Operating voltage: 220-250V AC. Max current rating: 13A. Max surge protection: L-N 6500A, L-E 4500A, N-E 4500A. Neon Indication: none- these can inject noise into the system. Mains Cable: shielded with aluminium foil.
Aria DCT+++ is deep cryogenically treated to "+++" level, which involves further complex temperature processes, adding further improvements over standard DCT. In addition, double braided screen with silver plated copper for superior RFI rejection, a must with increased use of broadband connections and central heating systems able to play havoc with cabling set-ups. The cable is terminated with high quality Eichmann RCA Bullet Plugs.
Helps eliminate Radio Frequency Interference that can degrade the sound and Pictures of Hi-Fi and Home Cinema systems. It also incorporates a substantial surge protection circuit to protect delicate equipment against spikes and surges on the mains supply. The product sits "above the mains" so to speak and not in line with the equipment and is preferred by many enthusiasts as it is inferred that less impedance is introduced into the line.
STB-MS is the original vinyl stabilizer produced with innovation concepts. It is composed by detachable 10 parts and its weight is changeable by the number of the weights for your best timbre tuning. And, the optional carbon weight, 「STB-CM」, can be equipped according to you preference. Furthermore, it can be used for EPs by flipping it upside down.
Secondly, having a high quality connection to the mains where nothing is lost from wall socket to equipment is arguably one of the most important considerations in an AV system. The mains energy is after all what ends up being the sound after passing through your system, so logic goes that the better quality the mains supply, the sound and picture quality possible from your system should also be better.
RHAPSODY is a great choice as an entry level cable because it delivers superb sound reproduction in most systems and genuinely improves clarity, bass and overall detail. It is assembled at the Black Rhodium factory in Derby using high purity tinned copper conductors, and a specialist silicone rubber insulation and high quality RCA Phono plugs.
Secondly, having a high quality connection to the mains where nothing is lost from wall socket to equipment is arguably one of the most important considerations in an AV system. The mains energy is after all what ends up being the sound after passing through your system, so logic goes that the better quality the mains supply, the sound and picture quality possible from your system should also be better.
The MKII Moth Record Cleaning machine is based upon the well proven and accepted record cleaner that has been available from Moth for a number of years. The MKII version of the machine allows for bi-directional operation of the turntable in both the fluid application 'Wash' cycle and in the vacuum 'Drying' phase. The vacuum tube has been modified to allow for the new two way movement and to offer a more efficient vacuum system. A full size dark acrylic lid is fitted to the MKII Moth Record Cleaning...
TANGO delivers plenty of insight into what is happening in the lower octaves and is ideal with smaller speakers giving you that surprising insight into bass music without losing any refinement at high frequencies. An ideal choice for bookshelf and any other quality loud speakers. Made in England.
TANGO delivers plenty of insight into what is happening in the lower octaves and is ideal with smaller speakers giving you that surprising insight into bass music without losing any refinement at high frequencies. An ideal choice for bookshelf and any other quality loud speakers. Made in England.
Treated with our advanced DCT++ process, which along with standard deep cryogenic treatment, adds improvements to depth, clarity and timing of audio and visual. The additional processes before and after DCT take these improvements to a much higher level.
The MKII Moth Record Cleaning machine is based upon the well proven and accepted record cleaner that has been available from Moth for a number of years. The MKII version of the machine allows for bi-directional operation of the turntable in both the fluid application 'Wash' cycle and in the vacuum 'Drying' phase. The vacuum tube has been modified to allow for the new two way movement and to offer a more efficient vacuum system. A full size dark acrylic lid is fitted to the MKII Moth Record Cleaning...
The MKII Moth Record Cleaning machine is based upon the well proven and accepted record cleaner that has been available from Moth for a number of years. The MKII version of the machine allows for bi-directional operation of the turntable in both the fluid application 'Wash' cycle and in the vacuum 'Drying' phase. The vacuum tube has been modified to allow for the new two way movement and to offer a more efficient vacuum system. A full size dark acrylic lid is fitted to the MKII Moth Record Cleaning...
Black Rhodium cables have won numerous awards and reviews for their excellent range of mains blocks and cables, manufactured in England. Mains Cables R Us are authorized Black Rhodium stockists, please contact us for any products you may need.
Silver plating improves the conductivity of the plug as silver is the best conductor of electrons known to man, our plating is done by a company founded in 1951, they are one of the UK's most experienced platers and the quality of plating is the best we have ever seen. The silver plated version of the MK plug is amongst the top selling products in our range and a true top performer.
Cable manufactured in England. 2 core cable. Low impedance high cross section conductor wire for superior low frequency response and stereo imaging. Silicone rubber insulation for accurate portrayal of the leading edges and decays in music. Silver plated copper conductors for greater clarity of sound. Advanced quality control of the wire direction in the manufacturing process to ensure consistent superior stereo imaging and low background noise. Exclusive Black Rhodium post production process...
The original turntable sheet, “MJ-12”, is designed to trace the groove on the vinyl absolutely. The surface of MJ-12 is recurved 1.0 degree which makes the record surface closely fit to MJ-12 by using a stabilizer (more than 300g is recommended). This corrects the warpage of an analog record and makes the stylus moving stable.
The cable we use is legendary, popular for over 20 years and still going strong, Belden 19364 cable is the number 1 choice for audiophiles worldwide because it offers superb performance for such little cost.
Individual material has only one vibrational mode. This means that it might be suffer from the disadvantage of specific character of each material. In order to disperse the vibrational mode of the carbon material, we employed a new material called "silver carbon" which is the high-density glass fiber processed by aluminum metalizing coating and has moderate hardness.
The Oyaide MJ-12 turntable mat and accompanying STB-MS stabilizer in our opinion is the best solution to play vinyl records on. To hear it is to want it.
Oratorio DCT ULTRA RCA uses Oyaide SLSC precision connectors that feature a 4N pure silver inner connector and rhodium over silver plated brass outer connector. Oratorio DCT ULTRA XLR uses Oyaide Focus – 1 precision connectors with Rhodium over silver plated phosphor bronze connectors with Svarovski rhinestones in blue and red encased in its shell for channel identification. The fully assembled cable is treated with a second DCT treatment and our exclusive ‘Crystal Sound’ process. The DCT process...
STB-MS is the original vinyl stabilizer produced with innovation concepts. It is composed by detachable 10 parts and its weight is changeable by the number of the weights for your best timbre tuning. And, the optional carbon weight, 「STB-CM」, can be equipped according to you preference. Furthermore, it can be used for EPs by flipping it upside down.
Send your LP's to us and we will profesionally clean them on a Glass Audio professional RCM which cleans both sides at once and return them by courier.
The Oyaide range of IEC connectors undergo attention to detail like no other in the hi-fi industry. We use these in our own system as well as cables and other connectors. These plugs are not merely highest grade; every step is taken to realize the ‘State of the Art’ for Audio & Hi-Fi. Every one of our products are totally ‘made in Japan’ even down to minute component, all because for us to maintain our high standard of quality and reliability, it is essential to have every production system under...
The body and housing of SLSC/SLSB, made of brass and processed by CNC machining, are high-density and have high shielding performance compared to an existing lost-wax processed body. For its surface treatment, hard chrome plating is coated like a body of camera. The knurled pattern on the surface of SLSC enhances the handling property.
We enhance our product quality by paying careful attention to each detail of structural characteristic, texture and appearance. When such details are integrated successfully, a product is completed perfectly. All elements, the impression of rigidity, beautiful guilloche pattern on the surface inspired by luxurious Swiss watch, brilliance of the buff finished body, and the blue stainless-steel screws which are reminiscent of clock hands, represent sublime sound image of SRBN. SRBN is the extreme banana...
Every one of our products are totally ‘made in Japan’ even down to minute component, all because for us to maintain our high standard of quality and reliability, it is essential to have every production system under our direct and strict control. Our products are for special market where minute vibration from loose connection or due to imperfect choice of material could become a vital failure. We carefully design each and every component for easiness in assembling, simplicity and safety. We carefully...
Our filters are specifically designed to combat both "Asymmetrical" as well as "Symmetrical" interference, both being effectively suppressed by the introduction of High Frequency Capacitors and a single Choke. In addition we have also incorporated an Earth Line Choke to stop interference through the mains earth line, finally we use a screened Mains Cable to eliminate the effects of radiated noise interference.
Focusing attention on the acoustic property of the carbon, we at Oyaide Electric have release many audio accessories. Applying this know-how, "STB-CM" was produced as the multi-use carbon pipe which is made of 3mm thick, highly-rigid and lightweight carbon CFRP.
* Main conductor: α (Alpha) Phosphor bronze conductor Rhodium or 24k Gold plated. * Housing: Carbon fiber, nonmagnetic stainless, eutectic copper alloy. * Nylon (red/white) and Polycarbonate (clear) insulation. * Connections: Soldered or set-screw. * Specified for core diameters up to 4.5mm.
* Patent-pending Torque Guard construction. * Main conductor: α (Alpha) Pure Copper conductor Rhodium or 24k Gold plated. * Housing: Carbon fiber, nonmagnetic stainless, eutectic copper alloy. * Nylon (red/white) and Polycarbonate (clear) insulation. * Connections: Soldered or set-screw. * Specified for core diameters up to 4.5mm.
The Furutech FI-15 E has a tough, impact-resistant nylon housing providing abuse and arc resistance. Flame retardant, and shock absorbing. Powerful offsetting cable grip clamps on individual conductors and outer cable jacket to prevent strain on terminals. Individually moulded face keeps debris out of plug interior. Picture-window wiring and individual chambers for easy inspection of terminals after wiring. Easy, quick and secure assembly.
* Specifications: Accommodates wire diameters to 3.2mm. * Connection: Set screw. * Dimensions: 50.9mm (W) x 24.1mm (D) x 28.8 (H). * Rated: 15A/250V.
* α (Alpha) copper alloy conductor. * PBT and fiberglass housing. * Dimensions: 44.0mm (W) x 28.6mm (D) x 33.0mm (H). * Rating: 10A/250V. * Standard : IEC 320-1 C14. * Approvals : UL/CE/CSA/VDE/DEMKO/SEMKO/NEMKO/FIMKO.
24k gold-plated terminals * 5 x 20mm * Type: 2-Pole + Earth. α (Alpha) copper alloy conductor. PBT and fibre-glass housing. Dimensions: 44.0mm (W) x 28.6mm (D) x 33.0mm (H). Rating: 10A/250V. Standard: IEC 320-1 C14. Approvals: UL/CE/CSA/VDE/DEMKO/SEMKO/NEMKO/FIMKO.
* Main conductor: α (Alpha) Phosphor bronze conductor Rhodium or 24k Gold plated. * Housing: Carbon fiber, nonmagnetic stainless, eutectic copper alloy. * Nylon (red/white) and Polycarbonate (clear) insulation. * Connections: Soldered or set-screw. * Specified for core diameters up to 4.5mm.
Accommodates wire diameters to 4mm (set-screw). Dimensions: 60 (W) x 30mm (D) x 36.2mm (H). Body length: 40.0mm x 44mm diameter x 80mm overall length. Rated: 15A/250V. Type: 2-pole+earth. Rating: 15A 250V A.C. Pure copper a (Alpha) Conductor. Materials: Nylon/fibre-glass.
The FI-09 IEC inlet is available in gold and rhodium plated versions, requires no soldering and is an audiophile quality product for an instant performance up-grade to any equipment with an IEC socket.More details
Surely the most cost effective Furutech up-grade available, for under £15.00 replace the IEC inlet on your CD player, amplifier, or any other equipment with an IEC socket.* α (Alpha) Eutectic (low temperature) cast copper alloy Conductor * PBT and fiberglass housing * Connections: SolderedThe IEC inlet in almost all hi-fi and home cinema equipment will cost less than a pound and be shall we say not much good, exceptions will occur but generally replacing this item will reap benefits and allow your...
The FI-09 IEC inlet requires no soldering and is an audiophile quality product for an instant performance up-grade to any equipment with an IEC socket.
The Arezzo has been designed to outperform any other turntable at anywhere near its price and has many unique features. It is covered by a 24 month comprehensive guarantee. You can purchase the Arezzo with complete peace of mind - if you are not 100% happy with it, return it within seven days for a complete refund (less carriage). The turntables are initially available to fit Rega manufactured tonearms only (RB250 / 300) - please email if you require us to supply & fit a tonearm or cartridge. Please...
Accommodates wire diameters to 4mm (set-screw). Dimensions: 60 (W) x 30mm (D) x 36.2mm (H). Body length: 40.0mm x 44mm diameter x 80mm overall length. Rated: 15A/250V. Type: 2-pole+earth. Rating: 15A 250V A.C. Pure copper a (Alpha) Conductor. Materials: Nylon/fibre-glass.
24k rhodium-plated terminals * 5 x 20mm * Type: 2-Pole + Earth. α (Alpha) copper alloy conductor. PBT and fibre-glass housing. Dimensions: 44.0mm (W) x 28.6mm (D) x 33.0mm (H). Rating: 10A/250V. Standard: IEC 320-1 C14. Approvals: UL/CE/CSA/VDE/DEMKO/SEMKO/NEMKO/FIMKO.
This block is fitted with schuko sockets for use in europe where mains plugs have no fuses fitted, generally this results in better sound quality as the fuse is removed from the signal path. Only the UK, China, Cyprus and 1 or 2 other country's use fused mains plugs, all other countries use fuseless plugs. This item is supplied as standard with an Oyaide C037 rhodium/silver plated schuko plug.
Pure copper α (Alpha) Conductor. Earth (Ground) Jumper System. Nylon and fibre-glass housing. Polycarbonate shell. Specified for cable diameters of 6.6mm to 16mm. Dimensions: Body length 48.2mm x 38mm diameter x 74mm overall length. Rated: 15A/125V. PSE JET:15PJET090. USL /CNL Listed:04CA26110. Type: 2-pole+earth.
* α (Alpha) Pure copper main Conductor (t：1.2 mm). * Cover material: Poly carbonate cover. * Chassis plate material: The special grade aluminum front plate (t:10mm). * Body material: Nylon/fiberglass body. * Specified for wire diameters of 2.8mm or 5.5 Sq.mm/10AWG Max. (set screw).
The company’s philosophy is to design and develop products starting with a completely blank canvas and ask “what is really happening with this process, in these materials” and build on solid fundamentals. That is why you may find that what they produce might look a little different from what you might expect, but that is because the company is focused on how to get a better, clearer sound.
Cable manufactured in England. 2 core screened cable. Silver plated copper conductors for greater clarity of sound. Low loss PTFE inner insulation designed for clearer beat and rhythm of music. Silver plated copper braided screen to eliminate noise and interference. Advanced quality control of the wire direction in the manufacturing process to ensure consistent superior stereo imaging and low background noise. Exclusive Black Rhodium post production process delivers improved sound quality....
* Patent-pending Torque Guard construction. * Main conductor: α (Alpha) Pure Copper conductor Rhodium or 24k Gold plated. * Housing: Carbon fiber, nonmagnetic stainless, eutectic copper alloy. * Nylon (red/white) and Polycarbonate (clear) insulation. * Connections: Soldered or set-screw. * Specified for core diameters up to 4.5mm.
* Pure copper a (Alpha) Conductors. * Connections : Soldered or Crimped. * Specified for cable diameters up to 4mm. * Dimensions: Space between Conductor: 8.2mm.
Pure copper α (Alpha) Conductor. Nylon and fibre-glass housing. Dimensions: Body length 60.4mm x 30.4mm diameter x 38.7mm overall length. Rated: 16A/250V (UKand Europe) or 20A/125V (USA). Type: 2-pole+earth.
Pure copper α (Alpha) Conductor. Nylon and fibre-glass housing. Dimensions: Body length 60.4mm x 30.4mm diameter x 38.7mm overall length. Rated: 16A/250V (UKand Europe) or 20A/125V (USA). Type: 2-pole+earth.
Alpha Design Labs from Furutech: a brand new range of quality interconnects in 1 metre pairs, featuring gold-plated locking phono plugs and silver-plated conductors deep cryogenically treated.More details
As Arezzo, including factory fitted balanced flywheel/pulley assembly with 5 belt drive system. The Arezzo Kinetic is optimised for 33rpm vinyl playback as this speed is used predominantly by most people. When playing at 33rpm all 5 belts are utilised, a short belt drives the flywheel from the motor, and this runs under the Arezzo subplatter. 3 belts then drive the subplatter from the pulley on the flywheel and a further belt drives from the motor to the sub platter. This gives the Arezzo Kinetic...
SRM Tech are based in the UK and manufacture 2 ranges of turntable, all with unique features which set them apart from the competition, the Athena comes supplied with a Moth tone-arm (rega clone) and just needs a cartridge to start playing.
The Ultra is the ultimate Arezzo including the balanced flywheel and our high current power supply. The high current power supply is housed in a sleek black acrylic case and includes mains filtering. The Arezzo Isolation Platform is again made from jet black acrylic and sprung by 4 sorbothane feet. Unlike the Arezzo's base, the Isolation Platform has square corners enabling the MegaCover to sit perfectly on it.
Eutectic copper alloy α (Alpha) Conductor. Fireproof ABS body/housing. 24k gold-plated connectors. Specified for cable diameters of 6mm to 20mm. Dimensions: Body length 48mm x 50.2mm diameter x 55.8mm overall length. Rated: 13A/250V. Type: 2-pole+earth.
Exciting, open sounds, with plenty of bass and clarity in the midbands!DCT Treated for Exceptional Performance guaranteed. Cable manufactured in EnglandTwisted 2 core cableSilver plated copper conductors for greater clarity of soundLow loss PTFE inner insulation designed for clearer beat and rhythm of musicTightly twisted for superior noise rejectionAdvanced quality control of the wire direction in the manufacturing process to ensure consistent superior stereo imaging and low background noise.Exclusive...
REVIEWED IN THIS MONTH'S HI-FI WORLD AND HIGHLY RECOMMENDED by DAVID PRICEOne of the best kept secrets in the Black Rhodium range of interconnects, the Phantom has been DCT treated and offers a stunning performance for the money, available in 0.5 metre, 1 metre and 1.5 metre. Full money back guarantee if not delighted.The PHANTOM is a mid priced cable, aimed at those who are serious about their music, whilst at the same time utilising advanced production techniques to ensure that this cable offers...
Alpha Design Labs from Furutech: a brand new range of quality interconnects in 1 metre pairs, featuring gold-plated locking phono plugs and silver-plated conductors deep cryogenically treated.More details
Furutech High End Performance XLR Connectors Rhodium Plated. Price per piece.
Furutech High End Performance XLR Connectors 24k Gold-Plated. Price per piece.
* α (Alpha) Pure copper main Conductor (t：1.2 mm). * Cover material: Poly carbonate cover. * Chassis plate material: The special grade aluminum front plate (t:10mm). * Body material: Nylon/fiberglass body. * Specified for wire diameters of 2.8mm or 5.5 Sq.mm/10AWG Max. (set screw).
We treat the contact strips inside the blocks with de-oxit contact cleaner to remove surface contaminants from the metal surface, we then send the rails to be plated, we dis-able the on-off switch and light as they can have a detrimental affect on sound quality. The blocks themselves are heavy duty aluminium lined for strength and rigidity, they are manufactured in Germany to exacting standards and we offer them with 4, 6 or 8 sockets to suit your system's requirements.
“The original Mini Sub is the product that put IsoTek on the map,” said Keith Martin, IsoTek’s founder and Managing Director. “In may ways, it was also responsible for making mains conditioning a serious component of the UK hi-fi scene, introducing a legion of audio fans to the tremendous improvements that effective mains conditioning can bring to any hi-fi system. Replacing such a stalwart with a new model is a tremendous responsibility, but no one who tries Aquarius can be in any doubt that we...
* Rhodium-plated α (Alpha) phosphor bronze conductor. * Teflon Insulated Body. * Nonmagnetic stainless steel housing. * Soldered connections. * Specified for cable diameters max. 10.0mm. * Dimensions: FP-DIN * 14.0mm diameter x 54.0mm overall length. * FP-DIN(L) * 45(L) X 19(W) X 33.4(H) mm approx..
The TP306 VR tube preamplifier is designed with a view to providing the highest possible audio quality. This is achieved through great attention to detail in the overall electrical and mechanical construction of the preamplifier; and consequently puts enormous demands on the selection of tubes, to ensure that the parameters of both channels are identical. In order to ensure the highest audio quality Canor use the EZ81 vacuum diode to rectify the anode voltage in the power supply. In this fully-valved...
99.99% pure silver conductors for superior clarity of sound. Low-loss PTFE inner insulation designed for clearer beat and rhythm of music. Double silver-plated copper braided screen for superior RFI and noise rejection. Advanced quality control of the wire direction in the assembly process to ensure consistent, superior stereo imaging and low background noise. Deep cryogenic treatment of the cable increases the depth, clarity and timing of the music, with additional temperature processes employed...
Start with the source for up-grading your mains performance with our de-oxit treated uk wall socket. De-oxit treated earth bar and 2 complete treatmenst to live and neutral contacts, substantial contact screws finish off this must have up-grade for every hi-fi enthusiast who wants to get the best performance from their system.
The Techniboot is manufactured from an advanced visco-elastic polymer, developed especially for the Technics SL1200 series of turntables. The boots will appeal to both DJ's and audiophiles. They simply push over the existing stock feet to increase resonance control and dampening. Ideal for absorbing the vibrations when used as a DJ deck and also for audiophiles to add an extra degree of resonance control and isolation.
* Patent-pending Torque Guard construction. * Main conductor: α (Alpha) Pure Copper conductor Rhodium or 24k Gold plated. * Housing: Carbon fiber, nonmagnetic stainless, eutectic copper alloy. * Nylon (red/white) and Polycarbonate (clear) insulation. * Connections: Soldered or set-screw. * Specified for core diameters up to 4.5mm.
Manufactured by us are a set of 4 isolation /support feet for the Technics SL1200 and SL1210 turntables. Made from a special elastomeric material housed in a non resonant carrier, the feet simply snap into the underside of the turntable, no special skills or tools required. Fit and forget.
Pure copper α (Alpha) Conductor. Earth (Ground) Jumper System. Nylon and fibre-glass housing. Polycarbonate shell. Specified for cable diameters of 6.6mm to 13mm. Dimensions: Body length 31mm x 33.5mm diameter x 72.5mm overall length. Rated: 10A/250V.
Pure copper α (alpha) conductors. Connections: crimped or soldered. Treated with Furutech’s α (alpha) process to minimize transmission loss. Material: UP-OCC copper with 24k gold-plating. Maximum wire diameters up to 4.0mm. Dimensions: Space between Conductor: 8.2mm o 12.9mm ± 0.1 (W) x 24mm ± 0.1mm overall length.
Pure copper α (alpha) conductors. Connections: set-screw or soldered. Treated with Furutech’s α (alpha) process to minimize transmission loss. Material: UP-OCC copper with 24k gold-plating. Maximum wire diameters up to 6.0mm. Dimensions: Space between Conductor: 8.2mm o 12.9mm ± 0.1 (W) x 40mm ± 0.1mm overall length.
* α (Alpha) Pure copper main Conductor (t：1.2 mm). * Cover material: Poly carbonate cover. * Chassis plate material: The special grade aluminum front plate (t:10mm). * Body material: Nylon/fiberglass body. * Specified for wire diameters of 2.8mm or 5.5 Sq.mm/10AWG Max. (set screw).
* Main conductor: Silver-plated a (Alpha) OCC Conductors. * Main Insulation: Special-grade high-density polyethylene. * 3-layer shield construction for improved noise insulation. * Connectors: Furutech-engineered 24k gold-plated USB series Connectors. * The best damping and insulation materials for improved frequency extension and tonal balance. * Cable Types. * Cable Lengths.
* α (Alpha) Pure copper main Conductor (t：1.2 mm). * Cover material: Poly carbonate cover. * Chassis plate material: The special grade aluminum front plate (t:10mm). * Body material: Nylon/fiberglass body. * Specified for wire diameters of 2.8mm or 5.5 Sq.mm/10AWG Max. (set screw).
Cable manufactured in England. 4 core bi-wire cable. Low impedance high cross section conductor wire for superior low frequency response and stereo imaging. Silicone rubber insulation for accurate portrayal of the leading edges and decays in music. Silver plated copper conductors for greater clarity of sound. Advanced quality control of the wire direction in the manufacturing process to ensure consistent superior stereo imaging and low background noise. Exclusive Black Rhodium post production...
* Main conductor: Silver-plated a (Alpha) OCC Conductors. * Main Insulation: Special-grade high-density polyethylene. * 3-layer shield construction for improved noise insulation. * Connectors: Furutech-engineered 24k gold-plated USB series Connectors. * The best damping and insulation materials for improved frequency extension and tonal balance. * Cable Types. * Cable Lengths.
Furutech's audiophile grade XLR connectors, female version, rhodium plated, price is per piece.
IeGo Dreamworks are manufacturers of audiophile grade cables and connectors and produce some of the best connectors available regardless of price. They use pure Furukawa copper as the base material un-like many of their competitors who use phosphour bronze and brass which is not as good a conductor as pure copper. The copper is acid bathed to remove impurities and the entire connector is cryo treated to relieve internal stresses within the material which also improves conductivity. The gold plating...
* α (Alpha) pure-copper 24k Gold-plated or Rhodium-plated conductors. * Connections:Terminal press or Soldered. * Special two stage fixed wire crimp construction to ensure contact stability. Inner crimp for raw conductor and outer crimp for unstripped wire. * Specified for wire diameters of up to 6mm max. * Dimensions:Space between conductor 8.1mm/13.0mm(W) x 35.5mm overall length Crimp barrel: 8.0mm Outer diameter x 15.0mm (L).
* Pure copper a (Alpha) Conductors. * Connections: Set screw or solder. * Specified for cable diameters up to 6mm. * Dimensions: Space between Conductor: 8.2mm.
The original Wattgate 320i is one of the most popular and best selling connecotrs on the market, it is a step up from the standard IEC supplied with any budget mains cord, at Mains Cables R Us we were one of the first to offer the Wattgate 320i with silver plated contact pins, silver plating improves conductivity, fact. Expect our silver plated version of this connector to out-perform the standard 320i by a considerable margin.
The CD2 is a substantially built valve CD player, and is available in both black and silver. At the heart of the player is the impressive 24-bit/192kHz Burr-Brown PCM1792A digital-to-analogue converter. This is employed alongside 2 x 12AX7 (ECC83), 2 x 6922 (ECC88 equivalent) tubes and 1 x EZ81 rectifier diode. The meticulously designed power supply allows the player to create a soft, yet full-scale and detailed sound, devoid of any interference voltages. The CD2 VR tube compact disc player employs...
RHAPSODY is a great choice as an entry level cable because it delivers superb sound reproduction in most systems and genuinely improves clarity, bass and overall detail. It is assembled at the Black Rhodium factory in Derby using high purity tinned copper conductors, and a specialist silicone rubber insulation and high quality RCA Phono plugs.
* Pure copper a (Alpha) Conductors. * Connections: Set screw or solder. * Specified for cable diameters up to 6mm. * Dimensions: Space between Conductor: 8.2mm.
The management section that provides overall amplifier control is completely galvanically separated from the audio section; and the transformer core is vacuum-impregnated so as to ensure the lack of any transformer hum. Furthermore, the area that controls power supply employs very effective high-frequency filters, and anode voltage is rectified by vacuum diodes and is filtered with high-capacity capacitors.
Mains Cables R Us silver 6 gang mains extension power block. All internal contact strips have been silver plated for optimum conductivity, silver is the best conductor of electrons known to man. Our mains block is plated by a company with over 50 years experience in their field.
Passivated pure fine silver contacts. The body is constructed of Ultramid®, while the negative contact uses Dyneon™. The Barrel is comprised of Al/Mg alloy for improved rejection of EMI. With a characteristic impedance of 75 ohms, the WBT-0110 makes the perfect match for digital audio and video. The maximum size conductor that can be used is 1.5mm² / 16-17 AWG. Maximum diameter of cable with dielectric is 9mm² / 0.354 inches². Connector body available in nine different colors for multichannel identification...
The gold plating is carried out by a supplier founded in 1951 so they know a thing or two about plating, gold adds extra warmth to the sound of your hi-fi system, gold plating improves conductivity, it is not as bright sounding as silver plating but still imparts an improvement over standard brass plugs, our gold plating is done to exacting standards and you will not be dis-appointed with the performance of the MK gold plated toughplug.
The management section that provides overall amplifier control is completely galvanically separated from the audio section; and the transformer core is vacuum-impregnated so as to ensure the lack of any transformer hum. Furthermore, the area that controls power supply employs very effective high-frequency filters, and anode voltage is rectified by vacuum diodes and is filtered with high-capacity capacitors.
* Connections: Set-screw or Soldered. * Contact pin specially designed to increase contact area and effect stable more transmission. * Unique main body design that ensures very firm wire connections that can be fixed by set screw or soldered. * Treated with FURUTECH a(Alpha) Process to minimize transmission loss. * Material: Banana Conductor—Phosphor Bronze Plate / Housing—Brass. * Dimensions: Housing f11.1mm X 30.3 mm length, Banana Conductor f4.6mm X 19.7 mm length, Overall length = 50 mm.
Attention : Please make sure that the insulator of the devices is attached by screw and detachable before trying attach INS-BS to your device. And since the length of the hole is 5mm, the shorter screws than 5mm cannot be used. In addition, please use a washer if a screw head is smaller than concave. Screws and washers are not included in the package.
A limited quantity of UK mains plugs with white casing, all contact pins are treated with de-oxit to remove contaminants from the metal surface, fitted with a 5 amp silver plated bussmann fuse as standard.
* Connections: Set-screw or Soldered. * Contact pin specially designed to increase contact area and effect stable more transmission. * Unique main body design that ensures very firm wire connections that can be fixed by set screw or soldered. * Treated with FURUTECH a(Alpha) Process to minimize transmission loss. * Material: Banana Conductor—Phosphor Bronze Plate / Housing—Brass. * Dimensions: Housing f11.1mm X 30.3 mm length, Banana Conductor f4.6mm X 19.7 mm length, Overall length = 50 mm.
* Pure copper a (Alpha) Conductors. * Connections : Soldered or Crimped. * Specified for cable diameters up to 4mm. * Dimensions: Space between Conductor: 8.2mm.
At last, the third and final chapter of "TUNAMI series" is coming to the scene. Following the success of TUNAMI GPX power cable, and TUNAMI NIGO speaker cable, TUNAMI TERZO is produced as a signal line interconnects cable to enhance the unlimited potential of TUNAMI power cable. Although it has the same concepts of TUNAMI, it is planned to reborn as a signal interconnect cable without changing the basic structure and material. In addition to its well-built architecture, TUNAMI TERZO RR is equipped...
At last, the third and final chapter of "TUNAMI series" is coming to the scene. Following the success of TUNAMI GPX power cable, and TUNAMI NIGO speaker cable, TUNAMI TERZO is produced as a signal line interconnects cable to enhance the unlimited potential of TUNAMI power cable. Although it has the same concepts of TUNAMI, it is planned to reborn as a signal interconnect cable without changing the basic structure and material. In addition to its well-built architecture, TUNAMI TERZO RR is equipped...
