves. Fitted with 1/4"g parallel threaded gauges. Fitted with standard 3/8" BSP outlet. Fitted with 5/8" BSP inlet connections.

5 x 1.0mm TIG Torch collets. 5 x 1.6mm TIG Torch collets. 5 x 2.4mm TIG Torch collets. 5 x 1.0mm TIG Torch collet body. 5 x 1.6mm TIG Torch collet body. 5 x 2.4mm TIG Torch collet body. 5 x No.5 TIG Torch ceramic. 5 x No.6 TIG Torch ceramic. 5 x No.7 TIG Torch ceramic. 5 x 1.0mm Tungsten Electrodes for steel. 5 x 1.6mm Tungsten Electrodes for steel. 5 x 2.4mm Tungsten Electrodes for steel. 1 x Raaco® branded tough hinged carry case with removable drawers. SAVE OVER £20 COMPARED TO BUYING...

AGNM 19 - Acetylene gouging nozzle. Approx. groove dimension: 6-11mm. Ideal for groove cutting and gouging welds and defects. Can be used with a standard cutting torch or with a type3/4 shank and cutting attachment.

For use with a lightweight shank and cutting attachment. These nozzles will cut plate thicknessess from 20 - 50mm.

For use with a lightweight shank and cutting attachment. These nozzles will cut plate thicknessess from 6 - 20mm.

for Oxy Acetylene gas cutting. The ANM 3/64" is ideally used for cutting plate thicknesses between 6-20mm. 1/4"-3/4"