downlightsdirect.co.uk

Is this your shop? Control your presence on Shopwiki by opening a free account on Merchant Fusion!
Sample Offers
Fire Tent 650x600x150MM Basic fire tent for downlights. Dimensions: 650x600x150mm Length x Width x Height. Recommended clearance size of downlights are 40mm horizontal and 15mm vertical. Tested for 60 minute fire protection. Product code: AFT/2
Insulation Coverable Downlights Part L of the Building Regulations (energy efficiency) now states that you should lay continuous insulation over a ceiling space. Insulation functions like a jacket for a room or building and traps in the warm air. Without using insulation correctly, warm air will escape through the ceiling space. This wastes energy and costs you more on your energy bills.When recessed downlights are installed, holes must be cut into the ceiling to mount them in. Not only do these...
Brass: ADI28BZ/BR. Chrome: ADI28BZ/CH. Silver Grey: ADI28BZ/SG.
Ansell Aspen LED Linklight Ansell intorduces its new energy efficient Aspen LED link lights which range from 321mm to 1183mm in length. The output of the Aspen LED linklights far exceed T5 fluorescent equivalent, also come with intergral driver, switch and fixed diffuser. A maximum of 12 fittings can be linked up. General Specification Voltage: 240V Wattage: 6W - 22W Lamp Type: LED Colour Temperature: 4000K Dimmable: No Life Expectancy: 40,000 hours IP Rating: IP20
Description: Economy 7W GX53 lamp. Choose colour temperature below. Wattage: 7W equivalent brightness to a 30W halogen. Cap / base: GX53. Life expectancy: 8,000 hours. Colour temperature: Available in warm white 3000K or cool white 4000K, choose below. Voltage: Mains voltage no additional transformers required. Colour rendering index: 82 CRI. Beam angle: 106 degree. Diameter: 74mm. Depth: 24mm. Use with: GX53 light fittings. Start up time: CFLs take time to warm up, can be between 40 to...
Voltage: 240V. Wattage: 70W. Lamp Type: PL-T. Material: Poly-carbonate. Injection molded high resistant thermoplastic housing. Injection molded poly-carbonate opal diffuser retained by stainless steel screws. IP Rating: IP66. Manufacturer: Ansell Lighting.
The market leading Lutron Grafik Eye QS control panel is available in 3, 4 or 6 zone options and is the all in one home automated lighting solution. Each panel can control up to 6 zones of lighting, if more zones are required then multiple panels can be added and linked to the system.The Grafik Eye QS has a built in RF (radio frequency) input and output allowing it to wirelessly communicate with blinds and many other Lutron add-ons such as occupancy and daylight sensors. When used with the additional...
Installation sleeve for use as shuttering/formwork. For use with GL019 & GL019 SQ. Colour: Anodised black. Use under slabs to retain Soil//Sand. Manufacturer: Collingwood Lighting.
Twister Cable Connector Starter Kit Basic cable connector kit including 4 different types of connector to get you started. Comes in a plastic storage container so ideal for the toolbox etc. Starter Kit Includes: 30x 30-340 Blue Twister Cable Connector 0.5mm - 4mm 32 amp 30x 30-341 Grey Twister Cable Connector 0.5mm - 6mm 41 Amp 15x 30-144 Red & Yellow Twister Cable Connector PRO 0.5mm - 4mm 32 amp 15x 30-162 Blue Twister Weatherproof Cable Connector 1.5mm - 4mm 32 Amp Product code: 30-5001EU
Voltage: 240V. Wattage: 75W MAX [Black Version 100W MAX]. Finish: Available in Black, Stainless Steel and Wood Effect. Height: Choice of height from 450mm, 750mm or 1000mm. Lamp Types: E27 Edision Screw. Die-cast extruded aluminium with external louvered head [Black Version Only]. High Grade AISL Stainless Steel with Louvred head and opal poly-carbonate diffuser [Stainless steel & Wood Effect Only]. Suitable for commercial and domestic applications. IP Rating: IP44. Warranty: 5 Years. Manufacturer...
ARMK1: Ansell Ibis Root Mounting Kit. ARMK2: Ansell Neway Root Mounting Kit. ARMK3: Ansell Monza & Aquila Root Mounting Kit. ARMK5: Ansell Augusta Root Mounting Kit. ARMK6: Ansell Morphis Root Mounting Kit. ARMK7: Ansell Lampara Root Mounting Kit. ARMK8: Ansell Casa Root Mounting Kit. ARMK9: Ansell Oko Root Mounting Kit.
ADLC/0 - 150x120mm. ADLC/1 - 130x70mm. ADLC2 - 130x100mm. ADLC3 - 130x140mm. ADLC4 - 180x130mm. ADLC5 - 180x170mm. ADLC6 - 260x120mm. ADLC7 - 260x230mm. ADLC8 - 300x170mm. ADLC9 - 350x230mm.
Voltage: 240V. Wattage: 70W MAX. Finish: Available in Black, Stainless Steel and Wood Effect. Height: Choice of height 750mm or 1000mm. Lamp Types: SONE / HQI-E. Die-cast extruded aluminium with external louvered head [Black Version Only]. High Grade AISL Stainless Steel with Louvred head and opal poly-carbonate diffuser [Stainless Steel & Wood Effect Only]. Suitable for commercial and domestic applications. IP Rating: IP44. Warranty: 5 Years. Manufacturer: Ansell Lighting.
Voltage: 240V. Wattage: 75W MAX. Finish: Available in Black, Stainless Steel and Wood Effect. Height: Choice of height from 450mm, 750mm or 1000mm. Lamp Types: E27 Edision Screw. Die-cast aluminium bollard with four pillars and opal poly-carbonate diffuser. High Grade AISL Stainless Steel and opal poly-carbonate diffuser [Stainless steel & Wood Effect Only]. Suitable for commercial and domestic applications. IP Rating: IP44. Warranty: 5 Years. Manufacturer: Ansell Lighting.
Input: 12V DC. Wattage: 4.5W. Lumens: Cool White: 205lm Warm White: 185lm. Lumens Per Watt: 45.5lm/w. Colour Temperature: Available in Cool White 5500K and Warm White 3000K. Life Expectancy: 40,000 Hours. Length: 300mm. Width: 20mm. Depth:12mm. Product Code: AAXLED/30/** Cool White: AAXLED/30/CW Warm White: AALED/30/WW.
Position: Fixed position. Material: Die cast aluminium. Finish: Choose from three different finishes:- Matt white- Polished chrome- Satin chrome. Voltage: Optional, supplied with both mains voltage GU10 and MR16 low voltage lamp holders. Wattage: Max 50W. Lamps must be ordered separately or added from the product options. Aurora Sola downlights comply with Building Regulations; Part B (fire safety), Part C (moisture protection), Part E (acoustics). They also comply with Part L (energy efficiency...
Wattage: 18W. Voltage: 240V. Cap Type: PL-C. Finish: Available in Silver or Graphite. Height: Optional height of 500mm, 750mm and 1000mm. Supplied without lamp. Body in die-cast and extruded aluminium. Moden styled bollard for commercial and domestic applications. High Frequency. IP Rating: IP55. Warranty: 5 Years. Manufacturer: Ansell Lighting.
Corner aluminium profile rails for use with LED strips. Provides added protection and a more elegant finish to LED lighting strips. These aluminium rails form part of our bespoke LED strip design service, please contact us for further information. Suitable for use with all LED Strip Fit and other LED tapes which are 10mm wide. End caps and mounting brackets supplied. Two mounting brackets per length. With opal covers. Dimensions (external) - Height: 18mm (including cover). - Width: 18mm. ...
Description: LED GX53 lamp blue. Wattage: 2.7W equivalent brightness to a 30W halogen or comparable to a 7W fluorescent. Cap / base: GX553. Life expectancy: 20,000 hours. Colour temperature: N/A Blue in appearance. Voltage: Mains voltage. Colour rendering index: N/A. Beam angle: 120 degree. Diameter: 75mm. Height: 28mm. Use with: GX53 light fittings. Ideal for garden lighting. Start up time: Instant. Manufacturer: Fumagalli / Click Scolmore. Product code: LA620BL. Dimmable: No. Energy...
Wattage: 5W (450mm) / 18W (750 - 1000m). Voltage: 240V. Lamp Type: LED. Finish: Available in Silver or Graphite. Height: Optional height of 450mm, 750mm and 1000mm. Lumens 5W: 430lm. Lumens 10W: 910lm. Colour Temperature: 5000K Daylight. Modern styled bollard with body in die-cast and extruded aluminium. White reflector with clear poly carbonate diffuser. Life expectancy: 40,000 hours average lifetime. Non Dimmable. IP Rating: IP65. Warranty: 5 Years. Manufacturer: Ansell Lighting.
Pull apart flow connector with secure click in fastener and cord grip. Speeds up downlight installations and makes maintenance work much easier. By wiring the male plug to a downlight you can create plug-in downlights. Male end accepts one 1.5mm cable or smaller. The female socket works like a junction box taking up to three 2.5mm twin and earth type cables or smaller. Female connector has live, earth, neutral and loop terminals. Flow connectors can be wired back to a hub see CT300. This helps...
Revolutionary Cable connector! Just twist and connect your cables together. Pre-filled with silicone sealant to protect against corrosion and moisture. IP 55 Rated: Can be used outdoors. Easy to use, connect your cable in seconds!. Guaranteed safe connection between two cables. Small size enables it to be used in compact spaces. No need for insulation tape. Cheaper, safer and easier to use than terminal blocks. Would be ideal to use with a Choc Box. UL 94V-2 flame-retardant shell rated at...
Revolutionary Cable connector! Just twist and connect your cables together. SureGrip over molding provides better grip for improved leverage and more torque. Expanding square-wire spring provides a secure connection every time. Small size enables it to be used in compact spaces. No need for insulation tape. Cheaper, safer and easier to use than terminal blocks. Would be ideal to use with a Choc Box. UL 94V-2 flame-retardant shell rated at 105°C. Can be used with either solid or stranded cable...
Aluminium profile rails for use with LED strips. Provides added protection and a more elegant finish to LED lighting strips. These aluminium rails form part of our bespoke LED strip design service, please contact us for further information. Suitable for use with all LED Strip Fit and other LED tapes which are 10mm wide. End caps and mounting brackets supplied. Two mounting brackets every metre. Available with opal covers only. Dimensions (external) - Height: 9mm (including cover). - 7mm without...
Surface mount aluminium profile rail for use with LED lighting strips. Adds protection and an improved finish to your LED strip light installation. We can supply the profile rails with LEDs pre-fitted or in component form. Pre-fitted rails cost £4 extra and require additional LED strips. Please contact us for further information on 01706 521188 or email sales@downlightsdirect.co.uk.Specification Aluminium profile rails for use with LED strips. Provides added protection and a more elegant finish to...
Smart drive for use with Visio controllers and dimmer switches. Suitable for use with single colour and RGB LED strips among many other types of LED lights. Dimmable constant voltage LED driver. Maximum output: 10A total or 5A per channel. Programmable controlling protocols: DMX, 0-10V or DALI. Input voltage: 12-24V DC Requires an additional power supply. Dimensions: 210x51x33mm (LxWxD). Product code: SDV-480 Instruction Manual Below
Voltage: 240V. Wattage: 70W MAX. Finish: Available in Black, Stainless Steel and Wood Effect. Height: Choice of height 750mm or 1000mm. Lamp Types: SONE / HQI-E. Die-cast aluminium bollard with four pillars and opal poly-carbonate diffuser. High Grade AISL Stainless Steel and opal poly-carbonate diffuser [Stainless steel & Wood Effect Only]. Suitable for commercial and domestic applications. IP Rating: IP44. Warranty: 5 Years. Manufacturer: Ansell Lighting.
Constant current LED driver. 700ma. Suitable for use with 1-3W LED fittings. Must be wired in series only. Height: 21mm. Width: 26.5mm. Depth: 52mm.
Link-able LED aluminium rail light. Colour temperatures: Available in Warm White 3000K, Cool White 4000K and RGB. Total LEDs: 60 LED’s per metre. Life expectancy 50,000 hours. Beam Angle: 120 degrees. Lumen: 960lm per metre. Voltage: 12V DC. Wattage: 14.4W per metre. Working Temperature: -25°C- +40°C. IP Rating: IP67. Approvals: CE, RoHS, FCC. Product codes: - Cool White: LEDSTAP260CW/*.*M - Warm White: LEDSTAP260WW/*.*M - RGB: LEDSTAP260RGB/*.*M.
Wattage: 3W. Voltage: 12V. Lamp Type: COB LED. Driver Wattage: 15W. Lumens: Cool White / 280lm - Warm White / 260lm. Available in Warm White 3000K or Cool White 4000K. Choice of finish from Stainless Steel to Aluminium. Cable Length: 1.5m. Plug type: JB. Also available to order individually on request and with surface mounting rings. Manufacturer: Leyton Lighting.
Twin Brown Cable 1.5mm 6242Y General cable for wiring of lighting circuits. Cable size 1.5mm square. Current rating: 18 amps. Grey outer sheath with new harmonised core colours: 2x insulated brown cores and 1x uninsulated earth core. BASEC approved. Product code: 6242Y1.5BB.
Wattage: 0.24W per LED light. Voltage: 12V DC constant voltage. Light Source: LED. LED Chip: 1pc Epistar SMD3528. Life expectancy: 50,000 hours. CRI (Ra>): 80. Colour Temperature: 3000K Warm White or 4000K Cool White. Working Temperature (℃): -10 - +65. Material: Aluminium. Certification: CE & RoHS Certified. Max. Walk over weight: 100 kg. Connection: Has a male IP67 connector which can be connected directly into the driver or into a connecting cable (Sold Seperately).
Add-on LED Marker Light for the SC-B109A6KIT.This Black Stainless Steel LED Marker Light is made from zinc alloy die cast material and covered with a water tight silica gel. It's rated at IP67 allowing it to be fully water and dust resistant, only using a minimum power of 0.3W it's an ideal use as indoor marker lights or outdoor decking lights. ApplicationsColour changing plinth lighting Decking lighting Floor or ground lighting, suitable for indoor and outdoor use. Ideal for homes including kitchens...
Twin & Earth Cable 1.0mm 6242Y General cable for wiring of lighting circuits. Cable size 1.0mm square. Current rating: 14 amps. Grey outer sheath with new harmonised core colours: 1x insulated brown core, 1x insulated blue core and 1x uninsulated earth core. BASEC approved. Product code: 6242Y1.0.
Distribution hub for Click flow connectors. 4 way junction block enables 1 input connection and 3 out connections. With mounting holes allowing you to screw it securely onto a surface. Speeds up downlight installations and makes maintenance work much easier. Can connect multiple hubs together to create a lighting distribution block. Instead of wiring up multiple terminal blocks simply plug downlights into each using the connectors and hub. The CT300C hub can be used with both 3 pin and 4 pin...
Twin & Earth Cable 4.0mm 6242Y General cable for wiring of electrical circuits. Cable size 4.0mm square. Current rating: 32 amps. Grey outer sheath with new harmonised core colours: 1x insulated brown core, 1x insulated blue core and 1x uninsulated earth core. BASEC approved. Product code: 6242Y4.0.
Wattage: 8.5W / Comparable to a 50W GU10 halogen with 85% energy savings. Life expectancy: 70,000 hours or 30+ years if used for 6 hours per day. Colour temperature options: Warm white 3000K / cool white (also known as neutral white) 4000K. Voltage: 100-240V via LED driver supplied with each downlight. Dimmable: Yes, dimmable as standard. LED driver included: Yes, this comes as a complete fitting and includes a built in LED module. Fire rated: Yes, tested for 30,60 and 90 minute ceilings. ...
Twin & Earth Cable 16.0mm 6242Y General cable for wiring of electrical circuits such as high powered showers. Cable size 16mm square. Current rating: 70 amps. Grey outer sheath with new harmonised core colours: 1x insulated brown core, 1x insulated blue core and 1x uninsulated earth core. BASEC approved. Product code: 6242Y16.0.
Downlight type: Choose from fixed position, adjustable or IP65 for bathrooms. Material: Die cast aluminium with ultra slim bezel. Finishes: Choose from seven different finishes: - Antique brass- Brass- Black chrome- Matt white- Polished chrome- Satin chrome- White (glossy). Voltage: Optional, supplied with both mains voltage GU10 and MR16 low voltage lamp holders. When using GU10 lamps, no additional drivers or transformers are required. Wattage: Max 50W. Lamps must be ordered separately or...
Voltage: 240V. Wattage: 18W MAX. Finish: Available in Black, Stainless Steel and Wood Effect. Height: Choice of height from 450mm, 750mm or 1000mm. Lamp Types: PL-C. Die-cast extruded aluminium with external louvered head [Black Version Only]. High Grade AISL Stainless Steel with Louvred head and opal poly-carbonate diffuser [Stainless Steel & Wood Effect Only]. Suitable for commercial and domestic applications. IP Rating: IP44. Warranty: 5 Years. Manufacturer: Ansell Lighting.
Voltage: 240V. Wattage: 18W MAX. Finish: Available in Black, Stainless Steel and Wood Effect. Height: Choice of height from 450mm, 750mm or 1000mm. Lamp Types: PL-C. Die-cast aluminium bollard with four pillars and opal poly-carbonate diffuser. High Grade AISL Stainless Steel and opal poly-carbonate diffuser [Stainless steel & Wood Effect Only]. Suitable for commercial and domestic applications. IP Rating: IP44. Warranty: 5 Years. Manufacturer: Ansell Lighting.
Wattage: 18W. Voltage: 240V. Lamp Type: PL-C. Finish: Available in Silver or Graphite. Height: Optional height of 450mm, 750mm and 1000mm. High Frequency. Modern styled bollard suitable for commercial and domestic applications. Body in die-cast aluminium. White louvre with clear poly-carbonate diffuser. IP Rating: IP65. Warranty: 5 Years. Manufacturer: Ansell Lighting.
Wattage: 0.24W per LED light. Voltage: 12V DC constant voltage. Light Source: LED. LED Chip: 1pc Epistar SMD3528. Life expectancy: 50,000 hours. CRI (Ra>): 80. Colour Temperature: 3000K Warm White or 4000K Cool White. Working Temperature (℃): -10 - +65. Material: Aluminium. Certification: CE & RoHS Certified. Max. Walk over weight: 100 kg. Connection: Has a male IP67 connector which can be connected directly into the driver or into a connecting cable.
Lutron Rania dimmer switch which is suitable for use with halogen and incandescent lighting loads. It can be used with LEDs such as the EcoLED ZEP1 and some GU10 LEDs but only when used with an additional resistive load see RESLOADE. Specification Has both trailing edge and leading edge dimming capabilities - select-able from the advanced settings. Programmable dimmer switch allows fade on and off time range to be adjusted. Allows high end and low end trimming. Maximum wattage: 450W Minimum wattage...
Wattage: 3W. Voltage: 240V. Lamp Type: LED. Lumens 80lm. Colour Temperature: Cool White 4000K. IP Rating: IP65. Material: Die Cast Aluminium/Poly-carbonate Diffuser. Life Expectancy: 40,000 hours. Dimmable: No. Supplied with Integral driver. Manufacturer: Ansell Lighting.
Wattage: 7.9W / Comparable to a 50W GU10 halogen with 85% energy savings. Life expectancy: 70,000 hours or 30+ years if used for 6 hours per day. Colour temperature options: Warm white 3000K / cool white (also known as neutral white) 4000K. Voltage: 100-240V via LED driver supplied with each downlight. The compact version is non dimmable. See H2 Pro for dimmable version. LED driver included: Yes, this comes as a complete fitting and includes a built in LED module. Fire rated: Yes, tested for...
Voltage: 220V ~ 240VAC. Frequency: 50 -60Hz. Power Factor: 0.95. Output Voltage: 15~52V. Output Current: 350mA. Output Power: 18W. Dimmable: Yes. Overload protection 100~135% rated output. Thermal shutdown protection. Manufacturer: Sunpower. Product code: PCC35018TD.
Fluorescent fitting adaptor for upgrading outdated and inefficient T12s into energy efficient T5s. Specification Quickly transforms your existing 8FT 100W or 125W batten fitting into a new modern energy efficient T5 2x28W. T5s are instant start up. Will no longer flicker when switched on. 8FT Energy saving adaptor. No extra ballasts or external wiring required. Saves having to rewire and install new fittings. Quick payback time within 6 to 12 months. Reduce your carbon emissions. Carbon trust...
Input voltage: Mains voltage 90-264V AC. Output voltage: Choose between 12V and 24V DC. Constant voltage, suitable for use with LED tape. Wattage: 60W max. Current ratings: - 12V 5 amps - 24V 2.5 amps. Suitable for use with LED strips and other constant voltage LED lighting installations. This power supply is ideal for use under kitchen cabinets as it has mounting holes and can be screwed directly to the cabinets. Water and dust resistant to IP67. Guarantee: 3 years. Manufacturer: Mean Well...
This kit has 6 Micro Dot Marker Lights which have a Brushed Chrome finish with colour temperatures available in 4000K Cool White and 3000K Warm White. A 240V AC to 12V DC LED driver is also provided in the kit.There is 2m of cable between each unit, and 2.5m of cable between the plug-in driver unit and the first fitting.Additional Square Marker lights can be added onto the kit via the Related Products. Voltage: 12 V / 240 V driver supplied.Wattage: 0.25W per fitting.Marker Lights In Pack: 6Maximum...
Decking Uplights. LED Bollards. LED Downlights. Outdoor Downlights. Spotlights. Wall Lanterns.
Lutron Rania 2 gang dimmer switch which is suitable for use with halogen and incandescent lighting loads. It can be used with LEDs such as the EcoLED ZEP1 and some GU10 LEDs but only when used with an additional resistive load see RESLOADE.SpecificationHas both trailing edge and leading edge dimming capabilities - select-able from the advanced settings. Programmable dimmer switch allows fade on and off time range to be adjusted. Allows high end and low end trimming. Maximum wattage: 2x250W Minimum...
Description: Xenon long life 12V MR16 reflector lamp / dichroic bulb. Wattage: 20W. Life expectancy: 8,000 hours lasts 4x longer than most halogens. Voltage: Low voltage 12V (transformer required see PRO60). Diameter: 51mm. Length: 50mm. Manufacturer: Kosnic. Colour: 830 Warm white / 3000K also available in cool white on request. Cap / base: GU5.3 / G5.3. Dimmable: Yes, only when used with a dimmable transformer. Product code: KXN20MR16/G5.3-ALU ( replaces GE M269/BAB/CG/EC / 38006 / M...
Wattage: 4W comparable to a 20W halogen. Voltage: 12V AC. Cap / base: GU4 / MR11. Colour rendering index: 80 CRI. Dimmable: No. Beam angle: 36 degrees. Colour temperatures: 2800K Extra warm white or 4000K cool white. Lumen: 230 lm. Manufacturer: Megaman. Energy efficiency rating: A. Life expectancy: - (L90) 25,000 hours - (L70) 50,000 hours.
Wattage: 10W comparable to a 50W halogen. Voltage: 12V AC. Cap / base: GU5.3 / MR16. Colour rendering index: 80 CRI. Dimmable: Yes. Beam angles: 36 degrees. Colour temperatures: 2700K or 3000K. Special offer on 3000K 36 degree. Lumen: 470 to 495 lm. Manufacturer: Philips. Energy efficiency rating: A. Guarantee: 5 years. Life expectancy: 30,000 hours.
This fantastic kit contains 6 black marker lights in a 4000K Cool White colour temperature, producing only a mere minimum of 0.3W per fitting it's also completely plug & play. LED Driver and waterproof wiring cables available with kit.The LED fittings are made of a strong zinc alloy and are covered by silica gel, allowing them to be fully water and dust resistant for outdoor and indoor applicationsAdditionally more lights can be added on to this package via the Related Products, with a maximum of...
Wattage: 6W, comparable light output to a 50W GU10 halogen but with 86% energy savings. Available finishes: Matt white, polished chrome and stainless steel. Choose from the product options. Life expectancy: 50,000 hours or 22 years if used for 6 hours per day. Colour temperatures: - Extra warm white 2700K - Warm white 3000K - Cool white 5600K - Special offer on cool white. Voltage: Mains 240V via the LED driver which is supplied with the downlight. Dimmable with leading edge or trailing edge...
Wattage: 35W. Equivalent to: 56W. Voltage: 12V. Bulb type: LED. Beam angle: 36 Degree. Colour Temperature: 3000K Warm White. Lumens: 640lm. Dimmable: Yes. Start Time: Instant. Energy Effiency Level: B. Diameter: 51mm. Overall Length: 46mm. Product Code: 18140.
Constant voltage DMX LED driver. Constant current version also available. Suitable for use with single colour and RGB LED strips amongst many other types of LED lights. DMX512 compliant control interface with digital, select able display. Three channel or four channel output select-able. Maximum output current: 5A per channel. Maximum wattage: - 12V supply 60W per channel, 180W for 3 channel (RGB). - 24V supply 120W per channel, 360W for 3 channel (RGB). Input voltage: 12-36V DC. Requires...
Wattage: 10 watt / Comparable brightness to a 50 watt halogen. Voltage: Mains 240V, no other items are required. Cap / base: N/A The LED is integrated into the downlight. Can be covered with thermal insulation but requires an additional cover cap: AU-ICC72. Position: Adjustable, with cheaper fixed version also available. IP Rating: IP20. Material: Die cast aluminium bezel. Finish: Available in matt white, polished chrome and satin nickel. Choose from the product options. Colour temperatures...
Input voltage: Mains voltage 90-264V AC. Output voltage: Choose between 12V and 24V DC. Constant voltage, suitable for use with LED tape. Wattage: 100W max. Current ratings: - 12V 8.5 amps - 24V 4.2 amps. Suitable for use with LED strips and other constant voltage LED lighting installations. This power supply is ideal for use under kitchen cabinets as it has mounting holes and can be screwed directly to the cabinets. Water and dust resistant to IP67. Guarantee: 3 years. Manufacturer: Mean...
Allows specific downlights to be covered by thermal insulation. Can be used with the Aurora M10 DOB LED downlight and more!
Description: Ravello table lamp. Wattage: E27 1 x 60W Max. Colour: Bronze. Light source / cap type: E27 1 x 60W Max. Lamp must be ordered separately. IP Rating: IP20. Height: 560mm. Width: 250mm. Availability: Usually 2-3 days. Manufacturer: Astro Lighting. Product Code: 4542.
Wattage: 13W. Halogen Equivelant: 60W. Colour Temperature: Available in Warm White and Cool White. Usage: GX53 Downlights or GX53 under cabinet fittings. Integrated ballast. Lumen: 520 lm. Lumen per watt: 40 Part L approved. CRI: 82. Beam angle: 117°. Life expectancy: 15,000 hours. Dimensions: 75mm diameter x 37mm deep. Product code: 7102** Warm White GX53: 710232 Cool White GX53: 710249.
This kit has 3 Micro Dot Marker Lights which have a Brushed Chrome finish with colour temperatures available in 4000K Cool White and 3000K Warm White. A 240V AC to 12V DC LED driver is also provided in the kit.There is 2m of cable between each unit, and 2.5m of cable between the plug-in driver unit and the first fitting.Additional Square Marker lights can be added onto the kit via the Related Products. Voltage: 12 V / 240 V driver supplied.Wattage: 0.25W per fitting.Marker Lights In Pack: 3Maximum...
Modern indoor low energy wall light suitable for bathroom use. Supplied with 2x11W E14 compact fluorescent lamp. The lamp provides a warm white light 2700K. Mains voltage. Rated at IP44. Finish: Chrome with a frosted glass. Dimensions: 460x66x94mm LxWxD. Manufacturer: Click Scolmore. Product code: LE612CH11W.
1 way or 2 way operation. Allows dimming from 1 side of the room and switching from another. If 2 way dimming is required then see the Varilight Eclique range were a master and slave touch dimmer combination can be used. Control knob has push on / off function. With soft start and automatic overload protection. Contains trailing edge V-Pro dimming technology which can reprogrammed to leading edge mode. Smoother, silent dimming operation, no buzzing. Dimming module only used for retrofitting...
Allows colour changing and dimming of RGB LED strips from a further distance than IR. Touch operated remote control allows a wide range of colours to be selected. Works with 12V and 24V LED strips. Range: Up to 20 metres. Supplied with a remote control and RF receiver. Operates on 434MHz/868MHz. Allows colour changing, dimming and adjusting of speed settings for flashing or strobe effects. Max wattage: - 108W for 12V DC supply or - 216W for 24V DC supply. Guarantee: 3 years. Product code...
Voltage: 240V. Wattage: 2 x 50W. Lamp Type: GU10. Bi-directional wall light with housing in die-cast aluminium with a textured paint finish. Larger diameter housing to provide heat dissipation. Suitable with retrofit GU10 LED's. Available in Black or Silver Grey finish. Life Expectancy: 50,000 hours. IP Rating: IP65. Manufacturer: Ansell Lighting.
Lyric Single Recessed GU10 DownlightRecessed display downlight adjustable on two axes, Suitable for GU10 LED, GU10 halogen and GU10 CFL lamps, Die-cast aluminium construction with brushed satin finish. SpecificationsVoltage: Mains 240VWattage: 50WCap type: GU10Adjustable: YesMaterial: Die-cast aluminiumFinish: Brushed SatinManufacturer: AnsellProduct Code: ALGU10/1
Wattage: 8.5W / Comparable to a 50W GU10 halogen with 84% energy savings. Life expectancy: 70,000 hours or 30+ years if used for 6 hours per day. Colour temperature options: Warm white 3000K or cool white (also known as neutral white) 4000K. Voltage: 100-240v via LED driver supplied with each downlight. Now dimmable as standard but can also be used on non dimming circuits. See MP500 for the Halers recommended dimmer switch or GRID500 for grid version. LED driver included: Yes, this comes as...
Wattage: 20W included. Material: Aluminium. Finish: Black. Adjustable: 90 degrees. Beam Angle: 38 degrees. Requires low voltage transformer here. LUX: 302lx 1m. 3m H05RN-F cable attached. IP Rating: IP65. Manufacturer: Collingwood Lighting.
Wattage: 4W comparable to a 35W halogen. Voltage: Mains 230/240V. Cap / base: GU10. Colour rendering index: 80 CRI. Dimmable down to 10%. Recommended dimmer switch: JQP401W up to 12x Philips 6W GU10s can be dimmed using this dimmer switch. Beam angles: Choose between 25 or 40 degrees. Colour temperatures: 2700K, 3000K or 4000K. Lumen: 235 to 260 lm. Manufacturer: Philips. Energy efficiency rating: A+. Guarantee: 5 years. Life expectancy: 40,000 hours.
Varilight Eclique slave dimmer switches must be used with the Eclique master and will not work on their own. Slaves allow 2 way or even 3 way dimming. This means you could dim the same light from multiple locations. Simply install a standard Eclique master dimmer switch then add an Eclique slave to the circuit. For 3 way dimming just add another slave.SpecificationAvailable in 1, 2, 3 or 4 gang options.1 way or 2 way operation. For 2 way dimming add a slave dimmer.With soft start and automatic overload...
Installation sleeve for use as shuttering/formwork. For use with GL016 Range and GL021 & GL022. Colour: Anodised black. Use under slabs to retain Soil//Sand. Manufacturer: Collingwood Lighting.
Downlights A downlight or downlighter is a luminaire (light fitting) that emits light in a downward direction with an accurate but relatively narrow beam angle. The beam of light is focused and intense, providing an unparalleled, clear, bright lighting effect to the area or objects directly beneath them. The main problem associated with them is that you need to install a large amount of them to illuminate a room effectively. Recessed downlights have become very popular over the last twnety years...
Voltage: 12V DC (LED driver required). Wattage: 12W. Requires an additional LED controller for colour changing. Common anode 5 core cable connection, suitable for use with a wide variety of LED lighting controllers and DMX drivers. Material: Aluminium housing. Low profile design at just 55mm in depth. Wide beam angle: 80 degrees. LED chip type: SMD5630. Lumen: 380lm. RGB+WW colour changing allows you to change colours ranging from red, green, blue, white or warm white 3000K. Non fire rated...
Position: Choose between fixed, adjustable or bathroom IP65. Material: Die cast aluminium. Voltage: Mains voltage / 240V. No additional transformers required. Wattage: Max 50W. GU10 lamps must be ordered separately or added from the options. Compact housing at 110mm height and 123mm for the bathroom version. Suitable for use in ceilings up to 35mm thick. IP Rating: IP20. Fire rated: Yes, fully fire rated downlight, tested to 30, 60 & 90 minute ceilings. Approved to Building Regulations Parts...
Downlights A downlight or downlighter is a luminaire (light fitting) that emits light in a downward direction with an accurate but relatively narrow beam angle. The beam of light is focused and intense, providing an unparalleled, clear, bright lighting effect to the area or objects directly beneath them. The main problem associated with them is that you need to install a large amount of them to illuminate a room effectively. Recessed downlights have become very popular over the last twnety years...
Plug in power supply / LED driver for use with LED strip lights and other electronic items. Mains voltage 230V input. Supplied with a standard main UK plug. 12V DC output. Constant voltage. Current rating: 10 amp. Wattage: 120W max. Output: Has 2x DC 2.1mm male connector. Ideal for use with longer LED strip runs. Input: Fitted with a standard UK fused mains plug. Will power anything from a few watts to 120 watt. Maximum run for 30 LEDs per metre strip is 16.6 metres. Or 8.3 metres of 60...
Description: Borgo plaster-in / trimless interior wall light. Wattage: 3000K Luxeon 1 x 3W. Colour: White. Light source / cap type: 3000K Luxeon 1 x 3W. LED included. Requires a 700mA constant current driver, not included (see 1271). IP Rating: IP20. Height: 120 - 200mm. Width: 35 - 100mm. Availability: Usually 2-3 days. Manufacturer: Astro Lighting. Product Code: 0976.
If you have limited space available in your ceiling void to mount a standard recessed downlight then check out our range of shallow downlights. Most GU10 style fire rated downlights are at least 110mm deep making them unsuitable for many installations.Most new integrated LED downlights have a much low profile design making them the ideal solution for these applications. The Click Inceptor downlight is just 57mm in depth and the Elan is 60mm. But what if even the most shallowest of downlights aren...
Insulation Coverable Downlights Part L of the Building Regulations (energy efficiency) now states that you should lay continuous insulation over a ceiling space. Insulation functions like a jacket for a room or building and traps in the warm air. Without using insulation correctly, warm air will escape through the ceiling space. This wastes energy and costs you more on your energy bills.When recessed downlights are installed, holes must be cut into the ceiling to mount them in. Not only do these...
Mains voltage, supplied with an LED driver. Wattage: 8W. Requires an additional LED controller for colour changing. Common anode connection, suitable for use with LED strip light controllers and DMX drivers. Material: Die cast aluminium housing. Low profile design at just 18mm deep. Wide beam angle: 120 degrees. Lumen: 380lm. RGB colour changing allows you to change colours ranging from red, green, blue, white and many more. Available in matt white and silver finishes. Non fire rated. ...
What are Fire Rated Downlights? Fire rated downlights help to prevent the spread of fire and minimise the risk of structural damage/collapse. When a recessed downlight is installed, a hole is cut into the ceiling. This hole reduces the ceiling’s natural ability to act as a barrier. Fire rated downlights are used to restore the natural fire integrity of a ceiling. In the event of a fire, the intumescent material in a fire rated downlight melts or swells up and seals off the hole. This prevents the...
Low Energy 3W LED Surface Cube Wall Light Modern indoor low energy cube wall light suitable for bathroom use. Supplied with a 3W LED lamp. The lamp provides a warm white light 2700K. Mains voltage. Finish: Available in White and Black. Dimensions: 98x70x70mm LxWxD Manufacturer: Click Scolmore Product code: LED313WH**
Voltage: 240V. Wattage: Available in 70W or 150W. Lamp Type: RX-7 (HQI-TS). Supplied with lamp. Slim IP65 die-cast floodlight with a textured graphite colour finish. Timed ignitor as standard. Supplied with quality Venture control gear and lamp. Available with an Electronic Photocell. 3 Year Control Gear Warranty. Hinged front cover fitted with tempered safety glass and stainless steel clips for quick and easy access. Assymetric reflector for anti-light pollution. Note 150W Version Is...
Wi-Fi control box which is used to control RGBW LED lamps using an iPhone or smart phone. Provides wireless capabilities and allows you to create your own home lighting network. The App is free to download.SpecificationSignal: Wi-Fi Power: DC/5V 500mA IOS and Android compatible using the Marlight App which is free to download. Product Code: WIFI-CTRLBOX
Water and dust resistant junction box. Dimensions: 150x110x70mm (HxWxD) 6"x4"x3". Smooth walls for easy drilling with hole saws. Halogen free. A budget priced enclosure for a multitude of applications. Screw down, low lid version. Technopolymer grey plastic to RAL7035. Installation temperature +60oc to -25oc. Manufacturer: Gewiss. Product code: GW44206. Approved to IEC60670-1, IEC60670-2 & CEI23-48.
Position: Adjustable position. Allows a 30 degree angle of tilt. Material: Die cast aluminium. Finishes: Available in brushed nickel, polished chrome and white. Please choose from the product options. Voltage: Mains voltage but can be supplied in low voltage on request. Wattage: Max 50W. Lamp not included but can be added from the drop down boxes. Ideal for use with energy efficient LED GU10s. Complies with Building Regulations; Part B (fire safety), Part C (moisture protection), Part E (acoustics...
What are Fire Rated Downlights? Fire rated downlights help to prevent the spread of fire and minimise the risk of structural damage/collapse. When a recessed downlight is installed, a hole is cut into the ceiling. This hole reduces the ceiling’s natural ability to act as a barrier. Fire rated downlights are used to restore the natural fire integrity of a ceiling. In the event of a fire, the intumescent material in a fire rated downlight melts or swells up and seals off the hole. This prevents the...
Miniature LED DownlightsDownlights come in all shapes and sizes, this range is small and some has cut out sizes of around 40mm. To allow for the smallest sizes possible, the LED is integrated into the downlight allowing miniature sizes to be achieved, even smaller than an MR11.They are supplied with or without LED drivers, please check the descriptions. Some of them are dimmable and like with most LEDs, they must be dimmed with a trailing edge dimmer switch such as the Varilight V-Pro range.This...
Wattage: 9W comparable to a 50W halogen. Available finishes: Matt White, Polished Chrome and Satin Nickel. Choose from the product options. Life expectancy: 75,000 hours. Colour temperatures: Warm white 3000K or cool white 4000K. Choose from the product options. Voltage: Mains 240V via built in LED driver. Colour rendering index: 82 CRI. Lumen output and efficacy: - Warm white 420 lm / 47 lm/W - Cool white 430 lm / 48 lm/W. LED driver included: Yes. Dimmable: Optional see product options...
Lutron Lighting & Lutron Grafik Eye If you are searching for a Lutron Grafik Eye lighting system, look no further. We are proud to stock an impressive selection of lighting control options for your perusal. Lutron has been leading the way in automated lighting control systems and began by inventing the world’s first electronic dimmer switch back in 1961. Much has changed since then, most of which in the last few years mainly due to the arrival of LED lighting technology. LED lighting is great for...
Decking Uplights. LED Bollards. LED Downlights. Outdoor Downlights. Spotlights. Wall Lanterns.
Fluorescent 2x26W downlights have long been the number one choice for commercial use. We now have a great range of longer lasting commercial LED downlights that will reduce your energy consumption and maintenance costs. Commercial LED downlights can save you 70% in energy costs and last 3x longer. Recently added to our line up is a commercial surface LED downlight called the Conic from Ansell lighting. This is ideal for use in shallow ceiling voids or for ceilings that cannot be cut into for any...
Ratings and Reviews