www.doorfurnituredirect.co.uk

Sign Concealed CCTV — £7.25
CONCEALED CCTV sign measuring 200 x 300mm. Made from 0.65mm semi-rigid plastic and printed using UV resistant inks for an extended outdoor life. Fully undercoated with a powerful adhesive for immediate lasting contact.

Sign No Smoking — £7.25
NO SMOKING sign measuring 200 x 300mm. Made from 0.65mm semi-rigid plastic and printed using UV resistant inks for an extended outdoor life. Fully undercoated with a powerful adhesive for immediate lasting contact.

Sign First Aid/First Aid Box — £7.25
FIRST AID/FIRST AID BOX sign measuring 200 x 300mm, (each sign measures 300 x 100mm). Made from 0.65mm semi-rigid plastic and printed using UV resistant inks for an extended outdoor life. Fully undercoated with a powerful adhesive for immediate lasting contact.

Chubb Deadlock 5 Lever BS3621 Satin 3G114E — £35.04
This is a Chubb 5 lever deadlock certified to British Standard BS3621. Available in either 67mm (2.1/2in) or 80mm (3in) from the face plate to the back of the lock. Please select from the drop down box below. Supplied complete with satin finish face plate and receiver. Also supplied with both internal and external escutcheons.

Chubb Deadlock 5 Lever BS3621 Brass 3G114E — £34.35
This is a Chubb 5 lever deadlock certified to British Standard BS3621. It measures 67mm (2.1/2in) from the face plate to the back of the lock. Supplied complete with brass finish face plate and receiver. Also supplied with both internal and external escutcheons.

Securefast Sashlock 76mm (3in) 5 Lever BS3621 Stainless Steel — £16.13
This lock can be used on wooden or steel doors, internally or externally. The deadbolt is locked and unlocked by a key from both sides of the sashlock and the latchbolt is retracted by a handle from both sides. The deadbolt is of a low friction design and is thrown 20mm when activated by the key. Sashlocks are pierced to allow bolt through handles to be fitted to the door.

4.5mm HSS-M2 Jobber Drill Bit — £1.17
High speed drill bit especially suitable for use on carbon and alloy steel, plastic, non-ferrous metal and cast iron. Diameter measures 4.5mm. Overall length measures 80mm, drilling length is 45mm.

SAA Toilet Roll Holder — £2.93

Grey Rubber Door Wedge — £1.52
Grey rubber door wedge. Length measures 140mm, width at widest point measures 43mm. Maximum height is approximately 30mm.

Sign Danger Men At Work — £7.25
DANGER MEN AT WORK sign measuring 200 x 300mm. Made from 0.65mm semi-rigid plastic and printed using UV resistant inks for an extended outdoor life. Fully undercoated with a powerful adhesive for immediate lasting contact.

Brass Radiator Key — £1.16
Your Privacy - The information entered above is not retained by our system nor passed to any third parties.

Self Adhesive Hook White — £0.40

Era BS3621 Deadlock 2.5in — £18.57
This lock can be used on wooden or steel doors, internally or externally. The deadbolt is locked and unlocked by a key from both sides of the deadlock. The new British Standard BS3621 - 2004 determines that the lock has a new thicker body with anti drill plates fitted to both sides of the lockcase. The deadbolt is of a low friction design and is thrown 20mm when activated by the key.

Satin Chrome Hat and Coat Hook — £4.45

Fire Door Keep Shut Photoluminescent — £2.81
FIRE DOOR KEEP SHUT photoluminescent sign measuring 100 x 100mm. Made from high intensity 1.3mm material with powerful adhesive undercoating. Non-radioactive, non-toxic with no lead or phosphorous.

Magnetic Catch Large — £2.56
White plastic large magnetic catch. Approximate rated pull is 7kg. Catch measures 70x17mm, plate measures 65x12mm.

In Case Of Fire.. Photoluminescent — £15.55
IN CASE OF FIRE... photoluminescent sign measuring 200 x 300mm. Made from high intensity 1.3mm material with powerful adhesive undercoating. Non-radioactive, non-toxic with no lead or phosphorous.

Victorian Satin Brass 2 Gang Dimmer (400W) — £31.64

Apollo Shaver Socket 110/240V Brown — £40.55

Polished Brass Louvre Vent 229x229mm — £13.00
Meets building regulations. Designed to fully cover treble brick aperture. Suitable for interior/exterior fresh air ventilation and warm air systems. Free airspace 8.85 mm sq. (13.7 in sq.)

Stainless Steel Barrel Bolt — £30.35
This product is suitable for use in external situations and damp environments where mild steel fittings would be prone to rusting. e.g. Houses and buildings in coastal locations.

Sign LPG Highly Flammable — £7.25
LPG HIGHLY FLAMMABLE sign measuring 200 x 300mm. Made from 0.65mm semi-rigid plastic and printed using UV resistant inks for an extended outdoor life. Fully undercoated with a powerful adhesive for immediate lasting contact.

Adjustable Roller Catch Brass Plated — £1.52
Brass plated adjustable roller catch. Face plate measures approximately 58x22mm. Length of roller catch body measures approximately 38mm. Supplied with receiver plate.

Union 65mm Upright Mortice Lock 3 Lever Satin Chrome — £20.02
This is a Union brand 3 lever sashlock used in conjunction with lever lock furniture. It measures 65mm (2.1/2in) from the face plate to the back of the lock. Supplied complete with satin face plate and zinc plated receiver, not brass as shown. The matching rebate set if required would be a Union 2979. (See rebate set section).

Antique Casement Fastener 1557 — £11.37

Antique Casement Fastener 1132 — £8.22

Drawer Runners 450mm in Pairs — £5.87
Bottom fixing epoxy coated steel drawer runners 450mm, sold in pairs. Bottom fix runners have a lip to support the base of the drawer and are screw fixed from underneath. These have a smooth running action and have a maximum load bearing of 30kg.

Pack of 10 Steel Screw Hooks 60mmx10G — £1.93

Mirror Plates 1.25in (32mm) — £0.15
Brassed mirror plate, used for hanging pictures and mirrors. Plate measures 32x32mm. The two holes at the base of the plate are used to screw the plate to the picture frame. The hole at the top of the plate is for fixing the picture to the wall.

Union 63mm Bathroom Mortice Lock Chrome — £11.73
Overall length (from face plate to back of lock) is 63mm. Backset (from face plate to centre of spindle hole) is 44.5mm. Face plate measures 22x152.5mm. Receiver plate measures 22x101mm. Lock centres (distance from centre of larger spindle hole to centre of smaller spindle hole) are 57mm.

Chrome Casement Stay 250mm — £6.57
This casement stay is fixed to the bottom rail of the window and the pins are fixed to the window frame. When the window is closed the holes in the casement stay are located horizontally over the pins to secure the window in place. The casement stay allows the window to be opened to various degrees by positioning the stay vertically over one of the pins using the different holes along the length of the stay.

Push Bar To Open Photoluminescent — £13.11
PUSH BAR TO OPEN photoluminescent sign measuring 450 x 100mm. Made from high intensity 1.3mm material with powerful adhesive undercoating. Non-radioactive, non-toxic with no lead or phosphorous.

Boiled Linseed Oil 250ml — £3.73
250ml bottle of boiled linseed oil. Ideal for oiling bare wood or can be mixed with whiting to make a paste for cleaning unlacquered antique brass. Makes an alternative to metal polish and is ideal for fine delicate pieces. (always test clean in a small hidden area first!)

Chubb Hook Bolt Mortice Lock 3M50 — £126.68
This is a 5 detainer mortice lock for sliding or hinged doors. The hook bolt clutches the lock to the door frame, whilst a steady bolt prevents the door being lifted to release the hook. It measures 70mm from the face plate to the back of the lock. Supplied complete with two satin escutcheons.

Tudor Fleur de Lys Letter Plate 371x112mm — £35.97
Tudor antique interior letterflap, measures approximately 256x84mm. To be used on the interior of the door to cover the letter plate cut out.

Zone Brass Combination Padlock 20mm — £6.03
This brass combination padlock offers the convenience of security without having to carry keys. The 3 x 10 digit code system is easily reset to your own combination (instructions included). Ideal for use on luggage or tool boxes.

Antique Casement Fastener 906HP — £11.88
This casement fastener is fitted to the side rail of the window and is supplied with a hook plate fixing. The hook plate is fitted to the window frame alongside the fastener when the window and frame are flush. A casement fastener is used like a handle to open and close the window.

Savoy Satin Chrome Euro Door Handles 48mm — £29.91
Euro profile handles have an enlarged keyhole shape cut out of the back plate. This euro cut out in the back plate is used to house a key operated cylinder. The cylinder is used with a sash lock, which consists of a latch and a deadbolt and is mortised into the edge of the door. The lock also has the euro shape cut into it to allow the cylinder to pass through and come out on the opposite side of the door. These cylinders come in various lengths depending on the thickness of the door and various...

Deco Satin Chrome EURO Door Handles 48mm — £35.66
Euro profile handles have an enlarged keyhole shape cut out of the back plate. This euro cut out in the back plate is used to house a key operated cylinder. The cylinder is used with a sash lock, which consists of a latch and a deadbolt and is mortised into the edge of the door. The lock also has the euro shape cut into it to allow the cylinder to pass through and come out on the opposite side of the door. These cylinders come in various lengths depending on the thickness of the door and various...

Gloucester Satin Chrome Euro Door Handles 48mm — £26.91
Euro profile handles have an enlarged keyhole shape cut out of the back plate. This Euro cut out in the back plate is used to house a key operated Euro Cylinder. The cylinder is used together with a Euro Sash Lock, which consists of a latch and a deadbolt and is mortised into the edge of the door. The lock also has the euro shape cut into it to allow the cylinder to pass through and come out on the opposite side of the door. These cylinders are available in various lengths to suit the thickness of...

Greenwich Satin Chrome Euro Door Handles 48mm — £24.07
Euro profile handles have an enlarged keyhole shape cut out of the back plate. This Euro cut out in the back plate is used to house a key operated Euro Cylinder. The cylinder is used together with a Euro Sash Lock, which consists of a latch and a deadbolt and is mortised into the edge of the door. The lock also has the euro shape cut into it to allow the cylinder to pass through and come out on the opposite side of the door. These cylinders are available in various lengths to suit the thickness of...

Project Milton Satin Chrome Lever Latch Door Handles — £8.03
Lever latch handles have a plain back plate. They are used in conjunction with either a mortice or tubular latch, which are normally 2.1/2in (64mm) or 3in (75mm) long, although longer sizes can be obtained if the handles need to be placed further in from the door edge. The latch is fitted into the edge of the door whereas the handles are fitted to either side of the door and are connected by a spindle located in the back of the levers. When the levers are pressed, the spindle rotates and operates...

Savoy Long Satin Chrome EURO Door Handles 48mm — £25.90
Euro profile handles have an enlarged keyhole shape cut out of the back plate. This euro cut out in the back plate is used to house a key operated cylinder. The cylinder is used with a sash lock, which consists of a latch and a deadbolt and is mortised into the edge of the door. The lock also has the euro shape cut into it to allow the cylinder to pass through and come out on the opposite side of the door. These cylinders come in various lengths depending on the thickness of the door and various...

Project Kensington Satin Chrome Lever Latch Door Handles — £9.14
Lever latch handles have a plain back plate. They are used in conjunction with either a mortice or tubular latch, which are normally 2.1/2in (64mm) or 3in (75mm) long, although longer sizes can be obtained if the handles need to be placed further in from the door edge. The latch is fitted into the edge of the door whereas the handles are fitted to either side of the door and are connected by a spindle located in the back of the levers. When the levers are pressed, the spindle rotates and operates...

Algarve Long Satin Chrome Euro Door Handles 48mm — £29.37
Euro profile handles have an enlarged keyhole shape cut out of the back plate. This euro cut out in the back plate is used to house a key operated cylinder. The cylinder is used with a sash lock, which consists of a latch and a deadbolt and is mortised into the edge of the door. The lock also has the euro shape cut into it to allow the cylinder to pass through and come out on the opposite side of the door. These cylinders come in various lengths depending on the thickness of the door and various...

Savoy Brass Euro Door Handles 48mm — £20.11
Euro profile handles have an enlarged keyhole shape cut out of the back plate. This euro cut out in the back plate is used to house a key operated cylinder. The cylinder is used with a sash lock, which consists of a latch and a deadbolt and is mortised into the edge of the door. The lock also has the euro shape cut into it to allow the cylinder to pass through and come out on the opposite side of the door. These cylinders come in various lengths depending on the thickness of the door and various...

Victoria Brass Mortice Door Knob on Latch Plate — £29.95
Mortice knob latch handles have a plain back plate. They are used in conjunction with either a mortice or tubular latch, which are normally 2.1/2in (64mm) or 3in (75mm) long, although longer sizes can be obtained if the handles need to be placed further in from the door edge. The latch is fitted into the edge of the door whereas the handles are fitted to either side of the door and are connected by a spindle located in the back of the knobs. When the knobs are rotated, the spindle also rotates and...

19mm Round Bar Lock Door Handles PAA — £11.55
Lever lock handles have a keyhole cut into the back plate. They are used in conjunction with a mortice sash lock, which is usually 2.1/2in (64mm) or 3in (75mm) wide and consists of a latch and a deadbolt. The sash lock is fitted into the edge of the door whereas the handles are fitted to either side of the door and are connected by a spindle located in the back of the levers. When the levers are pressed, the spindle rotates and operates the latch in the sash lock allowing the door to open. When the...

Pack of 10 Brass Countersunk Wood Screws 1/2in x 4g — £0.67
Solid brass countersunk head woodscrews 1/2in long 4 gauge, sold and priced in packs of 10 only. (Order 1 to receive a pack of 10 screws)

Sandown Brass Euro Door Handles 48mm — £23.53
Euro profile handles have an enlarged keyhole shape cut out of the back plate. This euro cut out in the back plate is used to house a key operated cylinder. The cylinder is used with a sash lock, which consists of a latch and a deadbolt and is mortised into the edge of the door. The lock also has the euro shape cut into it to allow the cylinder to pass through and come out on the opposite side of the door. These cylinders come in various lengths depending on the thickness of the door and various...

Sirmione Brass EURO Door Handles 48mm — £34.22
Euro profile handles have an enlarged keyhole shape cut out of the back plate. This Euro cut out in the back plate is used to house a key operated Euro Cylinder. The cylinder is used together with a Euro Sash Lock, which consists of a latch and a deadbolt and is mortised into the edge of the door. The lock also has the euro shape cut into it to allow the cylinder to pass through and come out on the opposite side of the door. These cylinders are available in various lengths to suit the thickness of...

Pack of 10 Brass Countersunk Wood Screws 1.1/4in x 6g — £1.67
Solid brass countersunk head woodscrews 1.1/4in long 6 gauge, sold and priced in packs of 10 only. (Order 1 to receive a pack of 10 screws)

Egg and Dart Brass Mortice Door Knob on Latch Plate — £39.94
Mortice knob latch handles have a plain back plate. They are used in conjunction with either a mortice or tubular latch, which are normally 2.1/2in (64mm) or 3in (75mm) long, although longer sizes can be obtained if the handles need to be placed further in from the door edge. The latch is fitted into the edge of the door whereas the handles are fitted to either side of the door and are connected by a spindle located in the back of the knobs. When the knobs are rotated, the spindle also rotates and...

Stainless 19x425 Back to Back Handles in Pairs Grade 316 — £21.94
Stainless steel D shaped pull handle on concealed fix rose. Handle diameter is 22mm, length measures 150mm. Roses are available in either 6mm or 8mm high with stainless steel inner 4 point fixing. Satin or Polished finish available, (please select from the drop down box below).

Victoria Satin Chrome Mortice Door Knob on Bathroom Plate — £34.22
Bathroom locking handles are used with a bathroom mortice lock, which is usually 2.1/2in (64mm) or 3in (75mm) wide and consists of a latch and a deadbolt. The bathroom lock is mortised into the edge of the door whereas the handles are fitted to either side of the door and are connected by a spindle located in the back of the knobs. When the knobs are rotated, the spindle also rotates and operates the latch allowing the door to open. On the handle fitted to the inside of the door there is a button...

Adam 2 Gang 2 Way Switch Brown — £9.46

Satin Stainless 19x425mm Bolt Fix Handle Grade 304 — £6.81
This is a bolt through pull handle. A bolt through pull handle is supplied with two fixing bolts that are fitted through the opposite face of the door to the pull handle and are threaded into the two ends of the handle until it is fitted flush to the door. Normally when a bolt through handle is being used, a push plate is fitted to the opposite face of the door for added strength. The hexagon heads of the bolt can be fitted so that they are visible on the surface of the push plate or they can be...

Satin Chrome Ball Centre Door Knob 3in — £15.92
This centre door knob is fitted to the external face of the door. As well as being aesthetically pleasing it is also used to assist in pulling the door closed. It is fixed by means of a threaded bolt which passes through the door and screws into the back of the door knob.

Stainless 6mm Disabled Turn and Release Grade 316 — £19.94
Stainless steel concealed fixing euro profile escutcheons, sold in pairs. Supplied with stainless steel understructure. Measures 52mm diameter, 8mm thick and has 38mm fixing centres. Available in either a polished or satin finish, (please select from the drop down box below). PLEASE NOTE: EURO PROFILE PRODUCTS ARE NOT DESIGNED FOR STANDARD MORTICE KEYS - The keyhole shaped cutout is enlarged for use with a EURO PROFILE cylinder.

Tudor antique leaf hinge, in pairs. Hinge length measures 308mm — £14.48
Tudor Hinges, Hinge Fronts and Door Studs. The products shown in this section are Tudor traditional style imported malleable iron. These products should not be mixed with the Kirkpatrick Black Antique range, which is hand crafted in the UK, as there are variations between the two finishes.

Egg and Dart Satin Chrome Mortice Door Knob on Lock Plate — £39.94
Mortice knob lock handles have a keyhole cut into the back plate. They are used in conjunction with a mortice sash lock, which is usually 2.1/2in (64mm) or 3in (75mm) wide and consists of a latch and a deadbolt. The sash lock is fitted into the edge of the door whereas the handles are fitted to either side of the door and are connected by a spindle located in the back of the knobs. When the knobs are rotated, the spindle also rotates and operates the latch in the sash lock allowing the door to open...

Antique Rim Knobs and Plain Escutcheon 1553a — £34.33
Rim furniture is used in conjunction with a rim lock or latch that is fitted to the outside face of the door as opposed to a mortice lock, which is fitted into the door edge. Rim furniture consists of two knobs, (one with a fixed rose and one without a rose), a spindle and screws. Sometimes a single escutcheon is also supplied. The knob with the fixed rose is fitted to the opposite side of the door to the lock and is fixed to the door in the normal way usually using screws located through the holes...

Antique Style Brass Lock Door Handles 152x38mm 2439 — £55.69
Lever lock handles have a keyhole cut into the back plate. They are used in conjunction with a mortice sash lock, which is usually 2.1/2in (64mm) or 3in (75mm) wide and consists of a latch and a deadbolt. The sash lock is fitted into the edge of the door whereas the handles are fitted to either side of the door and are connected by a spindle located in the back of the levers. When the levers are pressed, the spindle rotates and operates the latch in the sash lock allowing the door to open. When the...

Howard Brass EURO Door Handles 48mm — £23.53
Euro profile handles have an enlarged keyhole shape cut out of the back plate. This Euro cut out in the back plate is used to house a key operated Euro Cylinder. The cylinder is used together with a Euro Sash Lock, which consists of a latch and a deadbolt and is mortised into the edge of the door. The lock also has the euro shape cut into it to allow the cylinder to pass through and come out on the opposite side of the door. These cylinders are available in various lengths to suit the thickness of...

Project Malvern Satin Chrome Round Rose Door Handles — £7.11
Levers on rose handles can be used with a latch where the door is not required to lock; a bathroom lock where you would also need to use a turn and release; or a mortice sash lock where you would also need to use a pair of escutcheons. The locks and latches are usually 2.1/2in (64mm) or 3in (75mm) wide, although longer sizes can be obtained if the handles need to be placed further in from the door edge. When using the levers with a turn and release or escutcheons, these are fitted directly below...

Project Luca Satin Chrome Lever Lock Door Handles — £9.14
Lever lock handles have a keyhole cut into the back plate. They are used in conjunction with a mortice sash lock, which is usually 2.1/2in (64mm) or 3in (75mm) wide and consists of a latch and a deadbolt. The sash lock is fitted into the edge of the door whereas the handles are fitted to either side of the door and are connected by a spindle located in the back of the levers. When the levers are pressed, the spindle rotates and operates the latch in the sash lock allowing the door to open. When the...

Chrome Fanlight Opener (Screw Type) 8in — £17.89
These are typically used on skylights or top hung sash windows. The screwed part of the opener is fiited to the window and the plate is fitted to the frame. The window is opened and closed by rotating the opener.

Mayfair 2 Gang 2 Way Switch White — £9.46
Mayfair stepped edge brass 2 gang, 2 way rocker switch with white insert.

Pewter Finish Bolt Cranked 152 x 45mm 1155 — £19.34
Pewter finish cranked bolt, same item and size as I449541 but the bolt is cranked instead of straight.

Sorrento Donna Satin Chrome Latch Door Handles — £16.79
Lever latch handles have a plain back plate. They are used in conjunction with either a mortice or tubular latch, which are normally 2.1/2in (64mm) or 3in (75mm) long, although longer sizes can be obtained if the handles need to be placed further in from the door edge. The handles are supplied complete with the spindle and fixing screws, but not with the latch, which needs to be purchased as a separate item, and is normally specified to have a matching finish to the handles.

Project Kensington Chrome Bathroom Door Handles — £11.18
Bathroom locking handles are used with a bathroom mortice lock, which is usually 2.1/2in (64mm) or 3in (75mm) wide and consists of a latch and a deadbolt. The bathroom lock is mortised into the edge of the door whereas the handles are fitted to either side of the door and are connected by a spindle located in the back of the levers. When the levers are pressed, the spindle rotates and operates the latch allowing the door to open. On the handle fitted to the inside of the door there is a button which...

5/8inx13g Brass Chain in Mtrs — £5.60

Rawnsley 1876 Black Door Knocker 9.5in (242mm) WPE906 — £54.40
Rawnsley hand crafted iron door knocker produced to original authenticated pattern, dated 1876. Length 9.1/2 inches (242mm). Width (at widest point on back plate) 80mm.

Rawnsley Drawer Pull T1020 — £5.70
This design is reproduced from an original Victorian pattern, authenticated by the Victoria and Albert Museum and the Black Country Museum.

Louis Fraser Antique Pewter Hinges 139mm In Pairs — £28.37
The strap of this hinge is screwed to the door surface and the knuckle is fitted to the door frame. Similar to a tee hinge but a lot more decorative, the strap of the hinge helps to support the weight of the door.

Antique Casement Stay 279mm. 857 — £11.27
This casement stay is fixed to the bottom rail of the window and the pins are fixed to the window frame. When the window is closed the holes in the casement stay are located horizontally over the pins to secure the window in place. The casement stay allows the window to be opened to various degrees by positioning the stay vertically over one of the pins using the different holes along the length of the stay.

Rising Butt Hinge Steel Left Hand 3in (76mm) In Pairs — £2.73
Rising butt hinges can be used where the door is required to rise to clear an obstruction such as a carpet. The door will rise by approximately 6mm when it is opened to 90 degrees. Rising hinges will self close the door which is useful on toilet doors and cubicles. It is important to remember that the top of the door must be cut away on the hanging side to allow the door to rise as it opens. Due to the door having to be cut away these hinges are not suitable for use on fire doors.

Project Kensington Brass Lever Lock Door Handles — £9.14
Lever lock handles have a keyhole cut into the back plate. They are used in conjunction with a mortice sash lock, which is usually 2.1/2in (64mm) or 3in (75mm) wide and consists of a latch and a deadbolt. The sash lock is fitted into the edge of the door whereas the handles are fitted to either side of the door and are connected by a spindle located in the back of the levers. When the levers are pressed, the spindle rotates and operates the latch in the sash lock allowing the door to open. When the...

Antique Style Brass Latch Door Handles 152x47mm 2451 — £55.69
Lever latch handles have a plain back plate. They are used in conjunction with either a mortice or tubular latch, which are normally 2.1/2in (64mm) or 3in (75mm) long, although longer sizes can be obtained if the handles need to be placed further in from the door edge. The latch is fitted into the edge of the door whereas the handles are fitted to either side of the door and are connected by a spindle located in the back of the levers. When the levers are pressed, the spindle rotates and operates...

Black Iron Casement Fastener 3365MP — £10.22
This casement fastener is fitted to the side rail of the window and is supplied with a mortice plate fixing. This fixing is fitted to the frame of a rebated window, adjacent to the fastener. A slot is morticed out behind the plate to house the projection of the fastener when the window is in the closed position.

Antique Hinge Fronts 457 x 152mm. 798 In Pairs — £33.21
This hinge front is screwed to the face of the door and is intended for decorative purposes only. The hinge front does not have a leaf and so cannot be used to hang the door.

Pewter Finish Bolt Straight 152 x 45mm 1155 — £19.34
Pewter finish straight bolt, the plate measures 152x45mm. Supplied complete with keep and screws.

Chrome covered escutcheon, diameter measures 1.1/4in (32mm) — £2.90
Chrome euro escutcheon, measures 47.6x65.5mm. Self adhesive using stabilised all weather adhesive so no drilling or tapping required. Can be used to cover cut out mistakes or on hollow doors where screws cannot be used. PLEASE NOTE: EURO PROFILE PRODUCTS ARE NOT DESIGNED FOR STANDARD MORTICE KEYS - The keyhole shaped cutout is enlarged for use with a EURO PROFILE cylinder.

Antique Style Brass Casement Stay 254mm 1180 — £32.48
This casement stay is fixed to the bottom rail of the window and the pins are fixed to the window frame. When the window is closed the holes in the casement stay are located horizontally over the pins to secure the window in place. The casement stay allows the window to be opened to various degrees by positioning the stay vertically over one of the pins using the different holes along the length of the stay.

Paris Solid Nylon Radius Latch Door Handles — £22.85
Solid nylon 21mm lever on radius latch plate, unsprung. Plate measures 165x46mm. Suitable for fitting to doors from 35 to 50mm thick. Supplied complete with wood screw fixings and 8mm spindle. These levers should be used in conjunction with a heavy duty mortice latch to provide a spring action (not included). Please select colour required from the drop down box below.

Antique Bolt Straight 203mm X 50mm 1156 — £19.75

Antique Mortice Door Knobs and Covered Escutcheon 1553 — £38.61
Antique mortice knob, in pairs. The knob measures 60x38mm and the plate measures 66x50mm. Supplied with two covered escutcheons.

Antique Cupboard Knob 35mm to Bolt 1195 — £5.39

Satin Chrome 2in (51mm) Self Adhesive Numeral C1568 — £2.28
Satin chrome self adhesive numeral, measures 2in (51mm). Please state which numeral you require in the drop down box below. (Please note image shows chrome finish).

Rawnsley 1890 Black Letter Plate 10in (254mm) T540 — £32.95
Rawnsley hand crafted iron letter plate produced to original authenticated pattern, dated 1890. The overall size is 254x65mm, aperture 184x27mm. Please note this small aperture is suitable for letters only. All dimensions are approximate, cast iron can vary by 5% as it cools. Aperture size does not indicate the cut out size, this needs to be determined during fitting.

Milton lever lock satin chrome handles, in pairs. Dimensions of plate are 171 x 42mm. This set includes spindle and screws — £8.03
Milton euro profile satin chrome handles, in pairs. Dimensions of plate are 171 x 42mm. This set includes spindle and screws. Handles require a euro profile cylinder and lock case (not included), 48mm centres. PLEASE NOTE: EUROPROFILE PRODUCTS DO NOT HAVE STANDARD KEYHOLES - Choose LOCK door handles for standard keyholes.

Project Luca Brass Lever Lock Door Handles — £9.14
Lever lock handles have a keyhole cut into the back plate. They are used in conjunction with a mortice sash lock, which is usually 2.1/2in (64mm) or 3in (75mm) wide and consists of a latch and a deadbolt. The sash lock is fitted into the edge of the door whereas the handles are fitted to either side of the door and are connected by a spindle located in the back of the levers. When the levers are pressed, the spindle rotates and operates the latch in the sash lock allowing the door to open. When the...

Paris Solid Nylon Radius Oval Door Handles — £22.85
Solid nylon 21mm lever on radius oval profile plate, unsprung. Plate measures 165x46mm. Oval centres (distance from centre of spindle to centre of cylinder) measure 48.5mm. Suitable for fitting to doors from 35 to 50mm thick. Supplied complete with wood screw fixings and 8mm spindle. These levers should be used in conjunction with an oval profile cylinder and heavy duty oval mortice lock to provide a spring action (not included). Please select colour required from the drop down box below.

Chrome Pull Handle on Plate 460x76mm — £99.83
Polished chrome pull handle on backplate. Backplate dimensions are 460x76mm and the thickness is 13mm. Handle length measures 332mm and has a projection of 89mm.

Antique Hinge Fronts 457 x 146mm. 819 In Pairs — £31.46
This hinge front is screwed to the face of the door and is intended for decorative purposes only. The hinge front does not have a leaf and so cannot be used to hang the door.

Project Avon Satin Chrome EURO Door Handles — £8.03
Euro profile handles have an enlarged keyhole shape cut out of the back plate. This euro cut out in the back plate is used to house a key operated cylinder. The cylinder is used with a sash lock, which consists of a latch and a deadbolt and is mortised into the edge of the door. The lock also has the euro shape cut into it to allow the cylinder to pass through and come out on the opposite side of the door. These cylinders come in various lengths depending on the thickness of the door and various...

Louis Fraser Antique Pewter Straight Door Bolt 101mm — £16.74

Sorrento Fluo Dual Finish Lever Door Handles — £19.45
Levers on rose handles can be used with a latch where the door is not required to lock; a bathroom lock where you would also need to use a turn and release; or a mortice sash lock where you would also need to use a pair of escutcheons. The locks and latches are usually 2.1/2in (64mm) or 3in (75mm) wide, although longer sizes can be obtained if the handles need to be placed further in from the door edge. When using the levers with a turn and release or escutcheons, these are fitted directly below...

Double Action Spring Hinges Zinc Plated 75mm In Pairs — £16.47
Double action spring hinges are for use in a situation where the door is required to swing in either direction. Please note that where the corners of the door meet with the corners of the hanging strip, they should be chamfered to allow the door to swing through smoothly.

Paris Steel Cored Radius Lock Door Handles — £29.39
Steel cored nylon 21mm lever on radius lock plate, unsprung. Plate measures 165x46mm. Suitable for fitting to doors from 35 to 50mm thick. Supplied complete with wood screw fixings and 8mm spindle. These levers should be used in conjunction with a heavy duty mortice lock to provide a spring action (not included). Please select colour required from the drop down box below.