This versatile cloth is thick enough to remove even the thickest grease and grime from all hard surfaces.
E-cloth Kitchen / Bathroom Pack
HG powerful garden furniture cleaner porcelain cleanerly and easily removes stubborn dirt from all plastic garden furniture. The cleaner is also ideal for use on epoxy, galvanised and aluminium surfaces. Spray the surface and allow 1 to 2 minutes for the cleaner to work. Remove the dirt with a cloth or kitchen paper. If the surface is very dirty, allow longer for the cleaner to work. Then clean off the dirt with a brush or sponge and rinse off. 75ml.
Cda Ka42ss Stainless Steel One And A Half Bowl Sink - Stainless Steel Stainless Steel Sinks| Kitchen Sinks From Fitmykitchen.Co.Uk
UPVC powerful cleaner is a very special cleaner to easily and quickly remove any form of dirt from all types of synthetic materials
Ducted or recirculating extraction. 3 speeds. Twin fan motor. Slider control. Acrylic grease filter. 2 x 40W light. Glass diffusers.
Cda Ka62ss Stainless Steel One And A Half Bowl Sink - Stainless Steel Stainless Steel Sinks| Kitchen Sinks From Fitmykitchen.Co.Uk
The Mop will give a perfect clean to all hard floors, with just water – including laminate, vinyl, stone, tiles and wood. The Deep Clean Head will leave floors completely clean, without the need for liquid cleaners or chemicals. The weave and long fibres of the Deep Clean Head are designed to break up and hold thick grease and dirt, which ordinary mops leave behind.The fibres absorb water fast and effectively. Telescopic Handle (extendable 1 - 1.8m). 45 x 13.5cm Base with Velcro strips. 1 Deep...
Restore the appearance of lightly weathered or severely soiled garden furniture using HG plastic garden furniture restorer. Begin the treatment by removing all the loose dirt. To do this, HG powerful garden furniture cleaner is recommended. Then wait for the garden furniture to dry. Apply HG plastic garden furniture restorer with a cloth and rub in lightly. The product has a light polishing effect, so it should be applied in one direction only. Then polish with a soft clean cloth to a clean...
The Lausanne Range ROK sinks offers sleek continential styling and contemporary design. All models feature Aquature drainer waste combined with a fully recessed drainer area that allows liguids to drain quickly away even when the other bowls are in use.™™™. Inset Design. Overall size: 1000 x 500 mm. Bowl size: 480 x 430 x 230 mm. Minium Base Unit: 600mm.
Accessory pack: stainless steel main bowl basket and colander, wooden chopping board
FREE SINGLE LEVER TAP included. Deep recessed drainer. Fits in 600mm base unit. Reversible. Polished finish. Size: 985 x 508mm.
Cda Kl41ss Stainless Steel Large Single Bowl Sink - Stainless Steel Stainless Steel Sinks| Kitchen Sinks From Fitmykitchen.Co.Uk
Single flow. 360° spout rotation. Minimum pressure 0.5 bar.
Required height over gas hob: 750mm. Required height ovr electric hob: 650mm. Noise level: 54dBA. Extraction rate: 370m3/hr. Pressure value: 340Pa. Rated electrical power: 190W. Power supply required: 3 amps.
Inset design. Asterite construction. Sctratch and chip resistant. Fits 500mm base unit. Reversible.
Spray HG headstone cleaning spray from 5 cm on the surface to be cleaned and leave for 25 minutes
Fits in 500mm base unit. Reversible. Polished finish. Size: 1000 x 500 x 150mm.
Inset Design. Stainless steel 0.8mm (18/10 quality). Polished finishing Inset installation. 3.5" strainer wastes. Fits 800mm minimum unit. Size:860 x 500mm. Bowl Size: 360 x 420 x 180mm.
Single flow. 360° spout rotation. Minimum pressure 0.5 bar.
Classic design. Heavy duty. Scratch, stain and heat resistant. Fits in 1000mm base unit. Available with left or right hand drainer.
Contemporary design. Fits in 1000mm base unit. Available in left or right hand drainer. Polished finish. Flat edge design.
Cda Vsk1 Stainless Steel Designer Single Bowl Sink - Stainless Steel Stainless Steel Sinks| Kitchen Sinks From Fitmykitchen.Co.Uk
Cda Kr21 Stainless Steel Single Round Bowl Sink Stainless Steel Sinks| Kitchen Sinks From Fitmykitchen.Co.Uk
Required height over gas hob: 750mm. Required height ovr electric hob: 650mm. Noise level: 54dBA. Extraction rate: 390m3/hr. Pressure value: 390Pa. Rated electrical power: 150W. Power supply required: 3 amps.
Cda Ka22 Stainless Steel One And A Half Bowl Sink Stainless Steel Sinks| Kitchen Sinks From Fitmykitchen.Co.Uk
Overall size: 450 x 30mm. Bowl size: 385 x 30mm. Polished stainless steel finish.
Inset design. Overall size: 620 x 500mm. Bowl size: 340 x 400 x 150mm. Polished stainless steel finish. Reversible drainer with tap hole. Yes it will just fit a 400mm unit.
Overall size: 76.5 x 48. Bowl size: 38.5 x 15. Single bowl. 3.5" strainer wastes. 18/10 stainless steel. Strengthened construction. Polished stainless steel finish. Fits 450mm base cabinet. Tap hole not shown. Reversible drainer.
Inset Design. Overall size: 1000 x 50mm. Bowl size: 340 x 400 x 15mm / 160 x 300 x 90mm. Polished stainless steel finish. Reversible Drainer. Fits 600mm minium Unit.
Overall size: 860 x 500mm. Bowl size: 340 x 400 x 150mm. Polished stainless steel finish. Reversible. Minium Base Unit 500mm. Tap hole note shown in photo.
Inset Square Cut Design. Fits Minium Base: 400mm. 1mm heavy guage stainless steel. Bowl depth: 216. Size: 1000 x 500mm. 90mm waste outlet to take Waste disposer. Strainer wastes supplied.
Inset Design. 18/10 Polished Stainless Steel. 3.5" Strainer Wastes. Fits 800mm Cabinet. Size: 1190x 480mm. Bowl Size: 340 x 480 x 170mm.
Inset Design. Overall size: 450 x 150mm. Bowl size: 385 x 150mm. Polished stainless steel finish. Minium Base unit: 450mm.
Inset design. Heavy duty. Scratch, stain and heat resistant. Fits in 800mm base unit. Reversible. Size: 1000 x 525mm. Bowl size 495 x depth 200mm. Dimensions may vary +/- 2%. 3.5" Strainer wastes. Suitable for a waste disposer with extended mounting flange.
Inset Design. 18/10 Polished Stainless Steel. 3.5" Strainer Wastes. Fits 800mm Cabinet. Size: 1190x 480mm. Bowl Size: 340 x 480 x 170mm.
Cda Ksc13ss Stainless Steel Undermount Designer Square Cut Single Bowl - Stainless Steel Undermounts Sinks | Kitchen Sinks From Fitmykitchen.Co.Uk
Overall size: 960 x 480mm. Bowl size: 500 x 400 x 200mm. Polished stainless steel finish. Tap holes 1 (Not Shown). Reversible Drainer model only. Fits: Minium Base unit 600mm.
Put a little HG Deep Cleaner for Leather on a clean, soft cloth. Clean the leather with circular movements without exerting pressure. Allow 10 to 30 seconds for the product to work and then remove the dirt which comes off. Now allow the leather to dry for 30 minutes. For optimum protection it is advisable to treat the leather with HG 4 in 1 for Leather.
Vertically fitted. Non-drip, one shot action. Capacity 800 ml. Key lockable. Bulk fill. For wall mounting, fixing screws included. Grade 304 stainless steel.
Classic design. Heavy duty. Scratch, stain and heat resistant. Fits in 1000mm base unit. Available with left or right hand drainer.
230V for mains use. Light with switch, tube and diffuser. 3 lengths available. Supplied with 2000 mm bare ended mains lead. White plastic. For use in areas where the surrounding temperature is 15-25 ºC. With cool white tube.
HG chandelier spray cleaner is a fast-working manual spray cleaner that is safely and effectively. The cleaner removes dirt and grime completely. Regular use prevents a severe build up of dirt. HG chandelier spray cleaner dries porcelain cleanerly to a gleaming finish. Cover the floor or furniture underneath well with plastic sheeting. Lay sheets or towels directly under the chandelier. Spray particurlarly well on difficult to reach areas between for example the crystal and armatures so that...
Basin manufactured from 1.2mm 304 (1.4301) stainless steel. 25mm chamfered rim. Overflow is fitted to this model. Waste plug and chain are included. M4 40mm fixing studs and fixings.
Made with solid beech frame and stainless steel base, supplied with pre -drilled runners, these modern baskets are the ideal storage solution for fruit and vegetables. Available in 2 widths, the baskets are designed to fit into carcasses constructed from 18/19mm board. Suitable for both contemporary or traditional style kitchens, the modern baskets can be concealed behind a hinged door, or alternatively placed in an open unit to create a feature piece.
Cda Ka21 Stainless Steel Single Bowl Sink Stainless Steel Sinks| Kitchen Sinks From Fitmykitchen.Co.Uk
HG Mould Spray effectively removes all black and brown stains caused by mould, fungus, moss and algae inside and outside. HG Mould Spray bleaches grey and black mould spots and green algae spots. For cleaning tiled walls, (also suitable for marble) and grouting in the bathroom, toilet, kitchen, cellar, basement, sauna, garage, shed etc. It also cleans facades, balconies, plant boxes and garden ornaments. Effective mould killer. 500ml of Mouldspray is suitable for 2-3 square metres of wall surfaces...
Required height over gas hob: 750mm. Required height ovr electric hob: 650mm. Noise level: 54dBA. Extraction rate: 390m3/hr. Pressure value: 390Pa. Rated electrical power: 150W. Power supply required: 3 amps.
Etrouno 170U Stainless Steel Undermount Sink Undermounts Sinks | Kitchen Sinks From Fitmykitchen.Co.Uk
Classic design. Heavy duty. Scratch, stain and heat resistant. Fits in 1000mm base unit. Available with left or right hand drainer.
Inset Design. Overall size: 450 x 150mm. Bowl size: 385 x 150mm. Polished stainless steel finish. Minium Base unit: 450mm.
Iris bowls are a new stylish proposition from PYRAMIS for under mount installation. The Iris series offers you multiple bowl configurations, quite impossible within a conventional sink format, of different sizes and shapes that can be installed under granite, solid surface or wooden work tops, to suit your own requirements.
Overall size: 90 x 48. Bowl size: 38.5 x 15. Polished stainless steel finish. Reversible Drainer not handed. Tap hole not shown.
Overall size: 940 x 490mm. Bowl size: 400 x 340 x 150mm. Polished stainless steel finish. Fits Minium 500mm Unit. Two Tap holes.
Standard Single Lever Tap - Chrome. Single flow. 360° spout rotation. Minimum pressure 0.5 bar. Single flow. 360° spout rotation. Minimum pressure 0.5 bar.
Undermount or Insert design. 1mm 18/10 Stainless Steel. 90mm strainer wastes. Sizes: 600 x 450 x 200mm. Cut Out Size: 550 x 400mm. Minium Base Unit: 500mm.
Undermount or Insert design. 1mm 18/10 Stainless Steel. 90mm strainer wastes. Sizes: 500 x 450 x 140mm. Cut out Size: 450 x 400mm. Minium Base Unit: 500mm.
Undermount or Insert design. 1mm 18/10 Stainless Steel. 90mm strainer wastes. Sizes: 400 x 450 x 200mm. Cut out Size: 350 x 400mm. Minium Base Unit: 400mm.
Undermount or Insert design. 1mm 18/10 Stainless Steel. 90mm strainer wastes. Sizes: 500 x 450 x 25mm. Cut out Size: 450 x 400mm. Minium Base Unit: 500mm.
Undermount or Insert design. 1mm 18/10 Stainless Steel. 90mm strainer wastes. Sizes: 400 x 450 x 200mm. Cut out Size: 350 x 400mm. Minium Base Unit: 400mm.
Undermount or Insert design. 1mm 18/10 Stainless Steel. 90mm strainer wastes. Sizes: 600 x 450 x 200mm. Cut Out Size: 550 x 400mm. Minium Base Unit: 500mm.
Undermount or Insert design. 1mm 18/10 Stainless Steel. 90mm strainer wastes. Sizes: 500 x 450 x 140mm. Cut out Size: 450 x 400mm. Minium Base Unit: 500mm.
Undermount or Insert design. 1mm 18/10 Stainless Steel. 90mm strainer wastes. Sizes: 250 x 450 x 140mm. Minium Base Unit: 300mm.
£60.00 Outside Uk Mainlaind Postage Outside Uk Mainland Postage & Delivery Charges| From Fitmykitchen.Co.Uk
Undermout design. Chrome strainer wastes. 3 colours:. Matt: Soapstone. 2 Metallic colours:. Granite, Titanium. Size: 502 x 387mm. Bowl sizes: 449 x 325 x 168mm. Cut out Size: 449 x 325mm. Minium base unit: 500mm.
Undermout design. Chrome strainer wastes. 3 colours:. Matt: Soapstone. 2 Metallic colours:. Granite, Titanium. Size: 215 x 387mm. Bowl sizes: 162 x 325 x 128mm. Cut out Size: 162 x 325mm. Minium base unit: 300mm.
£60.00 Outside Uk Mainlaind Postage Outside Uk Mainland Postage & Delivery Charges| From Fitmykitchen.Co.Uk
Inset Design Or Undermount. Stainless steel 0.9mm (18/10 quality). Polished finishing Inset installation. 3.5" strainer wastes. Fits 500mm minimum unit. Complies with HTM64 01-05 specification for sinks without overflows, health technical specification. Use with Space Saver remote running trap below. Size: 440 x 380mm. Bowl Size: 400 x 340 x 160mm.
Undermout design. Chrome strainer wastes. 3 colours:. Matt: Soapstone. 2 Metallic colours:. Granite, Titanium. Size: 378 x 378mm. Bowl sizes: 325 x 325 x 128mm. Cut out Size: 325 x 325mm. Minium base unit: 450mm.
Neat right angles and clarity of form define Tetragon’s desirable and elegant design. A wide range of different sizes are available for undermount installation. Overall size: 490 x 440mm. Bowl size: 450 x 400 x 200mm. Waste size: 3.5" strainer wastes. Brushed stainless steel finish.
Neat right angles and clarity of form define Tetragon’s desirable and elegant design. A wide range of different sizes are available for undermount installation. Overall size: 440 x 440mm. Bowl size: 400 x 400 x 200mm. Waste size: 3.5" strainer wastes. Brushed stainless steel finish.
Curved and straight lines matched perfectly together with interesting combinations of large scale bowls of various dimensions, making the Ariadne series one of the most attractive PYRAMIS propositions for inset sinks .
£90.00 Outside Uk Mainlaind Postage Outside Uk Mainland Postage & Delivery Charges| From Fitmykitchen.Co.Uk
Inset Square Cut Design. Fits Minium Base: 400mm. 1mm heavy guage stainless steel. Bowl depth: 216. Size: 1000 x 500mm. 90mm waste outlet to take Waste disposer. Strainer wastes supplied.
£10.00 Outside Uk Mainlaind Postage Outside Uk Mainland Postage & Delivery Charges| From Fitmykitchen.Co.Uk
Overall size: 860 x 435mm. Bowl size: 365 x 335 x 150mm. Polished stainless steel finish. Fits minium base unit: 500mm. Tap holes not shown in photo, see diagram.
Inset Design. Overall size: 1000 x 50mm. Bowl size: 340 x 400 x 15mm. Polished stainless steel finish. Reversible Drainer. Fits 500mm minium Unit.
A model that can effectively meet the demanding needs of a busy kitchen. With its generous sized bowl and its practical accessories, Titan can become the absolute work top of all cleaning and food preparation activities.
Inset Design. Overall size: 1000 x 50mm. Bowl size: 340 x 400 x 15mm. Polished stainless steel finish. Reversible Drainer. Fits 500mm minium Unit.
One tap hole. Offset bowl. Basin manufactured from 1.2mm 304 (1.4301) stainless steel. Chamfered rim. Overflow is fitted to this model. Waste plug and chain are included. M4 40mm stainless steel fixing studs and fixings. ».
Buy this pack and get CDA WC130 Fully Integrated Dishwasher for
Inset Design. Overall size: 1000 x 50mm. Bowl size: 340 x 400 x 15mm / 160 x 300 x 90mm. Polished stainless steel finish. Reversible Drainer. Fits 600mm minium Unit.
Inset Design. Overall size: 1000 x 50mm. Bowl size: 340 x 400 x 15mm. Polished stainless steel finish. Reversible Drainer. Fits 500mm minium Unit.
Basin manufactured from 1.2mm 304 (1.4301) stainless steel. 25mm chamfered rim. No Overflow fitted to this model. Waste plug and chain are included. M4 40mm fixing studs and fixings.
Sinks must not only optimize space, but also be stylish and functional; this is the basic idea of the Amaltia series. Amaltia is a fully completed series resulted in its different configurations of deep bowls and well designed drainers.
Iris bowls are a new stylish proposition from PYRAMIS for under mount installation. The Iris series offers you multiple bowl configurations, quite impossible within a conventional sink format, of different sizes and shapes that can be installed under granite, solid surface or wooden work tops, to suit your own requirements.
Inset Design. Overall size: 1000 x 50mm. Bowl size: 340 x 400 x 15mm / 160 x 300 x 90mm. Polished stainless steel finish. Reversible Drainer. Fits 600mm minium Unit.
£15.00 Outside Uk Mainlaind Postage Outside Uk Mainland Postage & Delivery Charges| From Fitmykitchen.Co.Uk
A range of luxury undermounted sinks, fabricated with 18/10 stainless steel with a satin 18 gauge finish. The shaped bowls are big and deep to accomodate the largest of pots & pans. The bowls have a soft satin finish for durability, while the top reveal of the sink rim has a bright mirror finish that accents the shape of the sink for a stunning effect. Can be used in conjunction with waste disposal units, subject to suitable work surfaces. Each sink comes complete with 89mm basket wastes, an installation...
Iris bowls are a new stylish proposition from PYRAMIS for under mount installation. The Iris series offers you multiple bowl configurations, quite impossible within a conventional sink format, of different sizes and shapes that can be installed under granite, solid surface or wooden work tops, to suit your own requirements.
Inset Design. One Tap hole not shown in image. Stainless steel 0.8mm (18/10 quality). Polished finishing Inset installation. 3.5" strainer wastes. Fits 800mm minimum unit. Complies with HTM64 01-05 specification for sinks without overflows, health technical specification. Use with Space Saver remote running trap below. Size:860 x 500mm. Bowl Size: 360 x 420 x 180mm.
Inset Design. Overall size: 1000 x 50mm. Bowl size: 340 x 400 x 15mm / 160 x 300 x 90mm. Polished stainless steel finish. Reversible Drainer. Fits 600mm minium Unit.
Neat right angles and clarity of form define Tetragon’s desirable and elegant design. A wide range of different sizes are available for undermount installation. Overall size: 490 x 440mm. Bowl size: 450 x 400 x 200mm. Waste size: 3.5" strainer wastes. Brushed stainless steel finish.
Neat right angles and clarity of form define Tetragon’s desirable and elegant design. A wide range of different sizes are available for undermount installation. Overall size: 440 x 440mm. Bowl size: 400 x 400 x 200mm. Waste size: 3.5" strainer wastes. Brushed stainless steel finish.
Inset Design. Reversible Drainer. Stainless steel (18/10 quality) 0.7mm. Polished finishing Inset installation. 90mm strainer wastes. Tap holes not shown in photo. Fits 450 mm minimum unit. Size: 860 x 500mm. Bowl Size: 360 x 420 x 160mm.
Inset Design. Overall size: 1000 x 50mm. Bowl size: 340 x 400 x 15mm / 160 x 300 x 90mm. Polished stainless steel finish. Reversible Drainer. Fits 600mm minium Unit.
Offset bowl. Basin manufactured from 1.5mm 304 (1.4301) stainless steel. Chamfered rim. Overflow is fitted to this model. Waste plug and chain are included. M4 40mm stainless steel fixing studs and fixings.
