angliatoolcentre.co.uk

Is this your shop? Control your presence on Shopwiki by opening a free account on Merchant Fusion!
Sample Offers
Increased flexibility -With universal applicationFor universal use in wood, chipboard, mdf, plastic and even thin metal sheet.4CUT point:No pre-drilling, no splitting.Square end divides fibres,Patented ground serrationsGive immediate grip.
Featuring Two unique patented slots, allows screwing close to the edge without splitting. Under the head are ribs & tucks enabling the screw to sit flush & tight to the surface.
Featuring Two unique patented slots, allows screwing close to the edge without splitting. Under the head are ribs & tucks enabling the screw to sit flush & tight
Featuring Two unique patented slots, allows screwing close to the edge without splitting. Under the head are ribs & tucks enabling the screw to sit flush & tight
Featuring Two unique patented slots, allows screwing close to the edge without splitting. Under the head are ribs & tucks enabling the screw to sit flush & tight to the surface.
Featuring Two unique patented slots, allows screwing close to the edge without splitting. Under the head are ribs & tucks enabling the screw to sit flush & tight
REISSER R2 CUTTER WOODSCREWS&nbsp5 x 70mm CSK TUB OF 450 High performance all purpose selfcountersinking screw for fast accurate driving into softwood chipboard and most hardwood 2 patented slots to prevent splitting close to edge Ribs &amp tucks to enable flush fitting without surface damage Waxed thread Zinc and Yellow Passivated for up to 20x more rust resistance than standard BZP screws
ESCP protects machine and battery when working and charging. The technology incorporates overload shut-off, overheat monitoring and shut off and battery cooling whilst charging. This technology gives you greater peace of mind through increased reliability and service life.
The HSS drill bits are gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. The hex collar, is supplied in the sets to enable drills to be removed with two spanners.
A two-part aluminium hinge jig portable template set designed for recessing hinges in wooden doors & frames. It is easy to use with minimal setting-up time, completing the job both accurately & quickly. Used on-site & in joinery shops to increase productivity with excellent results. Four apertures for fire door requirements. No need for marking out in the conventional way. Quick & simple to set-up as the hinge is used as the pattern. Clean & accurate recesses are achieved every time. Suitable for...
Increased flexibility -With universal applicationFor universal use in wood, chipboard, mdf, plastic and even thin metal sheet.4CUT point:No pre-drilling, no splitting.Square end divides fibres,Patented ground serrations Give immediate grip.
Featuring Two unique patented slots, allows screwing close to the edge without splitting. Under the head are ribs & tucks enabling the screw to sit flush & tigh
The EY7940LZ2S is a truly multi talented new addition. It offers precise percussion drilling (up to 25.200 Beats per minute) into masonry, bricks or tiles. In Drill Driver Mode it still achieves torque of 31.9Nm, so has same application range as EY7441LZ2S. It is Equipped with 3.1Ah (3.3Ah Typical ) Li Ion battery to reach extraordinary endurance. The built-in Overheat Protection System (OPS) reduces the likelihood of any motor burn out by ensuring that when the tool is overloaded the motor is automatically...
The Makita BMR102 is the replacement for the popular BMR100 radio. The BMR102 has several advantages over its predecessor including the ability to accept 7.2 and 10.8v li-ion batteries. It also has distinctive elastomer bumpers and silver coloured front control panel. The Silver Front control panel and newly designed Elastomer bumpers for visual distinction from its predecessor the BMR100.
BX10 Superfast Dry Diamond Core Kit contains everything you need to get going with dry core drilling in a sturdy, aluminium case. Revolutionary BX10 SUPERFAST dry core and HEX and SDS accessories. Universal dry core for faster, cleaner cutting in most building materials including semi-engineering bricks, clay products, and limestone aggregate concrete. Applications include: all bricks, concrete blocks, general building materials, lightly reinforced limestone aggregate concrete, most natural stone...
The DeWalt DEWDCG412M2 is an 18 volt XR Li-Ion premium Angle Grinder, featuring XR 4.0Ah Li-Ion battery technology. Part of the intelligent XR Lithium Ion Series, it is designed for efficiency and making applications faster. The grinder has a powerful and highly efficient PM58 DEWALT fan cooled motor with replaceable brushes, which delivers up to 7,000 rotations per minute for fast cutting and grinding applications.
- With elastic pockets to hold Snappy shanks. Supplied with a snappy pencil. Tool holders have a belt strap and are Velcro fastening.
Featuring Two unique patented slots, allows screwing close to the edge without splitting. Under the head are ribs & tucks enabling the screw to sit flush & tight
Bosch Premium Heavy Duty Impact Driver supplied with 2 x 4.0ah "Cool Pack" Lithium-ion Batteries & Charger. Supplied in L-BOXX
The Makita BJV180 Cordless Jigsaw features Tool -less blade change, LED job light that creates an easy to trace cutting line and smooth and powerful cutting at the high stroke speed of 2,600spm. Ergonomic 2-Finger Variable Speed Trigger Switch Large trigger thats easy-to-operate even with gloved hand. Dust extraction nozzle attachment tube for base plate. Dust Blower to clear cut line of dust and swarf build up
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Specifications D 1/2 inch D 12.7 mm C 25 mm OL 68 mm Shank Diameter 1/2 inch
Featuring Two unique patented slots, allows screwing close to the edge without splitting. Under the head are ribs & tucks enabling the screw to sit flush & tight
Bosch mitre saw twin pack includes 1 x 80 tooth and 1 x 48 tooth.
The low-cost diamond cutting disc that is a problem solver in all building materials
The Hinge Jig is a portable template set designed for recessing hinges in wooden doors & frames. It is easy to use with minimal setting-up time, completing the job both accurately & quickly. Used on-site & in joinery shops to increase productivity with excellent results. Four apertures for fire door requirements. No need for marking out in the conventional way. Quick & simple to set-up as the hinge is used as the pattern. Clean & accurate recesses are achieved every time. Suitable for timber based...
Automatic shut-off protects excessive discharge of the vehicles battery. Diagnostics with LED inidcator communicates battery charge status: Charged, Charging, Power line problem, Replace pack, Battery too hot or too cold. Intelligent Charger varies charge rate according to battery type to increase battery pack life
Featuring Two unique patented slots, allows screwing close to the edge without splitting. Under the head are ribs & tucks enabling the screw to sit flush & tight
The LADDER38 telescopic ladder is a great idea. The ladder has an adjustable telescopic extending action so that you can use it to whatever height you like up to a max of 3.8 metres (Fully extended).
Makita DLX2005M 18V Combi Hammer Drill & Impact Driver Twin Pack2 X 4.0ah Li-ion Batteries The Makita DLX2005M kit is the replacement model for the best selling LXT202 / DK18000 kit. This updated model features a faster combi drill with higher torque and an impact driver which also has higher torque.The Makita DLX2005M replaces the most popluar LXT Lithium LXT202 / DK18000 Twin Pack with the new and improved BHP458 Combi Hammer Drill which replaces the BHP451. This kit also features the BTD146 Impact...
Latest generation 18V XR Li-Ion XRP hammer drill driver featuring XR 4.0Ah Li-Ion battery technology. With a tough 3 speed all metal transmission for increased runtime and longer tool life. Electronic Clutch with 11 position adjustable torque control for optimized precision when screw driving. 13 mm ratcheting keyless chuck with automatic spindle lock for fast bit changes. Efficient intelligent trigger allowing total control over all applications. Foot LED with delay feature for improved visibility...
PRT Trend Professional Portable Router Table 230v a real professional portable router table with aluminium table surface and back fence for floor&bench mounting use fitted with back fence squareness adjustment for absolute accuracy&T11E quick release fixing holes for fixing the T11 fixing kit, complete with bench leg level adjustment when mounted on a bench and 20mm hole for the T11 Quick Raiser adjuster handle can be floor or bench standing with removeable legs with adjustment for uneven floors...
The NEW mitre saw has much improved dust management and a greater horizontal and vertical cutting capacity of its predecessor
- Left hand and right hand corners, 400mm radius peninsular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps.
Voltage : 14.4 Volt. Battery Capacity : 3.0Ah. Oscillations : 11 000 - 18 000 R.P.M. Amplitude : 2 x 1.6Grad. Weight : 1,7 kg. Chuck : QuickIN.
The Makita BMR102 is the replacement for the popular BMR100 radio. The BMR102 has several advantages over its predecessor including the ability to accept 7.2 and 10.8v li-ion batteries. It also has distinctive elastomer bumpers and silver coloured front control panel. The Silver Front control panel and newly designed Elastomer bumpers for visual distinction from its predecessor the BMR100.
TREND TRECASE 1001 CARRY CASE FOR KWJ900 WORKTOP JIG
The Makita DLX2005 kit is the replacement model for the best selling DK18000 kit. This updated model features a faster combi drill with higher torque and an impact driver which also has higher torque.
Makita heated jacket which utilses Makita 18v Lithium-ion batteries. The jackets have 3 x heat settings and have 3 heated zones to keep you warm.
- Flexible attachment using clamps or adhesive strip to prevent tool from slipping
Folds for easy storage. Steel frame construction. Dual clamping cranks. Adjustable swivel pegs. Anti slip rubber feet. Vice jaw length: 610mm. Vice jaw opening: 0 - 115mm. Vice jaw material: Compressed Bamboo. Working height: 760mm. Table width: 341mm. Maximum load: 160Kg. Net Weight: 6.600kg.
REDLITHIUM-ION™ battery pack delivers up to 2x more run time, up to 20% more power, up to 2x more battery life and operates better down to -20°C than other lithium-ion technologies
Black leather water resistant flexi hiker, Steel toe cap and composite mid-sole, Padded collar and tongue, EVA rubber sole unit, Chemical resistant sole, Oil resistant sole, Shock absorption sole, Anti Static. This boot is made to CE EN345-1:1993 S3 Standard.
Makita Type 2 connecting and stacking case usefull for string tools and accessories.
Power Grab n Bond is a revolutionary product in the field of heavy duty versatile bonding. It’s formulation is based on our unique hybrid polymer product CT1. The density of Power Grab n Bond is far greater allowing phenomenal results in initial grab. Coupled with the rapid curing will in the majority of applications reduce labour time by at least 50%. With Power Grab n Bond there is absolutely no need for any additional fixings as it was initially developed for facade bonding. In addition Power...
Irwin IRW10508167 Lock-n-Load Quick Change Extension Bit Holder 150mm 1/4 Inch
Energy production is more efficient than brushed DC motor because of no friction loss caused by brushes, enabling lower amperage for reduced heat production and increased work amount on a single full battery charge
Milwaukee's high performance 4 pole motor delivers maximum power whilst optimising the power to weight ratio. Hammer action of 28,000 BPM for highly effective masonry drilling. Milwaukee patented electronics in both power tool and battery pack deliver revolutionary durability. Heavy Duty 13mm full metal chuck delivers optimum bit retention, 3 stage mode selector allows the user to switch between 'Drill', 'screw drive' and 'percussion drilling' modes quickly and easily. Full metal gear box delivers...
Powerful 10.8v Drill Driver supplied with1 x 2.0ah, 1 x 4.0ah Li-ion batteries and charger. Backer up by the Metabo 3 year warranty.
The DeWalt DCF889N is an 18 volt XR Li-Ion High Torque Wrench, featuring NEW XR Li-Ion battery technology. It has a powerful fan cooled motor, which delivers up to 418 Nm of sustained torque and up to 2,300 impacts per minute for heavy-duty fastening applications. The 1/2 inch (13 mm) square drive allows for more efficient torque delivery and excellent socket retention, whilst the bright white LED with delay feature improves visibility and provides flashlight functionality. The aluminium front housing...
Fuel & Battery Gauge - Easy and fast control of your battery and fuel cell levels means you need never be caught without power on site as the tool alerts you when down to your last 300 shots.
Charger for 14.4 to 18v Lithium-ion Batteries. Communicates with battery to compare its history and life cycle. Li-ion batteries can also be charged at any point full or empty.
Featuring Two unique patented slots, allows screwing close to the edge without splitting. Under the head are ribs & tucks enabling the screw to sit flush & tight
Bosch Industrial 9 Piece Holesaw Set. Includes all the common sizes for Electricians applications
REDLITHIUM-ION TM battery pack delivers up to 2x more run-time, up to 20% more power, up to 2x more battery life and operates better down to -18C° than other lithium-ion technologies
Heat treated tool steel countersink with a HSS drill. Adjustable for different length screws and can produce a 9.5mm (3/8 inch) diameter counterbored hole for woodplugs. The drill produce pilot holes only.
For fast and accurate joining of timber and plywood giving strong instant joints. Solid hardened bushes with variable pitch of 29mm to 63mm. Use on timber, MDF, plywood and blockboard. Allows a variety of joints to be created individually. Uses square drive self tapping screws. Workpiece can be handled immediately after gluing & screwing creating time saving benefits. No clamps required.
A wood boring bit offering 6 x faster penetration than a standard flat bit. Each bit has been fully heat treated for extra durability. The Tri-flute tapered flute design gives faster chip ejection and less binding during use. Full screw tip - for ease of use and pull through. Cutting spurs - for clean holes with minimal 'break out'. 'Tri-flute' design - for faster chip ejection. Tapered flute - for less binding and ease-of-use. Full length heat treatment - for extra durability.
The new GSB18V-LI Professional is the shortest Lithium Ion combi drill in its class! With only 195mm of head length these dynamic series combi drills represent state-of-the-art Li-ion power combining highest drilling speed with longest run time per battery charge. With Intergrated impact drilling function for drilling upto 13mm diameter holes into masonary. Powerful 60Nm due to newly developed gearbox design and new 4-pole Bosch high-performance motor - for up to 20 holes (6x50mm) in masonry (test...
The radio will work from the mains with the supplied adaptor but you can also plug in your Makita power tool batteries to listen. This model accepts virtually any battery manufactured by Makita from 7.2 up to 18 volts. You can also plug in your ipod or MP3 player and listen to it using the aux plug socket.
The Evo saw is a revolutionary and unique saw that has been developed through extensive user research and ergonomic principles. The unique, patented design ensures that you get a quicker, more efficient cut as you use the whole length of the blade. It has triple ground, hardpoint teeth (10 tpi) for optimum speed and quality of cut. The handle has a soft-grip and is set to enable flush cutting. The top of the blade allows for 45 and 90° marking of the work piece.
1 x Single Flute dia 4.8mm. 3 x Two Flute dia 6.3mm, 12.7mm & 19mm. 1 x Dovetail dia 12.7mm. 2 x Guided Round Over radius 9.5mm & 12.7mm. 1 x Guided Chamfer 45 degree. 1 x Guided Roman Ogee radius 4mm. 1 x Guided Trimmer dia 12.7mm. 2 x Guided Cove radius 6.3mm & 12.7mm. 1 x 'V' Groove 45 degree. 1 x Core Box radius 6.35mm. 1 x Guided Rebater 11.1 rebate.
5 pack Thin Metal recip blade ideal for cutting thin metal. Stays sharp longer, cuts faster and keeps on going long after other blades have quit. You'll experience how its advanced construction with T2 technology enables it to take a beating without breaking.
- The impact rate changeover mechanism enables the user to select between the single and continuous mode. The fine setting is suitable for delicate and low torque work such as tightening small machine screws. The hard setting is suitable for high torque work such as tightening large wood screws
Bosch have provided true corded performance with this 36v cordless SDS+ Hammer Drill supplied with a quick change chuck & 4.0ah Li-ion batteries
A four piece drill countersinking and screwdriving flip over set. Supplied with quick-change shank for fitting into Snappy Quick Chuck. Drill length can be adjusted with 5/64inch A/F hex key and is supplied with No 2 Pozi¨ drive insert bits.
Panel bolt connectors to connect worktop joint together.
High quality hammer drill bit with 4 cutter X-head design for improved user comfort, reduced vibration and improved hole quality. 4-Flute spiral with maximised flute entry. 4-flute spiral with maximised flute entry increases drilling speed and debris removal. Maximised central core for increased energy transmission. Heavy-duty shank for maximum durability. Heavy-duty shank for maximum durability. DT9420 Specifications Diameter 22 mm Length 540 mm Working Length 400 mm Cutters 4 Pack Quantity 1
This twelve piece cutter set contains a range of the most widely used cutters for decorative woodworking. Excellent value for money. Supplied in plastic carry case.
Makita heated jacket which utilses Makita 10.8v Lithium-ion batteries. The jackets have 3 x heat settings and have 3 heated zones to keep you warm.
Makita heated jacket which utilses Makita 10.8v Lithium-ion batteries. The jackets have 3 x heat settings and have 3 heated zones to keep you warm.
The latest addition to the range of Makita cordless 18v kits replaces the popular DK18027. The essential Li-ion LXT kit comprising compact, high-torque combi drill, impact driver with all-metal gearing, 165mm circular saw, angle grinder with thermal overload and accidenal start protection, reciprocating saw with tool-free blade change and torch with 5-position head. Combi drill features fan-cooled motor and automatic spindle lock. Impact driver features 4-pole motor for excellent power transmission...
Holds door while drilling and fitting locks. No set-up time needed. No more searching and alternative door stops. Padded to prevent door and floor damage. For doors up to 55mm thick. Patent No. PCT/EP2006/006072.
Trend biscuits are made of die cut beech. Beechwood biscuits whih expand when in contact with a woodworking adhesive such as PVA glue. They are ideal for strong, fast, and accurate jointing of hard and soft woods, plywood and composition board. Compared to doweling, biscuit jointing is faster and more precise.
Heat treated tool steel countersink with a HSS drill. Adjustable for different length screws and can produce a 9.5mm (3/8 inch) diameter counterbored hole for woodplugs. The drill produce pilot holes only
The combination of angle and distance measurements allows you to determine distances where conventional methods fail. The horizontal distance, for example, can also be determined quickly and efficiently past obstacles or the elevation of a tree, even though there is no reflective point. Digital Pointfinder
Fitted with a router fine height adjuster for above and below height adjustment, one revolution of the handle equals 1.5mm supplied with three quick release recesses in base to fit tables in conjunction with an optional Quick Release Kit with fittings for optional Clamp Guide System Kit&an extra large base aperture for large cutters
Heat treated tool steel countersink with a HSS drill. Adjustable for different length screws and can produce a 9.5mm (3/8 inch) diameter counterbored hole for woodplugs. The drill produce pilot holes only.
Max. Torque: 165Nm. Power Output: 280W. No. Load Speed" 0-2800rpm. Impacts per Minute: 0-3200 ipm. Max. Bolt dia. M12.
Applications include: Noggins, Timber Frame Erection, Stud Work, Floor Boarding, Soffits, Roof Battening, Shuttering, Roof Decking, Panelling, Flat Roofing, Packaging, Decking, Cladding, Fencing, Joists, Overboarding
2nd replacement battery pack Li-Ion 4.2 Ah. TCL 3 charger. fine tooth saw blade HW W48. chip collection bag. splinterguard. Flag window; vision panel. operation tool. in a SYSTAINER SYS 5 T-LOC.
If you are looking for a small and compact site radio, look no further than the GML SoundBoxx Professional jobsite radio from Bosch. It can be operated with all standard 14.4 and 18 volt professional batteries from Bosch with capacities of 1.3 Ah to 4.0 Ah. Two high-quality five-watt speakers deliver rich sound, while 20 volume levels and an equalizer function for bass and treble control ensure optimum sound quality on the jobsite.
Two switch levers with variable speed control; Trigger switch on tool handle & Paddle switch on tool body to make operation easier at any grip position for versatile applications by using either trigger
1 x 14mm bit. 1 x 16mm bit. 1 x 18mm bit. Compact length, designed to fit between studs. Full screw tip - for ease of use and pull through. Cutting spurs - for clean holes with minimal break out. Quick release Shank - Compatible with Snappy, Quick Switch and other quick release drilling systems.
APACHE APBHBLACK KNITTED BEANIE HAT BLACK&nbspFeatures One size fits all warm beanie hat made from 100 Acrylic Apache Workwear a newly launched range of durable high quality workwear at competitive prices from the manufacturers of Apache Safetywear Apache safetywear is the choice of DIY and professionals in heavy industry construction and specialist sectors such as airport security 100 Acrylic
A small useful steel wrecking bar of 190mm. Can be used to pull small nails, strip of wood, or to open cans. It has three different functions for pulling out nails
SUPERFAST PLUS provides an exceptionally strong bond between almost all kinds of materials, with the exception of polyethylene, polypropylene and fluorine containing plastic materials. Materials which can be bonded: ABS, aluminium, bakelite, bronze, buthyl, celluloid, choroprene, chrome, delrin, glass, copper, natural rubber, NBR, neoprene, nitril, nylon, phenol, polycarbonate, polystyrene, porcelain, hard PVC, stainless steel, steel. For
Bosch 10.8v Circular Saw supplied in L-BOXX with 2 x 2.0ah Li-ion Batteries and charger. Boasts a 26.5mm depth of cutin wood.
Professional quality tape measure, suitable for all kinds of measuring jobs, regular, overhead and vertical measuring. Nylon coated and double side printed blade
It is extremely robust, and its Electronic Motor Protection shuts down the motor in the event of overload. This means that the rotary drill remains fully functional even after a 2 metre drop.  Innovative COOL pack batteries ensure optimum heat dissipation and therefore increase lifetime by up to 100%. The battery can be charged regardless of the charging state at any time, without damaging the cells.
It can remove screw sizes from Nos. 6 - 14 and broken bolts from size M4 - M8. Removes cleanly from wood, metal or plastic. Hardened tool steel.
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Ideal for cutting kitchen worktops.
Professional quality tape measure, suitable for all kinds of measuring jobs, regular, overhead and vertical measuring.Pro Touch soft grip case with steel side panels for extra case protection
- Cutters are tungsten carbide tipped with a teflon coating and can be used in natural timbers, particle board and fibreboard.
Electronic full wave variable control of spindle speed under load for a fine finish on all types of material.
The Irwin Universal 880 Triple Ground Hardpoint 22in Saw is fitted with a high quality C75 steel blade and features a unique Triple Ground tooth design offering up to 25% faster cutting performance than traditional double ground saws. The blade is treated with a water based laquer providing four times the added protection than conventional anti-rust agents.
The Makita HR2610 SDS+ rotary hammer drill is a replacement for the discontinued HR2470 SDS Drill. It features compact and lightweight design, ergonomic grip and many other features designed for more comfort and better control. 3 modes: Rotation only / Rotation with hammer action / Hammer only for chipping and channeling.
MultiSolve is a complete new multi-purpose solvent; for the safe removal of adhesives and sealants. Application: Just spray C-TEC MULTISOLVE onto the desired surface then within seconds it gets to work leaving the surface ready for treatment. Available in handy 500ml aerosol. Ideal as preliminary treatment for paints or adhesives. The safest and cheapest solution for your paintwork. Removes adhesives, sealants, oil, grease, silicon, wax, tar, paraffin, printing ink etc. Leaves no oil film. Fast,...
Electronic full wave variable control of spindle speed under load for a fine finish on all types of material. Soft start eliminates sudden movement of machine on start up. Two column precision base with large phosphor bronze bushes for plunging accuracy. Spindle lock and hex collet nut results in easy cutter changes with the 22mm spanner supplied. Adjustable twin rod parallel side-fence guide with integral micro-adjuster for straight edge work. Precision machined one-piece multi-slit collet for...
Precision engineered Die-cast lightweight aluminium body offers amazing strength. Super accurate solid-block acrylic vials provide the best-in-class accuracy.
Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base.
Ratings and Reviews