Storage case for safely transporting and storing T4 router. Ideal for storage of a router on-site or in the workshop.
Details Heat treated tool steel countersink with a HSS drill. Adjustable for different length screws and can produce a 12.7mm (1/2inch) diameter counterbored hole for woodplugs. The drill produce pilot holes only.
Details This image is for illustrative purposes only Makita 6281DP3-ID 14.4V Cordless Combo Kit 6281D Drill Driver + 6935FD Impact Driver, complete with 3 x 1.3Ah Ni-Cad batteries, charger, double ended bit and carrying case.
Details Halves the angle for mitre joints. Use for mitre|cutting of frames, skirting, architrave and beading as well as basic marking out.|Halves angles to achieve correct cutting angle before cutting mitres.|Use for mitre cutting of frame, skirting (not tall skirting), architraves and beading as well as basic marking out.|Sets internal and external angles.|Can be used with hand mitre and snip-off saws.|Patent No. PCT WO 00/67969.
Details Heat treated tool steel countersink with a HSS drill. Adjustable for different length screws and can produce a 9.5mm (3/8inch) diameter counterbored hole for woodplugs. The drill produce pilot holes only.
Storage case for safely transporting and storing T3 router. Ideal for storage of a router on-site or in the workshop.
Details D26500K Features High power motor for effortless cutting, even in hard woods Left and right chip ejection for convenience Front handle depth control in clearly marked 0.1 mm steps for accurate setting with positive indexing Rubber coated front and main handles eliminates slipping for greater comfort and control A large planer blade drum rotating at high speed provides an excellent finish 3 chamfering grooves in the front shoe simplify precision fitting jobs D26500K Specifications...
Ideal for fast chamfering. Popular in the sign making trades. For chamfering edges of plastic material .
Details Heat treated tool steel countersink with a HSS drill. Adjustable for different length screws and can produce a 9.5mm (3/8inch) diameter counterbored hole for woodplugs. The drill produce pilot holes only.
Details This jig uses a set of interchangeable templates & with a router will cut the mortise & face-plate recess for popular door locks. For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1inch face-plate. Deeper mortises can be achieved with a suitable size of auger bit.|Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood.|CNC precision manufacturing plates & body.|The jig requires a plunge router with a 80mm plunge, fitted with...
Details Tooling for metal, glass reinforced plastic (GRP). plastic and wood. Carving, weld removal and drilling hole enlarging. Solid carbide head. For removing welds and burrs in metal, also hand engraving and sculpting wood and metal.
Storage case for safely transporting and storing T4 router. Ideal for storage of a router on-site or in the workshop.
Details This jig uses a set of interchangeable templates & with a router will cut the mortise & face-plate recess for popular door locks. For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1inch face-plate. Deeper mortises can be achieved with a suitable size of auger bit.|Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood.|CNC precision manufacturing plates & body.|The jig requires a plunge router with a 80mm plunge, fitted with...
Details Electronic Speed Control Ensures That The Same Fine Finish Is Achieved In All Grades Of Timber, Aluminium And Plastics Since The Full Wave Electronic Control Ensures The Selected Speed In Maintained Under Any Load. Soft Start To Eliminate Small Initial Movements That Might Misalign The Cutter, Especially Important With Such A Powerful Router. Routing Depth Setting With Fine Adjustment And Magnified Scale For Simple Setting. Two Column Precision Guide With Large Phosphor Bronze Bushes For...
Ideal for fast chamfering. Popular in the sign making trades. For chamfering edges of plastic material .
A precision made laser cut zinc plated steel template comb for the CDJ300.|A 19mm (3/4 inch) through dovetail template.
Details Mitre Saw Specifications Power Input: 1600 Watts Power Output: 960 Watts Blade Speed: 1900 - 3400 rpm Blade Diameter: 305 mm Blade Bore: 30 mm Bevel Capacity: 48 /48 ° Mitre Capacity [right /left]: 50 /60 ° Cutting Capacity at 90 ° /90 ° (W x H): 50x163 mm Cutting Capacity at 90 ° /90 ° (W x H): 345x74 mm Cutting Capacity at 45 ° /90 ° (W x H): 230x94 mm Cutting Capacity at 45 ° /90 ° (W x H): 242x74 mm Cutting Capacity at 90 ° /45 ° (W x H): 50x114 mm Cutting Capacity at...
Details Makita 4350FCTXW Special Edition Orbital Action Jigsaw with Tool-less Blade Fixing and Job Light is powerful and robust with an ergonomic rubberised grip for user comfort. Comes complete with 16 piece blade set, wrench, cover plate and aluminium carry case. Available in 110 or 240 volts. Features: Ergonomic rubberised grip Soft start and constant speed control Variable speed trigger Tool-less blade change Double insulated for added safety Job Light to light the way Blower to clear...
Details Tooling for metal, glass reinforced plastic (GRP). plastic and wood. Carving, weld removal and drilling hole enlarging. Solid carbide head. For removing welds and burrs in metal, also hand engraving and sculpting wood and metal.
Details D26500K-LX, TCT reversible blades, parallel fence, rebate depth guide, dust extraction spout, deflector and chip container. Rebating depth 0-26mm Weight 4kg 110V version includes plug 1050W Left/Right Chip Ejection 3 Chamfer Grooves Parallel & Rebating Fence Park Rest Soft Start Lock-On Switch Dust Ejection Facility
Plug cutter set for No.8 screw size. The set comprises Quick Chuck, Drill/Countersink,Pozi Screwdriver bit and standard Plug cutter
Details A bearing guided reversible finger jointer, to increase the gluing area for edge to edge joints.
Ideal for fast chamfering. Popular in the sign making trades. For chamfering edges of plastic material .
Details D26500K Features High power motor for effortless cutting, even in hard woods Left and right chip ejection for convenience Front handle depth control in clearly marked 0.1 mm steps for accurate setting with positive indexing Rubber coated front and main handles eliminates slipping for greater comfort and control A large planer blade drum rotating at high speed provides an excellent finish 3 chamfering grooves in the front shoe simplify precision fitting jobs D26500K Specifications...
Details A worktop jig, designed to enable all 1/2inch shank plunge routers to cut precise butt & scribe joints in postform workstops.|Machined from hardwearing solid laminate. Will produce a joint in 15 minutes including setting-up time. |Out-of-square joints can be accommodated.|Facilities to cut various widths of board and thicknesses up to 42mm. Integral panel bolt connector recessing template with easy spanner access. Width setting stop for accurate positioning. Supplied with clear & comprehensive...
Details A metal rule depth gauge to set height of router cutters and saw blades accurately. Horizontal & vertical measuring. For hand routers, router tables and saw benches. 60mm wide aperture & accurate to 0.5mm. 80mm measurement range. U section plastic injection moulding with unique cam lever lock. Steel rule dual metric & imperial scale. Self standing for setting cutter depth on router tables and low profile for backfence adjustment. |Patent No. GB2386085. US Appl No. 10/784,780.
Details These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers. Generally HSS cutters are slightly less expensive than their TC grades, but can be more suitable for certain applications.|Chamfer 'V' groove for veining , panelling , 'V' grooving. bevelling & chamfering.
Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' jointed tongue and groove on man-made board.
Larger bearing removes the flat. Supplied with two bearings.
Beads Refs. 9/10 & 9/11 have matching cutters Refs. 8/10 & 8/11 for jointing & hinging.
Details Enables mortise & tenons and dowel joints to be cut with a router to be cut with a router. Ideal for cabinet, chair and table.|CNC precision manufactured plates and body.|One set-up for both mortise and tenon giving perfectly fitting joints.|Fully adjustable for compound angle joints up to 45 degree.|Reversible templates to produce round and square end tenons. Templates can be used for accurate dowelling applications.|Cuts mortise & tenon sizes of 1/4inch (6.35mm) to 5/8inch (15.9mm).|Guide...
These 'Eight in One' Cutters sets have been designed to cut eight different profiles. Can be used portably or in a router table. Use B2 for a 1.6mm quirk and B3 for a round over.
Details For trimming and profiling timber man-made board. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.|PTFE coated, indicated by distinctive black colouring.|Can be used on hardwood & softwood, fibreboard, plywood and particle board.|Etched dimensions on extra long 40mm shanks, for quick identification.
Details An accurate and easy to use Dovetail Jig for a variety of elegant dovetail joints. |Cuts 12.7mm (1/2 inch) wide half blind dovetails or rebated dovetails in one operation. |Precision made laser cut zinc plated steel template with packing piece. |A Unibase and fine height adjuster may be required for certain makes of router. |A range of accessory templates are available for box joint, dowel and through dovetails.
Details Trend biscuits are made of die cut beech. Beechwood biscuits whih expand when in contact with a woodworking adhesive such as PVA glue. They are ideal for strong, fast, and accurate jointing of hard and soft woods, plywood and composition board. Compared to doweling, biscuit jointing is faster and more precise.
Details Recessing cutter will accommodate the Schlegel Aquamac 21 seal. The cutter is designed for use with the Aquamac seal in a wiping mode and comes complete with a guide bearing to reduce setting-up time and simplify machining operations.|MEC mechanical feed only.
Details Enables the cutting out of letterbox openings to be carried out quickly and accurately. The size-adjusting jig ensures that template openings are always cut exactly square. Made from cast aluminium and machined to a high standard. Simple to set up and use. Requires 1/2inch diameter x 50mm cut length cutter. Unibase may be required for certain makes and models of router.
Some Ovolo cutters can be used with radius cutters, to make rule joints. Ref. 7/01 has an extra long shank of 40mm.
Bosch GSB1600RE 1-Speed Impact Drill, complete with keyless chuck, auxiliary handle, depth stop and carrying case.
Details D26500K-LX, TCT reversible blades, parallel fence, rebate depth guide, dust extraction spout, deflector and chip container. Rebating depth 0-26mm Weight 4kg 110V version includes plug 1050W Left/Right Chip Ejection 3 Chamfer Grooves Parallel & Rebating Fence Park Rest Soft Start Lock-On Switch Dust Ejection Facility
Details Replacement collet.|Does not include the collet nut.|To fit the following machines:-Hitachi M8, M8V
Details Produces an elegant edge mould, or a shallow panel effect when routing on its full width.
Details Guide bush guides the router when using a template. |Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. |Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base.
This quarter radius can produce a sunk bead or a nosing mould. The bearing eases setting up & enables curved edges to be profiled.
Details Profiler with shank mounted bearing guides.|For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be left before trimming. Refs. 46/910 and 46/91 have a shorter cutter length for use on thin boards. They are ideal for template making.
Details Standard duty arbor with 1/4 inch spindle and spacers. |Enables mounting of 1/4 inch bore slotters with and without bearings in a variety of positions. |Use shims/spacers to prevent bearings with larger diameters, touching the tips of the slotters and also for accurate spacing.
Details This fine height adjuster simply fits onto the router and allows fine adjustment of the cutter height. They are especially useful for accurate work such as when the router is held inverted in a router table. |Suitable for the following|TREND T9|METABO OF1612, OFE1812|FELISATTI TP246(E), R346EC|CMT CMT2E|FEIN RT1800
Details These specially designed machine bits have a specially designed form of scriber to allow use at high speeds. For recessing circular hinges. For accurate repetitive routing, a template and guide bush fitted to the router base should be used.
Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding. The smaller bearing gives a 3.2mm quirk.
By making a second base at 90 degrees a full corner bead can be cut out. A side fence is needed for guidance.
Details Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.
Details Made from UHMW plastic. User must drill plate to fix circular saw.|Clamp Guide not included.
Details Trend biscuits are made of die cut beech. Beechwood biscuits whih expand when in contact with a woodworking adhesive such as PVA glue. They are ideal for strong, fast, and accurate jointing of hard and soft woods, plywood and composition board. Compared to doweling, biscuit jointing is faster and more precise.
Details Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.
Cuts cleanly without feather edging. |Solid Carbide for long life. Cuts to a fine ' V' groove point. Ideal for sign writing.
Details Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece.
The guide pin follows the work edge to give a preset width of rebate. Ref. 8D/4 can be used to create a counterbore for a slot to accept M5 and M6 pan head screws.
Details Refs. 332 and 332 are designed to accomodate Schlegel Smokeseal and Quick Fit brush strips. The groove is cut in the door edge rather than the frame.|Ref. 332 has no bearing guide.|Ref. 333 comes complete with a guide bearing to reduce setting-up time.|MEC mechanical feed only.
Details These will give added grip on harder and smoother surfaces than the normal jaws.
Quick Overview Specification Rated power input 650 W No-load stroke rate 500 - 3.100 spm Power output 360 W Weight without cable 2,3 kg Cable length 2,5 M Stroke height 23 mm Cutting depth in wood 90 mm Cutting depth in aluminium 20 mm Cutting depth in non-alloyed steel 10 mm Functions Pendulum stroke adjustment Dust extraction Bosch SDS System Electronic Saw blade pendulum action Standard Equipment Saw blade Allen key KW 5 (ET no. 1 907 950 006) Carrying case (2 605 438 614)
An adjustable stop with fine adjustment screw to limit sliding movement of plates.|Clamp Guide not and plate not included.
Details Aquamac 21 strip is fitted into the door frame rebate (head and jambs) as three cut pieces forming a compression or wiping seal. |The seal is butt joined at the corners. |To seal the door bottom, Schlegel weather bar is mounted into the threshold section. |It is important that the seal does not abut the weather bar but runs to the threshold section in front (weatherside) of it, to maximise water permeability resistance.
Quick Overview DeWalt DW625EKL Router 110v Electronic Speed Control Ensures That The Same Fine Finish Is Achieved In All Grades Of Timber, Aluminium And Plastics Since The Full Wave Electronic Control Ensures The Selected Speed In Maintained Under Any Load. Soft Start To Eliminate Small Initial Movements That Might Misalign The Cutter, Especially Important With Such A Powerful Router.
Details Clear plastic template for use with any plunge router to accurately fit three sizes of letter box plates. Made from 8mm thick clear plastic.|Use on wooden doors up to 50mm thick. Use with 1/2inch collet plunge router. Requires 12mm cutter and 30mm guide bush. A Unibase may be required for certain makes and models of router.|Router not included.
Details Enables external and internal angles to be read direct from a scale.|Divides top angle in two without changing the setting.|Ideal for measuring angles when mitre cutting large boards, fillets and architraves.
Details The P2 electrostatic filter has approximately life of ten times that of average disposable facemask. Protects the user against hazardous toxic dust particles, metal fumes and mist to classification P2 and down to 0.3 microns enabling use with MDF.
Details A powerful wet and dry auto-start extractor with many useful features. |Powerful but quiet 1200 watt bypass motor. |Power tool take off with auto start feature and 6 second run-on delay. | Large 34 litre capacity impact resistant plastic container with five castors for stability.|Extra long 7.8 metre power cable. |Extra long five metre hose.|Includes fine dust filter kit comprising 0.3 micron micro cartridge filter for increased effectiveness against fine dust particles and nylon wet & dry...
