90 results for "mechanical filter" between £0 and £190
|
|
Mechanical filter. 2 sponges of different porosity for Bluwave filters
|
|
|
|
|
|
|
|
|
|
|
|
* Maximum flow-through 1100 litres/hour. * Max. pond volume 5000 litres (no fish) or fish ponds up to 2500 litres. * Integral 11 watt ultraviolet clarifier. * Internal connection for external. * Supplied with Free Box (of 5) arm length Pond Gloves.
|
|
|
|
The stainless steel sieve is 24.5cm wide, 40cm long, and has slots of 250 micron enabling the removal of the smallest particles. The sieve consists of hundreds of razor sharp stainless steel profile wires (safe to touch) with very small slot openings so water passes through but solids stay on the sieve, build up and roll to the bottom.
|
|
|
|
Zoo Med Mechanical Filter Sponge for Zoo Med's 501 External Filter Removes floating dirt and debris, improves water clarity, easy to clean/reusable.
|
|
|
|
|
|
|
|
2 sponges of different porosity for Bluwave filters for fresh and marine water
|
|
|
|
A coarse mechanical filter material which is to be used as bottom layer filtering. Its hollow ceramic design creates eddies which disburse the water into many paths. It traps large debris while creating an even flow of water for subsequent layers.
|
|
|
|
The Icom SP-21 speaker matches many Icom receivers and transceivers. It is 8 ohms and handles up to 3 watts. The SP-21 has a snap-out tilt bar to raise the front of the speaker if desired. Black metal construction 5.25 x 4.25 x 11 inches. A wired-in audio cable, terminating in a 1/8 inch mini plug is featured.
|
|
|
|
Generic service items are available under the "Choose by product > car care > service items" menu on the left hand side of this page.
|
|
|
|
Aquatic life generates a variety of wastes which can rapidly reach toxic levels. Tap water can also introduce undesirable elements. These wastes and bi-products must be removed. Water purification cannot occur without some type of filter material. The proper use of effective and specific media for particular tasks is vital in aquarium filtration. We separate these types into mechanical, biological, adsorptive and chemical filter media
|
|
|
|
Silverline 380056 63-88mm Oil filter wrench
Everybody who works on cars or vans needs an oil filter wrench that can get into those tight engine bay spots and really gets to grip on even the dirtiest of filters. This wrench doesn’t slip and will keep your knuckles intact and get the job done.
|
|
|
|
> SONY DSP Image sensor > High Resolution 480TVL/520TVL (Y/C) > Auto Switch Colour / Mono Image > Mechanical IF filter > AGC, BLC & FL control > Dual Voltage or AC (with Line Lock) Specification Pick Up Element 1/3" Sony Super HAD CCD Number Of Total Pixels NTSC 811(H) x 508 (V)PAL: 795(H) x 596 (V) Resolution 480TV Line / 520TV Line (Y/C Output) Minimum Illumination 0.15Lux /F1.2 ; 0Lux/F1.2 with IR light Auto Iris Video / DC Auto Iris Output B.L.C. ON / OFF Switch Auto...
|
|
|
|
Be the among the first to use one of a fantastic range of new welding masks brought to you by 3M Speedglas™ featuring the new MECHANICAL SKULL desig... (more)
|
|
|
|
|
|
|
|
|
|
|
|
AOR Optional internal Collins 2.5mHz mechanical SSB filter
The Icom SP-21 speaker matches many Icom receivers and transceivers. It is 8 ohms and handles up to 3 watts. The SP-21 has a snap-out tilt bar to raise the front of the speaker if desired. Black metal construction 5.25 x 4.25 x 11 inches. A wired-in audio cable, terminating in a 1/8 inch mini plug is featured.
|
|
|
|
mechanical filter: 2 sponges of different porosity for Bluwave filters
|
|
|
|
One piece forged alloy tool, steel handle and jaw. Features double jaw
|
|
|
|
|
The Icom SP-21 speaker matches many Icom receivers and transceivers. It is 8 ohms and handles up to 3 watts. The SP-21 has a snap-out tilt bar to raise the front of the speaker if desired. Black metal construction 5.25 x 4.25 x 11 inches. A wired-in audio cable, terminating in a 1/8 inch mini plug is featured.
|
|
|
|
Silverline 380671 57-65mm Oil filter wrench
Everybody who works on cars or vans needs an oil filter wrench that can get into those tight engine bay spots and really gets to grip on even the dirtiest of filters. This wrench doesn’t slip and will keep your knuckles intact and get the job done.
|
|
|
|
Fuel Filter in Tank
On the Front of the Fuel Rail, For 944 8 valve Models upto 1989 & All Turbo Models 1986 to 1992 , Not for 2.7 Models
|
|
|
|
Original equipment supplier. Mahle Knecht. For 993 Models
|
|
|
|
Original equipment supplier. Mahle Knecht. For 993 Models
|
|
|
(UK)
